B2B Portal for Technical and Commercial Foundry Management
Languages

+ a b c d e f g h i j k l m n o p q r s t u v w x y z

F+M Engineering (Foundry & Metallurgy Engineering SA)

Via Industria 79, 6987 Caslano, TI, Switzerland

Kontakt

Via Industria 79
6987 Caslano, TI
Switzerland

Telefon +41 (0)91 611 2040
E-Mail info(at)foundryengineering.ch

Information


The specialized technical knowledge in the No-bake foundry sector and its production capacity make the F+M group a world leader, with installations and plants realised worldwide.

The staff located, in particular in Switzerland (FME) and in the Czech Republic (FMM) has decades of experience in mechanical and electrical design of foundry machines and plants and the manufacturing standards, place our products at a high-quality and innovative level.

The technical solutions we offer to our customers, allow us to create efficient foundries, with reduced production costs, reduced environmental impact thanks to its solutions in terms of raw material consumption and sand reclamation, in full compliance with the strictest regulations in terms of security for the workforce.

Our area of interest begins in supporting our customers with dedicated engineering studies, specific to the needs of the foundry, both from the technical point of view (choice of the process, definition of layout and sizing of the plant) and the economic point of view (feasibility study , investment budget and economic return).

Our technicians are able to design and engineer any type of No-bake foundry, from the simplest to the most automated ones that use vertical warehouses for large casting, up to the inclusion of 3-level software that communicates with the customer's ERPs.

The production capacity developed by the plant located in the Czech Republic, with its covered surface of 30,000 m2, can realize complete plants and test all the equipment before shipment.

The factory has personnel for material preparation, cutting, welding and is equipped with an area dedicated to mechanical processing with updated machines in size and productivity.

For over 20 years the factory has built the largest plants ever realised in the No-bake and in the metallurgical sectors.

The after-sales service in Switzerland for technical assistance and support with spare parts to the plants, completes the panorama of activities developed by a dynamic and efficient group, always ready to support customers around the world.

Through the brand Bicor the group is able to build and service core-shooting machines.

The Czech and Swiss companies are completed by a branch in Bangalore - India, and an office in Italy. 

 

Molding line sold to Belarus.

Mobile mixer sold to Spain

Detail of proprietary software

 

 

 

 

 

 

 

 

 

 

FANUC Robotics Deutschland GmbH

Bernhäuser Straße 36 , 73765 Neuhausen a. d. F., Germany

Kontakt

Bernhäuser Straße 36
73765 Neuhausen a. d. F.
Germany

Telefon +49 7158 9873 - 0
Fax +49 7158 9873 - 100
E-Mail sales(at)fanucrobotics.de

Pressemitteilungen & News

JP - Fanuc to build new plant to harness 5G and self-driving demand
Robot maker to invest $28m to mass-produce equipment for high-end lenses
General Motors Honors FANUC as Inaugural Winner of Coveted Supplier Innovation Award
FANUC was named a GM Innovation Award winner during General Motors 24th annual S...

FARINA MARCO S.r.l.

Via dell’Artigianato, 26, 22063 Cantù (CO), ITALY

Kontakt

Via dell’Artigianato, 26
22063 Cantù (CO)
ITALY

Telefon +39 031 734890
Fax +39 031 735684
E-Mail info(at)farinamarco.com

Information

Farina Marco S.r.l.  is an Italian qualified O.E.M. skilled in design, construction and maintenance of high-tech TRIMMING TOOLS and equipment to finishing aluminium and magnesium casting. The trimming tools can be integrated with saw cutting, drilling and threading systems. which has no limits in complexity and size (max  size 2300 x 1300 x 1500 ; Kg 5000). The main sectors of application are: automotive, furnishing, electromechanical, electric-household, gardening and textile.

Farina Marco S.r.l.  company was established in 1974 and has continuously developed and increased its know-how. The company specialises in trimming tools construction which are made to the customers’ specifications including an entire in-house design and engineering department working with CAD 3D programs Farina Marco exhibits its product in the most important international trade fairs Euroguss ; Gifa and also Metef  

Farina Marco S.r.l. is fully involved in the international market who takes more than 70 % of the turnover, taking advantage of the necessary organization to offer goods and services at best relationship quality/price with high degree of responsiveness. A dedicated customer service has always been one of our top priorities. We usually sell in Germany, the Scandinavian market, UK, Poland, Spain, Portugal, Slovenia , Austria . Farina Marco S.r.l. works also with the new markets such as Turkey , Brazil and Russia.

