Market of used machines

2007-09-03

Picture >>> Picture >>> Picture >>>

MF-Induction Furnace Plant 2x5to

Built in

1998

Manufacturer:

Junker
MFT Ge 5000 DUOMELT

inquiry to:

Throughput:

TCT Tesic GmbH
Im Kurzen Busch 11
58640 Iserlohn
Germany
Tel:
02371 / 7726 0
Fax:
02371 / 7726 10
Email:
infotct-tesic.com

Specs.:

Capacity: 2 x 5.000 kg
Connected voltage: 2460 V
Frequency: 250 Hz
The plant mainly consists of:
- 2 nos. MF crucible furnace bodies with tilt frame, hydr. cylinders & furnace lids with Exhaust Hood
- 1 no. Frequancy Inverter cabinet 3000kW/250Hz, DUOMELT, steples power distribution
- 2 nos Capacitor raks
- 1 no. Operating panel with JOKS contr. system and weighing device;
- 1 no. Oil transformer 3600kVA/20kV
- 3 nos. Recooling systems for Inverter, cooling tower & Coil (new)section with control cabinet
- 1 no. Hydraulic power pack(new)
- 2 sets Water flow monitoring (new)
- Spare parts can be offered optionally on request .
as seen, ex Warehouse, already dismantled

2007-09-03

Picture >>> Picture >>> Picture >>>

NF-Induction Furnace Plant 20 to

Built in

1973

Manufacturer:

ABB/BBC
IT9

inquiry to:

Throughput:

TCT Tesic GmbH
Im Kurzen Busch 11
58640 Iserlohn
Germany
Tel:
02371 / 7726 0
Fax:
02371 / 7726 10
Email:
infotct-tesic.com

Specs.:

consisting of:
- Furnace body, 20 to with hydr. lid
- Tilting chair and 2 hydraulic cylinders
- Hydraulic power pack with operating panel
- Electr. switch unit 4000 kW
- Electr. control panel with contactors
- 3-phase oil transformer 5000 kVA; 10 kV; 50 Hz
- nominal voltage 10.000 +- 5% / 2460 - - - 600 V
(10 steps)
- 1 Set PCB-free capacitors (new1994) water cooled
- with out cooling system, in operating condition
ex works Duesseldorf, incl. dismantling & loaded on truck

2007-09-03

Picture >>> Picture >>> Picture >>>

MF-Induction Melting Plant 2 x 5to (Refurbished)

Built in

1989

Manufacturer:

Inductotherm
VIP Power Trak 3000/250 Hz

inquiry to:

Throughput:

TCT Tesic GmbH
Im Kurzen Busch 11
58640 Iserlohn
Germany
Tel:
02371 / 7726 0
Fax:
02371 / 7726 10
Email:
infotct-tesic.com

Specs.:

mainly consisting of:
- 2 nos. MF furnace bodies, 5 to each, with lid,
hydraulic tilt chairs and hydraulic cylinders
- 1 no. hydraulic power pack
- 1 no. inverter panel 3000 kW/ 250Hz with capacitor
rack and changeover switch unit
- 1 no. oil-transformer 3950 kVA, 11 kV input
- 1 no. water re-cooloing unit (primary circuit)
- 1 no. Crucible Push Out Device
The plant will be supplied in refurbished condition!
ex works

2007-09-03

Picture >>> Picture >>> Picture >>>
Picture >>>

MF-Induction Furnace 8 to

Built in

1997

Manufacturer:

Inductotherm
VIP Power Trak

inquiry to:

Throughput:

TCT Tesic GmbH
Im Kurzen Busch 11
58640 Iserlohn
Germany
Tel:
02371 / 7726 0
Fax:
02371 / 7726 10
Email:
infotct-tesic.com

Specs.:

Plant mainly consists of:
- 1 x 8 to Induction Furnace body with hydraulik tilt,
furnace chair unit and 2 hydraulic cylinders
- 1 x Converter Panel 7000 kW / 200 Hz
- 1 x 3-ph.-Oil-Transformer 8000 kVA /
11000 / 575 V
- 1 x hydraulic powerpack
- 1 x Spare Coil
but with out water re-cooling unit
As seen, already dismantled

