B2B Portal for Technical and Commercial Foundry Management

Foundry Daily News

29. Oktober 2013

CN - Important using of vacuum casting in manufacturing industry

Vacuum mold casting, also known in the casting manufacturer as the V process, employs a sand mold that contains no moisture or binders. The internal cavity of the mold holds the shape of the aluminum castings due to forces exerted by the pressure of a vacuum. Vacuum molding is a casting process that was developed in Japan around 1970.

The Process

A special pattern is used for the vacuum mold casting process. It is either a match-plate or a cope and drag pattern with tiny holes to enable a vacuum suction. A thin plastic sheet is placed over the casting pattern and the vacuum pressure is turned on, causing the sheet to adhere to the surface of the pattern.

A special flask is used for this manufacturing process. The flask has holes to utilize vacuum pressure. This flask is placed over the casting pattern and filled with sand.

A pouring cup and sprue are cut into the mold for the pouring of the steel casting manufacturers.

Next, another thin plastic sheet is placed over the top of the mold. The vacuum pressure acting through the flask is turned on, and the plastic film adheres to the top of the mold.

In the next stage of vacuum mold casting manufacture, the vacuum on the special casting pattern is turned off and the pattern is removed. The vacuum pressure from the flask is still on. This causes the plastic film on the top to adhere to the top and the plastic film formerly on the pattern to adhere to the bottom. The film on the bottom is now holding the impression of the casting in the sand with the force of the vacuum suction.

The drag portion of the mold is manufactured in the same fashion. The two halves are then assembled for the pouring of the casting. Note that there are now 4 plastic films in use. One on each half of the internal casting cavity and one on each of the outer surfaces of the cope and drag.

During the pouring of the investment casting, the molten metal easily burns away the plastic.

investment casting products: www.ftm-china.com/product/investment-castings.html

About Fotai Machinery
Founded in 1989, Henan Fotai Machinery Co., Ltd. is a large-sized joint-stock company integrated with casting and machinery processing. Our company is located in the famous casting and machinery manufacturing city-Zhengzhou, China. After decades of pioneering efforts and technological innovation, our company has quickly grown to be the main production and export base of the casting and machinery industry in China.

Sourece: prsync.com

Related Articles

Youtube Linkedin Xing