Products and Services


Farina Marco S.r.l. is one of the top expert producers for trimming tool in Europe and business is focused in stamping and trimming tools for aluminium and magnesium.

It can produce tools for all sizes of high pressure casted parts from a few grams components up to a very heavy castings of up to 20 kgs, as parts produced from die casting cells are from 300 up to 4000 ton.

We produce tools for all sectors: Automotive, industrial components, gardening, lighting.

We have special experience in the production tool for automotive components in aluminium and magnesium. In the latest years, a part of production also moved into the construction of trimming tools for big structural components like shock towers and boxes for electrical batteries for hybrid and electrical vehicles. Farina Marco S.r.l. also usually manages with Magnesium components such as instruments panel, boxes, etc

The tools are state of the art and it is standard to apply hydraulic cylinders, double trimming effect and several drilling or tapping units. It is also standard to use sawing systems to cut big gating channels and we have extensive experience in this.

Our complete production is done internally, and the tool is designed to all clients specifications. Machining and assembly is done inside of the facility, as this keeps the process under control and to be on time with the deliveries.

All the tools are shipped ready to use and tested and adapted to hot parts as in serial production, provided with all the electrical and Hydraulical connections.

  • FARINA MARCO S.r.l.
  • FARINA MARCO S.r.l.
  • FARINA MARCO S.r.l.
  • FARINA MARCO S.r.l.

FARO Europe GmbH & Co. KG

Lingwiesenstr. 11/2, 70825 Korntal-Münchingen, Germany

Kontakt

Lingwiesenstr. 11/2
70825 Korntal-Münchingen
Germany

Telefon +49 7150 9797-0
Fax +49 7150 9797 44

FATA Aluminum LLC.

2333 E. Walton Blvd., MI 48326 Auburn Hills, United States

Kontakt

2333 E. Walton Blvd.
MI 48326 Auburn Hills
United States

Telefon +12487247669
Fax +1248-659-1526
E-Mail info(at)fataaluminum.com

Pressemitteilungen & News

Foundry of the Future: Five questions for Marco Meneguzzo, the new General Manager at FATA Aluminum
Seven months after Marco Meneguzzo was chosen to lead FATA Group, he was given f...
FATA AUTOMATION AND FATA ALUMINUM CONTINUE TO GROW IN CONTINENTAL NORTH AMERICA
FATA Automation and FATA Aluminum have opened a new production facility in Aubur...
FATA ALUMINUM IS OPENING A SALES OFFICE IN FRANCE
As of April 2017, Fata Aluminum will open a sales and customer assistance office...

Information

FATA Aluminum

World Headquarter: Auburn Hills, Michigan, U.S.A.

Among our customers, FATA Aluminum has 60 years of history of providing service to General Motors, Mercedes-Benz, Daimler Chrysler, Teksid, Nemak, and Volks Wagen.

FATA Aluminum has a strong background in foundry automation and process control. Serving the modern industry means exceeding customers expectations a constant attention is paid to each product from design to manufacturing, from commissioning to after sale service. FATA Aluminum is the number one leader in developing and manufacturing the pistons machinery.

The core business of FATA Aluminum is providing customers with aluminum gravity castings, sand regeneration plants, lost foam plants, core making machines, piston plants, and foundry tooling. FATA Aluminum is a global company that can also be located in Mexico, Italy, and China. Focused on improving the customer total value, with its strong industrial approach FATA Aluminum is moving forward to the global market, ready to take advantage of new opportunities.

Inhouse Contact
Giorgio Donini - gdonini(at)fataaluminum.com
Martin Mattia - mmattia(at)fatainc.com

FCRI & Jin Gang Group

No. 18, Liuyuan Road, Shiwan, 528031 Foshan, China

Kontakt

No. 18, Liuyuan Road, Shiwan
528031 Foshan
China

FerroPem

517 Avenue de la Boisse, 73000 Chambery, France

Kontakt

517 Avenue de la Boisse
73000 Chambery
France

Fill Gesellschaft mbH

Fillstraße 1, 4942 Gurten, Austria

Kontakt

Fillstraße 1
4942 Gurten
Austria

Telefon +43 (0)7757/7010-0
Fax +43 (0)7757/7010-275
E-Mail info(at)fill.co.at

Pressemitteilungen & News

Fill Machine Engineering invests another 7.5 million euros in its Gurten plant
Innviertel-based high-tech company continues on its course of expansion. 5,000 s...
Spectacular performance promotes efficient production
Lower energy consumption – higher productivity: New syncromill machining cente...
Österreichische Spitzentechnologie punktet mit Präzision und Wirtschaftlichkeit
Namhafte Automobilhersteller setzen auf die Technologie von Fill Maschinenbau. D...