2007-09-03

Picture >>> Picture >>> Picture >>> 
Picture >>>

MF-Induction Furnace Plant

Built in

1995

Manufacturer:

Junker
MFT Ge 5000

inquiry to:

Throughput:

TCT Tesic GmbH
Im Kurzen Busch 11
58640 Iserlohn
Germany
Tel:
02371 / 7726 0
Fax:
02371 / 7726 10
Email:
infotct-tesic.com

Specs.:

Capacity: 5.000 kg
Overheating about 100°C: 4.500 kg/h
Connected Load: 400 V
Frequency: 250 Hz
with weighing device; Ring fume suction, Gas-preheater station
as seen, without dismantling, ex works

2007-09-03

Picture >>> Picture >>> Picture >>>

3-Freq.-Cruible-Furnace 2 x 1,2 to

Built in

1980

Manufacturer:

Junker
2 TFTCU 1.200

inquiry to:

Throughput:

TCT Tesic GmbH
Im Kurzen Busch 11
58640 Iserlohn
Germany
Tel:
02371 / 7726 0
Fax:
02371 / 7726 10
Email:
infotct-tesic.com

Specs.:

mainly consists of:
- 2 furnace bodies of 1.200 kg with tilting chair, hydraulic cylinders
- hydraulic powerpack with control panel
- with PCB-free capacitors primary/secondary compensation
- DS-oil transformer 740 kVA
primary: 10.000 V; 50 Hz - secondary: 1.000 V; 50 Hz
- control panel
- furnace switch over
- spare coil
without recooling unit
two furnace bodies fully refurbished
in good condition, dismantled, as is where is, ex works

2007-09-03

Picture >>> Picture >>>

Hanger Type Pouring Units

Built in

1998

Manufacturer:

Foundry Automation
GS350

inquiry to:

Throughput:

TCT Tesic GmbH
Im Kurzen Busch 11
58640 Iserlohn
Germany
Tel:
02371 / 7726 0
Fax:
02371 / 7726 10
Email:
infotct-tesic.com

Specs.:

consisting of:
- 2x Pouring units
- 2x Pouring ladles
- 2x Ladle heating burner
already dismantled
as seen

2007-09-03

Picture >>> Picture >>> Picture >>>

Traveling Pouring Machine 1000 kg

Built in

2000 (neuwertig)

Manufacturer:

Foundry Automation

inquiry to:

Throughput:

TCT Tesic GmbH
Im Kurzen Busch 11
58640 Iserlohn
Germany
Tel:
02371 / 7726 0
Fax:
02371 / 7726 10
Email:
infotct-tesic.com

Specs.:

Mainly consisting of:
- Base frame with controlled traveling gear
- Ladle tilting device, hydraulically operated
- Ladle spout can be freely positioned
- Roller track for change of ladles
- Electro-hydraulical control system
- Driver's cabin, enclosed
- Push out device for ladles
- 2 pcs. Pouring ladles, each cap.1000 kg
without dismantling, as seen

2007-09-03

Picture >>> Picture >>> Picture >>>

Continius Mixer 15 t/h

Built in

84/03

Manufacturer:

GFA
Three-flute mixer

inquiry to:

Throughput:

TCT Tesic GmbH
Im Kurzen Busch 11
58640 Iserlohn
Germany
Tel:
02371 / 7726 0
Fax:
02371 / 7726 10
Email:
infotct-tesic.com

Specs.:

electrical connected load approx. 20 kW
throat:
- behind transport screw approx. 3 m
- pre-mixer approx. 2 m
- ready mixer approx. 1,3 m
Dosing pump hardener
Dosing pump resin
Working voltage: 400 V, 50 Hz
control cabinet with new Siemens S7-PLC, year: 2003
dismantled, partly overhoulded
as seen, ex stock Gelsenkirchen

2007-09-03

Picture >>>

Sand Plant 50 to/h

Built in

1983/1990

Manufacturer:

WEBAC/SIMPSON/DISA
Speedmullor 88B

inquiry to:

Throughput:

