B2B Portal for Technical and Commercial Foundry Management
Languages
Foundry Corporate News - Topic Continuous casting

*PUBLIC AUCTION*

Algoods Inc. / Tower Automotive

164 Sterling Rd., Toronto, Ontario, Canada M6R 2B8

Integrated Aluminum Mini-Mill with Hazelett Caster & Rolling Mills

Product Line:

    • Aluminum coils
    • Cut-to-length flexible conductor
    • Heat shields
    • Bus bar conductor
    • Rollbond evaporators
    • Starfin evaporators
    • Impact extrusion slug blanking lines

Partial list of equipment available:

  • Continuous Casting - Hazelett 14-1 twin belt continuous thin strip casting machine

HAZELETT
(Completely Refurbished in 2000) twin belt continuous thin strip; with 26” maximum width strip cast, 3.0” maximum strip thickness, 5/8” minimum strip thickness, 15 fpm maximum output speed AT 26” X ¾”, 45ton/shift slug material runs at 12” width, supplied by two NORTH AMERICAN gas fired, 700 Deg. C, 17 ton capacity aluminum melting furnaces, melt time 2.5 hours, operating w/ EPIC ll controller, 6 launder tubes with refractory. From here strip goes into STANAT-MANN 2 high hot mill.


  • (5) Furnaces including: CANEFCO gas fired roller hearth aluminum annealing furnace

CANEFCO
C6023 F1 gas fired roller hearth aluminum annealing furnace; with 600ºC maximum temperature, maximum output 4000lbs./hr., 8' X 3' opening, approx. 44' long, ALLEN BRADLEY PANELVIEW 1400e PLC control

  • (5) Rolling Mills including: STANAT-MANN 17" x 26" 2-Hi one way hot rolling mill (takes material directly from Hazelett caster) and UNITED 14" x 32" x 42" 4-Hi one-way cold rolling mill and others

STANAT-MANN
17 x 26 2 high one way hot rolling mill; with 17” roll diameter, 26” roll face, roller bearings, motorized screw-downs, 26” maximum strip width, 2.1” maximum input thickness, 60% maximum reduction, 27 FPM maximum rolling speed@ 60% reduction, entry edge guides, water soluble coolant, 250 HP main mill motor, hydraulic flying crop shear, 100 HP recoiler with hydraulic push-off, single arm turnstile, hydraulic guide to assist placing strip into mandrel slot, gauge, slab catcher used for thicker strip widths in place of mandrel


 

  • Slitting Lines - 24" and 40" slitting lines
  • Cut-to-length lines - 40" and 52" cut-to-length lines
  • (30) Presses including: BROWN BOGGS SS2 300 SSDC press, MINSTER SE2 250 108-48 SSDC Eccentric press, MACRODYNE 2001 MPZ 400 SS Hydraulic press, and more.

BROWN BOGGS

1997 SS2 300 straight side double crank press with 300 ton capacity, 60" X 40" bed, 2" stroke, 20" shut height, 10" adjustment, 0-250 SPM, 36" windows, automatic lubrication, light guards, PRESSMASTER PM1.5 PLC control



AND MUCH MORE!!

Öffnet einen externen Link in einem neuen Fenster
Click on the brochure link to view the equipment that is available.


Become a Corporate Assets Member!

Join our membership program to receive exclusive benefits.

For further information, please contact us at:

Tel: (416) 962-9600    Fax: (416) 962-9601

Email: Öffnet ein Fenster zum Versenden einer E-Mailinfo(at)corpassets.com


 

Youtube Linkedin Xing