Information

Company Profile

neubau.jpg

Wer die beste Lösung sucht, entwickelt gemeinsam mit Fill seine Zukunft.

Dieser Anspruch wird seit 1966 gelebt. Dadurch entwickelte sich Fill im Laufe der Jahre zu einem der weltweit führenden Maschinen- und Anlagenbauer.

"Synergien aus den verschiedenen Produktionszweigen zu erkennen und sinnvoll zu nutzen, darin liegt unsere Stärke."
Andreas Fill


Products


alu_beta.jpg


zerspanung_4.jpg

kunststoff_beta.jpg

Das Steuer fest im Griff. Auf Überholkurs mit Verantwortung. Hohe Ansprüche in der Kunststoffverarbeitung fordern Lösungen von Fill. Mit Fill als Partner heißt das weltweite Spitzentechnologie für Premiumqualität.


_skisnow_5_kopie.jpg

Fill komponiert die international besten Produktionslösungen für die Be- und Verarbeitung von Compositeteilen.
Von der Faser bis zum fertigen Bauteil - Alles aus einer Hand.


holz_beta.jpg

Den Produktionsalltag immer vor Augen liefert Fill Maschinen und Anlagen, die auf rationelle Weise Produktivität und Qualität des Produktionsprozesses erhöhen.


sondermaschinen_6.jpg

Dort wo Standardmaschinen an ihre Grenzen stoßen. Wo die hohen Ansprüche des Kunden nur durch individuelle Lösungen erfüllt werden können. Dort ist Fill zu Hause - weltweit.


service.jpg

KOMPETENT, FLEXIBEL, SCHNELL
Das Team des Kompetenz Centers Service schafft gemeinsam mit Ihnen die besten Lösungen zur nachhaltigen Nutzung von Anlagen und Maschinen.


Das Leistungsangebot umfasst:
UNTERSTÜTZUNG // WARTUNG // REPARATUREN // ANLAGENMODIFIKATIONEN // ERSATZTEILE // PROZESSOPTIMIERUNG


Categories

  • Casting and diecasting machines
  • Discharging, decoring, cleaning and finishing
  • Measuring and testing technology, quality control, laboratory equipment
 

Finite Solutions Inc

4769 Highland Park Dr , 53086-9441 Slinger, WI , United States

Kontakt

4769 Highland Park Dr
53086-9441 Slinger, WI
United States

Fochem International (Pty) Ltd.

P O Box 11610, 1457 Randhard , South Africa

Kontakt

P O Box 11610
1457 Randhard
South Africa

Telefon 011 903 9720
Fax 011 903 9730
E-Mail info(at)fochem-international.com

Pressemitteilungen & News

GIFA Report Fochem International
Fochem International would like to thank all our visitors who came to see us at ...
Fochem International – Your Chemical Expert!
Fochem International offers application-specific products for many different p...
FOCHEM INTERNATIONAL YOUR CHEMICAL EXPERT
Fochem International offers application-specific products for many different pro...

Information

About us

Fochem International has its roots in Germany and has built its foundation on German Technology.

During the early 1970’s the first South African air-micronization plant for the manufacture of colloidal graphite was established south of Johannesburg. This enabled South Africa’s automotive- and defence industry to become independent of international supplies.

Since then, thousands of tons of specialized lubricants have been produced annually for the local market, as well as for global exports.

Today Fochem International is proud of having one of the most advanced technologically and environmentally production facilities of its kinds in the world. Certain production stations are fully automatic and are operated free of human supervision. Our manufacturing process guarantees a consistently high quality end product.

Our unique technical capability, extensive experience in product development, growing reputation for reliability and highly competitive pricing, sets us apart as a preferred supplier on an international level.

It is our obligation and strength to be innovative in helping our customers to solve their particular technical problems. We constantly develop new technologies and optimize our production processes.

Based on this flexibility we can offer a large variety of specialized products.


Products

Our products are manufactured from very basic raw materials as well as high-tech products in our processing plant, whilst our competitors just mix together semi-finished products.
We are able to offer our customers tailor-made products. Try us, you will be pleasantly surprised!