TCT Tesic GmbH
Im Kurzen Busch 11
58640 Iserlohn
Germany
Tel:
02371 / 7726 0
Fax:
02371 / 7726 10
Email:
infotct-tesic.com

Specs.:

consisting of:
- 1 no. Sand Mixer
Make: Webac
Type: Spead Mullor 88B
- 1 no Sand Cooler
Make: Simpson
Type: MC100
- 1 no. Overbelt Magnet Separator
- 1 no. Polygone Sieve
- 1 no. Sand Aerator
- 1 no. Bucket Elevator
- 1 no. Pneumatic Conveyor for new sand & Additives
- Various Sand Conveyor Belts
- 2 no. Sand Silos, 50 to capacity each
- Complete Electrical Control Make DISA
- Complete Sand Laboratory (various instruments also Make +GF+)
without dismantling, as seen
ex works

2007-09-03

Picture >>>

Polygonal Sieve

Built in

1997

Manufacturer:

Webac
W 70

inquiry to:

Throughput:

TCT Tesic GmbH
Im Kurzen Busch 11
58640 Iserlohn
Germany
Tel:
02371 / 7726 0
Fax:
02371 / 7726 10
Email:
infotct-tesic.com

Specs.:

- Capacity at a mesh size of 12 x12 mm: appr. 70 m²/h
- Exhaust: 3500 m³/h
- Drive: electr. gear motor with brake
- with additional brake
- with safety equipment for inspection lid,
emergency-stop, standstill-monitoring
already dismantled
as seen, ex- warehouse

2007-09-03

Picture >>>

Chamber Type Annealing Furnace

Built in

1996

Manufacturer:

IOB
006

inquiry to:

Throughput:

TCT Tesic GmbH
Im Kurzen Busch 11
58640 Iserlohn
Germany
Tel:
02371 / 7726 0
Fax:
02371 / 7726 10
Email:
infotct-tesic.com

Specs.:

Charging material: GG and GGG
Charging capacity: max. 20 to + 1 to for rust
Dimensions:
Depth: 2000 mm, Width: 4000 mm, Height: 2000 mm
max. furnace temperature: 900°C
Heating medium: natural gasoline Hu= 8600 Kcal/Nm³
No. of burners: 5
No of cooling nezzles: 6
Air cooling unit: 2-times with stopper
and cooling fan for fast cooling
Drive for door: hydraulic
Drive for cooling unit: hydraulic
Air cooling doors: hydraulic
Gas connection requirement: approx.: 70 Nm³/h
Connected load for power: 19,5 kW
as seen, ex works, without dismantling

2007-09-03

Picture >>>

Amine Gasing Device

Built in

1991

Manufacturer:

Lüber
LW FDA 825

inquiry to:

Throughput:

TCT Tesic GmbH
Im Kurzen Busch 11
58640 Iserlohn
Germany
Tel:
02371 / 7726 0
Fax:
02371 / 7726 10
Email:
infotct-tesic.com

Specs.:

heater: 8 Kw, 380/220 V, 50 Hz,
cleaned
as seen, ex works

2007-09-03

Picture >>>

Core Sand Preparation and Distribution Plant

Built in

1991

Manufacturer:

Michel
KAA

inquiry to:

Throughput:

TCT Tesic GmbH
Im Kurzen Busch 11
58640 Iserlohn
Germany
Tel:
02371 / 7726 0
Fax:
02371 / 7726 10
Email:
infotct-tesic.com

Specs.:

Capacity: max. 100 kg. each charge
Mixing cycle: 2 min. each charge appr.
Capacity per hour: 2 - 2.5 t/h
The plant was used to supply cold box core sand to 4 core shooters.
Capacity: max. 100 kg. each charge
Mixing cycle: 2 min. each charge appr.
Capacity per hour: 2 - 2.5 t/h
The plant was used to supply cold box core sand to 4 core shooters.
Plant mainly consists of:
- 1 no. High duty Ball type mixer M100
- 1 no. Automatic binder dosing device BDA-2PE-10/10-W
- 1 no. Core sand distribution trolley
- 1 no. Electrical panel with PLC control
already dismantled and available immediately
as seen

