Metals & Alloys News

All News
Wednesday, 05. March 2014

Elkem - The Global Supplier

Elkem enters into joint venture for ferrosilicon production in ParaguayTo obtain a strategic foothold in South America, Elkem has entered into a 50/50 joint venture with the Argentinean investors Grupo Andreani and Grupo Araujo...[more]


Monday, 02. December 2013

KAMAZ OJSC and ELKEM AS sign 2014 supply agreement

KAMAZ OJSC and ELKEM AS have recently signed a direct supply agreement for 2014 with a contract value of over 2.5 million EURO.This agreement strengthens the long-term relationship between the two companies. KAMAZ and ELKEM have...[more]


Thursday, 14. November 2013

FOUNDRY SOLUTIONS & DESIGN, LLC

Foundry Solutions & Design (FS&D) meets all expectations at the recent METAL KIELCE, the Polish Foundry Exposition in Kielce, Poland.Exhibiting for the first time at the Metal Kielce in Poland, FS&D was overwhelmed...[more]


Wednesday, 04. September 2013

Topseed® cover alloy. Improving the way you make ductile iron.

Elkem’s recently introduced cover alloy, Topseed®, is changing the way that our customers think about their magnesium ferrosilicon treatment process.Designed to, Improve magnesium recoveryConditions the reaction slagIncrease...[more]


Monday, 08. July 2013

Watts Inaugurates FS&D Designed Foundry

Watts Water Technologies “cut the ribbon” on its new Franklin, NH foundry where it will exclusively cast lead free products.The plant, inaugurated by New Hampshire Governor Maggie Hassan and company President and CEO David...[more]


Tuesday, 25. June 2013

Trimet: Seven millionth ton of aluminium produced in the foundry

At the Essen plant of TRIMET Aluminium SE, the seven millionth ton of aluminium was produced in the past week since the foundry's foundation. The jubilee aluminium was delivered in the form of highly specialised slabs to the...[more]


Monday, 24. June 2013

ProTEC Marketing: Economic Appraisals and Strategic Planning 2013

Expert Survey in the Steel and Foundry IndustryTechnology and cost management as well as international competitiveness - these are the challenges of the highest priority for strategic objectives for the companies in the steel and...[more]


Thursday, 13. June 2013

Foundry Solutions & Design: A Leading Source of Foundry Engineering

Foundry Solutions & Design, a major North American provider of foundry consulting, engineering, and project management, is currently working with Ellwood Engineered Castings, a leading supplier of gray and ductile iron...[more]


Monday, 27. May 2013

Topseed® - Elkem leads the way in offering attractive cost savings to ductile iron foundries

 The use of magnesium additions in ductile cast irons Elkem introduces “Topseed® cover alloy” - another big step forward in reducing magnesium addition and lowering production costs in ductile iron foundries.The use of...[more]


Wednesday, 22. May 2013

ASK Chemicals: Farewell chunky graphite thanks to SMW inserts™

The production of high-stress cast parts made from cast iron with nodular graphite is a particular challenge for foundries, as high demands, amongst other things, are made on the inoculation technique used and the inoculants. The...[more]


Thursday, 04. April 2013

FerroPem promotes Inobar® as cover of FeSiMg to enhance Mg recovery

Since many years, FerroPem is promoting Inobar® as a pre-conditioner for both grey and ductile iron.The concept of pre-conditioning the iron with high barium content inoculant, together with the usage of late stream inoculation,...[more]


Thursday, 14. March 2013

LKR Leichtmetallkompetenzzentrum Ranshofen GmbH in Austria published the proceedings for the conference

„7. Ranshofener Leichtmetalltage 2012“. The papers are about light metals technology and its future application fields: Energy-efficient Mobility – Chances of the Materials and Process technology.also available in:...[more]


Monday, 07. January 2013

Inoculation of Cast Iron

From W. MASCHKE, M. JONULEITThe addition of an inoculant to molten cast iron is advisable and even necessary in most cases, in order to be able to produce castings which fulfill the quality requirements. The mechanical properties...[more]


Wednesday, 05. December 2012

Asmet’s Review of AMRC - Namtec Annual Conference 2012

Asmet was pleased to exhibit at the successful Namtec - AMRC Annual Conference on Wednesday 17th October.The event was well attended by a large number of delegates from leading companies in the metals sector including Boeing,...[more]


Tuesday, 04. December 2012

Werkstoffdesign von GJL unter Nutzung thermodynamischer Berechnungen

Inoculation Theories & Reality: Dr. Torbjörn Skaland, Director of Technology Elkem Foundry Division Kristiansand, Norway.more info: 20120910_SKALAND_Inoculation_Theories__2_Werkstoffdesign von GJL unter Nutzung...[more]


Tuesday, 20. November 2012

ELKEM - PRESEED™ PRECONDITIONER

A PRECONDITIONING AGENT FOR ALL CAST IRONS Consistency in base irons leading to more uniform casting propertiesImproved graphite morphologyReduced shrinkage and carbide formationImproved mechanical propertiesReduction in pig...[more]


Tuesday, 20. November 2012

Metalcasting Growth Strategies: How Foundries Make their Money

Foundry strategist, Mike Swartzlander offers perspectives on metalcasting business models and discusses their merits from a growth strategy perspectiveClick here to read more...[more]


Tuesday, 23. October 2012

Ankiros Istanbul 2012 and Metalurgia Joinville 2012

Ankiros Istanbul 2012 and Metalurgia Joinville 2012  have been a great success for Künkel Wagner Prozesstechnologie GmbH! Our booths in Turkey and Brazil were very popular among visitors and we would like to thank them all...[more]


Monday, 17. September 2012

Elkem organized a technical seminar for iron foundries

On 10. and 11.September 2012 Elkem organized a technical  seminar for iron foundries in Weinheim, Germany. Weinheim is located ca. 50 km south of Frankfurt. This was the 3rd seminar organized for Elkem Foundry Products...[more]


Monday, 27. August 2012

Elkem Foundry Products has recruited Cor Oldenziel as Regional Director Sales & Marketing ASIA/MEA.

Cor has a long experience in international sales and marketing with international postings in Dubai (UAE) and Kristiansand (Norway). This is a further step taken by Elkem to strengthen the focus on growth in Asia and to support...[more]


Displaying 1 to 20 of 40

Suppliers for Metals & Alloys

Andritz Metals

Austria
Main Categories:

    Sub Categories:

       

      Videos

      Most popular hits