Range of Products:

  • High pressure die-casting lubricants and release agents
  • Coatings for gravity and low pressure die-casting
  • Forging compounds
  • Extrusion compounds
  • Micronized graphites
  • Coatings for primary refineries, electronics industry,  
      high tension cables and many other industries
  • Specialized tribo-chemical products

 

Die-Casting

Water-Based Products

Product

Casting

Properties

Isolat-TT 77 (10)

Isolat-TT 77 (20)

Isolat-TT 77 (40)

Aluminium

Magnesium

Zinc

This product does not contain wax or silicone. Therefore no build-up in cavities or on die-frame, vents remain clean, excellent release, surfaces free from flow- marks.

Isolat-SX (20)

Isolat-SX (40)

Aluminium

Release agent for extremely thick-walled and cracked forms.

Isolat-WL (20)

Isolat-WL (40)

Aluminium

Magnesium

Zinc

Special release agent with instant film forming ability;
exceptionally good die release;
very economical product.

Isolat-2020 (20)

Isolat-2020 (40)

Aluminium

pure siloxane release agent (does not contain wax)

Extremely shiny surfaces, no build-up, clean vents and die-frame are obtained.

Graphitex-37

Aluminium

Grraphite-based, "dry" release agent for SSM;

Gas porosity emanating from die release agent is eliminated.

Graphitex-122

Copper

Colloidal graphite-based product.



Oil-Based Products

The products Isolat-N and Isolat-NG are being used alone used or in conjunction with water-based release agent in automatic multiple-stage spray systems.
This improves the tool life by reducing the chilling effect of the water. Oil-based products are generally preferred on very hot dies.

Product

Casting Alloy

Composition

Isolat-N

Aluminium

Clear oil with additives

Isolat-NG

Aluminium

Oil containing colloidal graphite and other pigments

Special Solvent No.1

Zinc

runny oil out of the gasification

Isolat-ZN 90

Zinc

Clear, very thin oil (synthetic)

Isolat-MG 109

Magnesium

Zinc

Synthetic oil with soild (white) lubricants



Products in Paste form

Product

Casting Alloy

Composition

Isolat-TM 201

Aluminium

Magnesium

Aluminium pigmented grease with ceramic bonding agent

Isolat-P 22

Zinc

Aluminium

Magnesium

Transparent - white paste

Trewa Anti-soldering grease

Aluminium

Magnesium

Anti-welding grease to form "patins" on
new dies.



Plunger Lubricants

Oil-Based Products

Product

Type

Appearance

Application

Isolat-108 SP

thin graphite oil

black

Spray

Isolat-208 SP

thick graphite oil

black

drip

Isolat-318 SP

graphite grease

black

manual

Isolat-128 PP

light ester oil

clear

spray

Isolat-218 MP

heavy mineral oil

clear

drip

Isolat-228 PP

heavy ester oil

clear

drip

Isolat-TM 201

aluminium grease

aluminium colour

manual



Beads

Our beads consist of high melting point waxes which are non-tacky, odorless and do not form any carbon built up inside of the shot sleeve. They are anti-static, free-flowing and can be used in any type of dispensers.


Soild Plunger- and Sleeve lubricant


Product

Type

Available sizes

Appearance

Shape

Isolat 80 G

graphite wax

(graphite content 15%)

fine dust

0.3 - 0.5 mm

0.5 - 1.0 mm

1.0 - 1.6 mm

1.6 - 2.0 mm

black

spherically round

Isolat 80 G

graphite wax

(graphite content 15%)

2.0 - 3.0 mm

black

non-spherically round

Isolat 80 WS

white wax

fine dust

0.3 - 0.5 mm

0.5 - 1.0 mm

1.0 - 1.6 mm

1.6 - 2.0 mm

white

spherically round



Speciality Products

Product

Type

Appearance

Field of Application

Isolat-CU Paste

Copper-PTFE-paste

copper

Injector lubrication,
Assembly lubricant

Isolat-MBO

lubricating grease

grey

All moving parts of die-casting machine

Minex-Impra M-07

white

white

Refractory die-coating

Supra Coate-Paste

paste

white

Ladle coating

Supra Coat-aqueous

aqueous liquid

white liquid

Ladle coating

Supra Coate-Powder

Powder

white beads

Ladle coating

Antibact

liquid

brown

Protection of aqueous systems agianst bacteria

Marine-Grease

grease

yellow

Corrosion protection grease (die assembly)

Rexal-W 71

oily liquid

brown

Rust protection agent



Forging

Water-Based Products


Product

Forged
Metal

Properties

Graphitex CR-33

Steel

Copper

General purpose graphite-based forging compound containing smelt-glasses and explusion agents.