2007-09-03

Picture >>>

DISA - Moulding Line
2013 MK4 A-LP

Built in

1986

Manufacturer:

DISA Denmark

inquiry to:

Throughput:

TCT Tesic GmbH
Im Kurzen Busch 11
58640 Iserlohn
Germany
Tel:
02371 / 7726 0
Fax:
02371 / 7726 10
Email:
infotct-tesic.com

Specs.:

mainly consisting of:
- DMM DISA - Moulding machine 2013 MK4A-LP; Mould size: 480x600x100-330 mm
ONLY 1.7 Million moulds produced so far!
- SSU Sand supply unit
- AMC Automatic mould conveyor 18 m
- Electr. Switch & Control panel
- Vibratory Shake out conveyor Make:ACME with noise-dampening housing
- Vibratory conveyor for casting transport, Make: ACME
- Monorail hanger type pouring system with unheated pouring ladles
already dismantled, as seen, ex Works

2007-09-03

Picture >>>

Manipulator 80 kg

Built in

1980

Manufacturer:

Thyssen Henschel
Andromat AM 220 T3

inquiry to:

Throughput:

TCT Tesic GmbH
Im Kurzen Busch 11
58640 Iserlohn
Germany
Tel:
02371 / 7726 0
Fax:
02371 / 7726 10
Email:
infotct-tesic.com

Specs.:

Lenghts of shoulder arm: 1800 mm
Elbow lenghts: 2700 mm
Distance to Vibro-conveyor: 3075 mm
Manipulating weight: approx. 100 kg
Swivel: 180°
Tilt: 90°
Roll: 270°
Azimuth: 270°
Connected load: 16 kW with 380 V
Control Voltage: 24 V DC
Overhoulded

2007-09-03

Picture >>>

Manipulator 220 kg

Built in

1981

Manufacturer:

Thyssen Henschel
Andromat AM 500 T4

inquiry to:

Throughput:

TCT Tesic GmbH
Im Kurzen Busch 11
58640 Iserlohn
Germany
Tel:
02371 / 7726 0
Fax:
02371 / 7726 10
Email:
infotct-tesic.com

Specs.:

Lenghts of shoulder arm: 2100 mm
Elbow lenghts: 3150 mm
Distance to Vibro-conveyor: 2000 mm
Manipulating weight: approx. 270 kg
Swivel: 180°
Tilt: 90°
Roll: 270°
Azimuth: 300°
Connected load: 23 kW with 380 V
Control Voltage: 110 V
Overhoulded

2007-09-03

Picture >>>

Filterplant
63.000 m³/h

Built in

1998

Manufacturer:

Löhr
DWF 3,0/6,5/2,5/68/84

inquiry to:

Throughput:

TCT Tesic GmbH
Im Kurzen Busch 11
58640 Iserlohn
Germany
Tel:
02371 / 7726 0
Fax:
02371 / 7726 10
Email:
infotct-tesic.com

Specs.:

2005-07-11

Picture >>>

Core Shooter Machine
H25 J 

Built in

1986

Manufacturer:

HANSBERG

inquiry to:

Throughput:

Nicolas L. Epiphaniou
Epiphaniou Scrap MetalsLtd
Office Tel: +357 22 793390
Fax: +357 22 431534
Mobile: +357 99 419777
www.epiphaniouscrap.com
scrap@epiphaniou.com 

Specs.:

serial no. 28

2005-07-11

Picture >>>

Core Shooter Machine
H40 J

Built in

1990

Manufacturer:

HANSBERG

inquiry to:

Throughput:

Nicolas L. Epiphaniou
Epiphaniou Scrap MetalsLtd
Office Tel: +357 22 793390
Fax: +357 22 431534
Mobile: +357 99 419777
www.epiphaniouscrap.com
scrap@epiphaniou.com 

Specs.:

serial no. 21

2005-07-11

Picture >>>

Muller Mixer KB 40

Built in

Manufacturer:

RICHARDS (Vulcan)

inquiry to:

Throughput:

Nicolas L. Epiphaniou
Epiphaniou Scrap MetalsLtd
Office Tel: +357 22 793390
Fax: +357 22 431534
Mobile: +357 99 419777
www.epiphaniouscrap.com
scrap@epiphaniou.com 

Specs.:

Serial no. 8102

2005-11-14

Picture >>>

Shoot Blast Machine

Built in

Manufacturer:

PANGBORN

inquiry to:

Throughput:

Nicolas L. Epiphaniou
Epiphaniou Scrap MetalsLtd
Office Tel: +357 22 793390
Fax: +357 22 431534
Mobile: +357 99 419777
www.epiphaniouscrap.com
scrap@epiphaniou.com

Specs.:

2005-07-11

gas-fired billet heater plant 

Built in

1999

Manufacturer:

JUNKER

inquiry to:

Throughput:

Heating of approx. 3 tonnes/hr of MS58 to 750°C

OTTO-JUNKER GmbH
Jürgen Rollesbroich
Tel.: +49 (2473) 601 498
Fax: +49 (2473) 601 615
www.otto-junker-group.com
ponotto-junker.de 

Specs.:

Billet diameter: 254-320 mm
Billet length: 350-850 mm
Billet temperature: max. 780°C

Equipment Components:  Feeding device, discharge gripper, roller conveyor in the heater, preheat chamber, direct gas-fired heating section with flat flame burner and combustion ari preaheating, divided into three control zones with their own temperature measuring devices as well as the associated switchgear with Siemens PLC (S/) and an operator control panel (OP27)

2005-06-08

shotblasting machine  

Built in

2004

Manufacturer:

Wire Mesh Belt Machine RDGE 800-4

Capacity:

Rösler Oberflächentechnik GmbH
Vorstadt 1
96190 Untermerzbach
Tel.: +49 / 9533 / 924-0
Fax: +49 / 9533 / 924-300
www.rosler.com

Specs.:

Continuous Conveyor Through Feed SBM 1520  Working hours 100 h 

2005-06-08

shotblasting machine  

Built in

2002

Manufacturer:

Capacity:

Rösler Oberflächentechnik GmbH
Vorstadt 1
96190 Untermerzbach
Tel.: +49 / 9533 / 924-0
Fax: +49 / 9533 / 924-300
www.rosler.com

Specs.:

Wire Mesh Belt Machine RDGE 800-4 Working hours 1000 h

2005-06-08

shotblasting machine  

Built in

2002/2003

Manufacturer:

Capacity:

machine for exhibitions, 0

Rösler Oberflächentechnik GmbH
Vorstadt 1
96190 Untermerzbach
Tel.: +49 / 9533 / 924-0
Fax: +49 / 9533 / 924-300
www.rosler.com

Specs.:

Blasting Cabinet ST 1000 PS 

2005-06-08

shotblasting machine  

Built in

2002/2003

Manufacturer:

Tumble Belt Batch Machine RMBC 2.1

Capacity:

machine for exhibitions,

Rösler Oberflächentechnik GmbH
Vorstadt 1
96190 Untermerzbach
Tel.: +49 / 9533 / 924-0
Fax: +49 / 9533 / 924-300
www.rosler.com

Specs.:

2005-07-11

Picture >>>

Sand Mixer

Built in

Manufacturer:

FTL (Foundry & Technical Liaison Ltd)

inquiry to:

Throughput:

Nicolas L. Epiphaniou
Epiphaniou Scrap MetalsLtd
Office Tel: +357 22 793390
Fax: +357 22 431534
Mobile: +357 99 419777
www.epiphaniouscrap.com
scrap@epiphaniou.com 

Specs.:

2005-04-01

Induction furnace plant
NFTGe 2000

Built in

1980

Manufacturer:

JUNKER

inquiry to:

Capacity:

2 to, 600 kW

OTTO-JUNKER GmbH
Jürgen Rollesbroich
Tel.: +49 (2473) 601 498
Fax: +49 (2473) 601 615
roh@otto-junker.de

Specs.:

with switchgear, operator-cubicle, capacitor unit, high-voltage
transformer (20 kW), water-cooling system with cooling tower
furnace-coil and body was tested and revamped-until disassembly well running