Elkem’s LAMET® Nodulizer and TOPSEED™ Cover Alloy
For a Delayed, Quieter Reaction that Leads to:
- Less Spillage, Fume, and Slag
- Higher Magnesium Recoveries
- Consistent Nodular-Graphite Structure
- Improved Quality at Lower Costs
As shown, Elkem’s LAMET® nodulizer and TOPSEED™ cover alloy gives a much
quieter reaction with less spillage, fume, and slag. In addition, Elkem’s metallurgically trained sales representatives can help design process adjustments that increase magnesium recoveries and lower costs compared to conventional-treatment practices. These adjustments reduce temperature losses, allow faster ﬁlling, delay the release of magnesium, signiﬁcantly improve magnesium recoveries, and give desired ductile-iron microstructures.
Visit our booth at CastExpo to see the full video comparing the two practices. Then talk to an Elkem Foundry Products representative about redesigning your ductile-iron treatment practice to maximize the beneﬁts available from using Elkem’s LAMET® nodulizer and TOPSEED™ cover alloy.
“Lamet” and “Topseed” are Elkem trademarks.
Ductile-iron foundries can efficiently treat, inoculate, and pour iron from the same ladle using Elkem’s LAMET® nodulizer and TOPSEED™ cover alloy. This combination gives a much quieter reaction (shown in the second photo) with less spillage, fume, and slag. It also delays the release of magnesium, increasing magnesium recoveries and lowering costs.
Visit Our Booth #1664 at CASTEXPO!
Doug White & Chris Lisso
|In the U.S.A.|
Elkem Materials Inc.
P.O. Box 266
Pittsburgh, PA 15230
Elkem Metal Canada Inc.
1685 Main Street West
Hamilton, Ontario L8S 1G5