Application
All forgings including crankshafts.

Graphitex 119

Steel

Similar to Graphitex CR33, only in more concentrated form and with more powerful expulsion agents.


Application
Speciality product for deep cavity and intricate forgings e.g. twisted crankshafts with counterweights.

Graphitex CR-7

Steel

Copper

Aluminium

Titanium

Ready for use forging compound based on sub-micron colloidal graphite does not settle out.


Recommended Applications
High precision forgings, demanding exceptionally accurate surface finish and maximum extended service life of forging die, e.g. gear forgings, titanium turbine blades, and medical components.

Graphitex 195

Steel

Copper

Forging compound based on macro-colloidal graphite; very economical product.

Minex 234

Steel

Copper
Aluminium

Titanium

Special Alloys

Odorless liquid which is free from graphite and other pigments. This product is able to substitute, with some exceptions, graphite-based products.


Application
All closed die forgings on ammers and presses of low to medium complexity. Highly accurate forgings can be produced.

Minex 179

Aluminium

Titanium

White, aqueous forging compound.



Oil-Based Products

Product

Forged
Metal

Properties

Rexal S 99

Steel

Copper

Viscous oil laded with high purity graphite of colloidal fineness, general-purpose product.

Rexal S 110

Steel

Aluminium

Copper

Thin dipersion of colloidal graphite in low viscosity mineral oil.

Application by spray.

Rexal Hi-Ex

Steel

Semi liquid product heavily loaded with graphite and exlosion agents.


Application
Bottling operation of production of hollow forgings.

 

Powder Products

Product

Forged
Metal

Properties

Graphine Powder „B"

Steel

Copper

Black powder incorporating explosion agents and smelt glass.


Application
Lubricating compound for the manufacture of hollow forgings of alloy steels.

Graphine Powder „LSB"

Steel

Aluminium

Surface hardening- and lubricating compound for special bottling- and extrusion operations of high alloy steels;

also suitable for aluminium forgings.



Extrusion

Coatings for the production of
pipes and profiles out of non-iron metals

Product

Description

Application

to be
applied as

Metal

Isolat 318 SP

Highly concentrated
Graphite Paste
(manual)

Extrusion of hollow profiles

Profile-Extrusion

Mould

Extrustion lubricant


Coating for pressing plate

Coating of the mould

Aluminium

Copper

Brass

Isolat 108 SP

Thin
Graphite oil
(sprayable)

Hollow Profile

Extrusion

Profile Extrusion
Mould

Extrusion lubricant

Coating for pressing plate

Coating df the mould

Aluminium

Copper

Brass

Rexal SP Paste

Soft
Graphite wax
(manual)

Profile Extrusion

Coating for
pressing plate

Aluminium

Rexal A 20

Graphite dispersion
in Ethylalcohol
(sprayable)

Profile Extrusion

Coating of raw metal

Aluminium

Graphitex 111

Graphite dispersion
in water
(sprayable)

Mould

Coating of the mould

Aluminium

Copper

Brass

Rexal RL 610

viscous
Paraffin polymer with polar additives

Pipe Extrusion
(raw Extrusion)

Lubrication of the
wire frame and plug:
use for thick parts
and low extrusion
speed.

Copper

Brass

Rexal TR 42

thick
Synthetic Oil
(ash free)

Pipe Extrusion
(Medium- and Fine Extrusion)

Lubrication of the wire frame and plug at high extrusion speed:
The product will vaporize with the final annealing without any remains.

Copper

Brass

Rexal TR 42-EP

thick
Synthetic Oil with EP- additives
(ash free)

Pipe Extrusion
(Medium- and Fine Extrusion)

Wire Extrusion

Lubrication of the wire frame and plug at high extrusion speed:
Rexal TR 42-EP prohibits the welding of the extrusion tools with the aluminium wire.

Aluminium

 




  • suitable for all sizes and shapes of beads
  • the quantity of beads can simply be changed by the
      push of a button
  • the unit is small, light-weight, and of a smart design
  • extremely reliable: the unit has been tested on
      10 million applications

     

     

FONDERMAT do BRASIL

Alameda Mercúrio, 164, Distrito Industrial, 13.347-662 Indaiatuba - SP, Brazil

Kontakt

Alameda Mercúrio, 164, Distrito Industrial
13.347-662 Indaiatuba - SP
Brazil

Force Motors LTD

Afghanistan

Kontakt



Afghanistan

Pressemitteilungen & News

Force Motors - SIX NEXT GEN SMART MOBILITY SOLUTIONS ON THE FORCE TRAVELLER
21 seater Traveller Smart Citibus15 seater Super luxury Traveller Royale and 9...

Foseco Foundry Division / Vesuvius GmbH

Gelsenkirchener Straße 10, 46325 Borken, Germany

Kontakt

Gelsenkirchener Straße 10
46325 Borken
Germany

Telefon 02861 83-0
Fax 02861 83-338
E-Mail info.germany(at)foseco.com

Vertretungen weltweit

Foseco Foundry Division, Foseco Española S.A.
Barrio Elizalde 5
48213 Izurza (Bizkaia)
Spain
Phone: +34 (0) 946 202 500
Fax: +34 (0) 946 203 773
Foseco Foundry Division, Foseco Foundry (China) Co Ltd.
806-807 Innov Tower, Block A, No. 1801, Hongmei Road, Xuhui District
200233 Shanghai
China
Phone: +86 (0) 21 3367 8188
Fax: +86 (0) 21 3367 8188
Foseco Foundry Division, Foseco Golden Gate Company Ltd.
No. 6, Kung Yeh 2nd Road, Ping Tung Industrial District
90049 R.O.C
Taiwan
Phone: +886 (0) 872 281 08
Fax: +886 (0) 872 281 82
Foseco Foundry Division, Foseco India Limited
Gat No. 922/923, Sanaswadi, Taluka Shirur
412 208 Dist.-Pune
Maharashtra-India
Phone: +91 (0) 2137 668 100
Fax: +91 (0) 2137 668 160
Foseco Foundry Division, Foseco Industrial e Comercial Ltda. Brasil
Via Raposo Tavares, Km 15
05577-100 Sao Paulo
Brazil
Phone: +55 (0) 11- 3719-9788
Fax: +55 (0) 11- 3731-0240
Foseco Foundry Division, Foseco International Limited, Middle East Office
Vesuvius Emirates FZE Warehouse No. 1J-09/3 P O Box 49261 Hamriyah Free Zone
Sharjah
United Arab Emirates
Phone: +971 (6) 526 237 0
Foseco Foundry Division, Foseco Japan Limited
Orix Kobe Sannomiya Bldg. 6-1-10, Gokodori, Chuo-Ku
651-0087 Kobe
Japan
Phone: +81 (0) 78 252 2231
Fax: +81 (0) 78 252 2261
Foseco Foundry Division, Foseco Korea Limited
235 Dodang-dong Wonmi-gu, Bucheon City
420-807 Gyeonggi-do
Republic of Korea
Phone: +82 (0) 32 675 3211
Fax: +82 (0) 32 675 7512
Foseco Foundry Division, Foseco Nederland B.V.
Binnenhavenstraat 20
7553 GJ Hengelo
Netherlands
Phone: +31 (0) 742 492 100
Fax: +31 (0) 742 424 125
Foseco Foundry Division, Foseco Portugal Produtos Para Fundicâo LDA.
Edificio Leixôes 3° Andar Terminal do Freixieiro E.N. 107 Apartado 5101
4456-901 Perafita
Portugal
Phone: +351 (0) 229 999 530
Fax: +351 (0) 229 999 539
Foseco Foundry Division, Foseco Pty Limited Australia
No 7, Stuart St.
NSW 2211 Padstow
Australia
Phone: +61 (2) 99 145 500
Fax: +61 (2) 99 145 547
Foseco Foundry Division, Foseco Russia
Kooperativnaya Str. 10
140180 Zhukovsky, Moscow Region
Russia
Phone: +7 (0) 495 221 2511, + (0) 495 221 2512
Fax: +7 (0) 495 787 6114
Foseco Foundry Division, Foseco SAS France
Le Newton C, 7 Mail Barthélémy Thimonnier Lognes
77437 Marne La Vallée, Cedex 02
France
Phone: +33 (1) 64 735 555
Fax: +33 (1) 64 735 556
Foseco Foundry Division, Foseco Thailand Limited
22nd Floor, Ocean Tower 1, 170/69 Rachadapisek Road, Klongtoey
10110 Bangkok
Thailand
Phone: +66 (0) 2 261 3164 67
Fax: +66 (0) 2 261 3168
Foseco Foundry Division, South Africa (Pty) Limited
12 Bosworth Street, Alrode
1450 Gauteng
South Africa
Phone: +27 (0) 119 039 500
Fax: +27 (0) 119 082 380
Foseco Foundry Division, Vesuvius Inc. Cleveland Foundry
20200 Sheldon Road
44142 Cleveland, Ohio
USA
Phone: +1 (0) 4 408 264 548
Fax: +1 (0) 4 402 437 658
Foseco Foundry Division, Vesuvius Istanbul Sanayi ve Ticaret A.S.
Gebze Organize Sanayi Bolgesi 27 Mah. 1000. Cadde 12.Sok No:1022
41480 Gebze Kocaeli
Turkey
Phone: +90 (0) 262 677 10 50
Fax: +90 (0) 262 677 10 60
Foseco Foundry Division, Vesuvius Italia S.p.A.
Via Ravello, 5/7, Quartiere Ravello
20080 Vermezzo (MI)
Italy
Phone: +39 (02) 949 819 1
Fax: +39 (02) 949 430 20
Foseco Foundry Division, Vesuvius Malaysia And Bhd
Lot PT 11693 (Block B) Jalan Pelabuhan Utara, Kawasan Industri Bandar Sultan Suleiman
42000 Pelabuhan Klang, Selangor D.E.
Malaysia
Phone: +603 3176 0508 ext 13, 14, 15, 16, 12
Fax: +603 3176 0608
Foseco Foundry Division, Vesuvius Mexico-Monterrey, Foseco Sa de Cv
Lucio Blanco 232, 10 de Mayo Guadalupe, Nuevo León
67130 Guadelupe
Mexico
Phone: +52 (81) 83 79 6513
Fax: +52 (81) 83 34 3559
Foseco Foundry Division, Vesuvius PT Foseco Indonesia
Jalan Rawagelam II, No. 5, Kawasan Industri, Pulogadung
13930 Jakarta Timur
Indonesia
Phone: +62 (0) 214 605 555
Fax: +62 (0) 214 603 489
Foseco Foundry Division, Vesuvius Scandinavia AB
Förradsgatan 4
662 34 Amal
Sweden
Phone: +46 (0) 532 607 730
Fax: +46 (0) 532 607 749
Foseco Foundry Division, Vesuvius Slavia A. S.
Lešetínská 47
CZ-71900 Ostrava-Kunčice
Czech Republic
Phone: +42 (0) 595 221 412
Fax: +42 (0) 595 221 417
Foseco Foundry Division, Vesuvius UK Ltd.
Tamworth
B78 3TF Staffs
United Kingdom
Phone: +44 (0) 182 728 999 9
Fax: +44 (0) 182 725 080 6
Foseko Foundry Division, Vesuvius Polska Sp z o.o.
ul. Leonarda Da Vinci 5
44-109 Gliwice, Slaskie
Poland
Phone: +48 (0) 323 303 530
Fax: +48 (0) 323 303 535

Pressemitteilungen & News

Foundry-Planet Interview: Patrick André Shares Latest News From GIFA
André, CEO of Vesuvius, talks about GIFA, Newest Technology and Reducing Greenh...
Gießerei-Industrie im Umbruch?
Da kommt die GIFA, METEC, Thermprozess und Newcast im Juni 2019 gerade recht!
Foundry industry in transition?
The GIFA, METEC, Thermprozess and Newcast in June 2019 are just right!

Information


Foseco – den Gießereien verpflichtet

Foseco ist ein weltweit führender Lieferant von Gießereihilfsmitteln und Lösungen für die Gießereiindustrie. Unsere Lösungen und unsere fortschrittlichen Computer-Simulationsprogramme ermöglichen es Gießereien, Gussfehler wie Pinholes, Lunker, Einschlüsse, Schülpen, Penetration oder Blattrippen zu reduzieren. Daher verringern Foseco Produkte arbeitsintensives Putzen und Nachbearbeiten, erleichtern die Verarbeitung des Metalls, beeinflussen die Metallerstarrung und automatisieren den Form- und Gießprozess, wodurch sich wiederum Kosten, Energieverbrauch und die Größe der Form verringern.

Das umfangreiche Angebot an Gießereitechnik für Eisen-, Stahl- und Nichteisengießereien umfasst exotherme und isolierende Speisungssysteme, Filter für Eisen-, Stahl- und Aluminiumschmelze, das Direkteingussverfahren, Software zur Simulation des Erstarrungsverhaltens, Schmelzebehandlungen und Entgasungssysteme für Nichteisengießereien, Gießstrahlimpfung, moderne Schlichten für den Sandguss sowie Kokillenschlichten, umweltfreundliche Bindemittel, Auskleidungssysteme für Pfannen und Öfen sowie energiesparende Tiegel.

Produkte:

Foseco bietet ein umfangreiches Sortiment von Technologien, Anlagen und Verbrauchsgütern für die Gießereiindustrie.

  • Kalthärtende Furan-, Phenol-, Alkaliphenol- und  Polyurethan-Harzbindersysteme.
  • Polyurethan Cold-Box und CO2 Bindersysteme
  • CO2- und Ester härtende Natriumsilikatbindemittel
  • Trennmittel, Klebstoffe und Dichtungsmassen sowie Sandadditive
  • Schlichten für Sandformen- und Kerne
  • Kokillenschlichten
  • Schlichteaufbereitungsanlagen
  • Elektrostatische Schlichten
  • Schlichten für Vollformgießverfahren und Lost Foam Prozesse
  • Schlichten für Schleudergussrohre und Walzen
  • Metallurgische Schlichten
  • Direkteingusstechnik / Filterspeisertechnik
  • Exotherme Speiser
  • Exotherm-isolierende Speisereinsätze
  • Isolierende Speisereinsätze
  • Fflexible Glieder-Matten, Lunkerpulver, exotherme und isolierende Speiserabdeckplatten
  • Keramische Gießfilter in Schaumstruktur, Zirkonoxid- und Aluminiumoxid-Gießfilter
  • nichtkeramische Gießfilter für Aluminiumlegierungen
  • Bauteilen für Einguss- und Gießsysteme
  • Feuerfeste Auskleidungssysteme für Pfannen und Öfen
  • Vorgefertigte Formen für Aluminium und Zink
  • Tiegel aus SiC und Tongraphit, zum Schmelzen und Warmhalten
  • Stopfen und Ausgüsse
  • Impfmittel, Kugelgraphitbildner, Flussmittel und Schlackenbinder
  • INITEK Behandlungstechnologie für GJS und GJV
  • automatische Gießstrahlimpfsysteme und Kontrollsysteme für Gießstrahlimpfung
  • Entgasungs- und Schmelzebehandlungsanlagen
  • Produkte zum Abkrätzen, Abdecken und Reinigen von Aluminiumlegierungen
  • Kornfeiner und Veredelungsmittel Aluminiumlegierungen
  • Produkte zur Behandlung von Kupfer-, Magnesium- und Zinklegierungen

Darüber hinaus bietet Foseco ein erweitertes Produktportfolio für die Feingussindustrie

  • Einmal- und Backup-Tiegel
  • Filter mit feinerer Porosität sowie die gerahmten keramischen Schaumstrukturfilter auf Zirkonbasis
  • Lunkerpulver
  • Feuerfeste Auskleidungssysteme für Pfannen und Öfen
  • Modernste Entgasungs- und Schmelzebehandlungs-Technologien
  • Tiegel aus SiC und Tongraphit, zum Schmelzen und Warmhalten

Foundry Machinery & Spares Limited

Unit G & H, Fryers Close, Bloxwich,, WS3 2XQ Walsall, United Kingdom

Kontakt

Unit G & H, Fryers Close, Bloxwich,
WS3 2XQ Walsall
United Kingdom

Telefon + 44 (0) 1922 493603
Fax + 44 (0) 1922 713729
E-Mail info(at)fmslimited.co.uk

Information

Best known for its continuous mixer technology, UK-based Foundry Machinery & Spares Ltd specialises in the full 3D design, manufacture, installation and commissioning of No-Bake Foundry equipment. This successful family owned, and managed business currently enjoys the strongest order book ever as well as expanding sales opportunities throughout the world.

Tony Perkins has been developing equipment for the foundry industry since 1980, including the last 20 years with son, Craig. They Created Foundry Machinery & Spares Ltd (FMS) in 1999, a business that has grown exponentially in the intervening period, developing, manufacturing and selling an extensive range of No-Bake equipment for the chemically-bonded sand Foundries. The product range includes sand mixers, mould handling equipment including the  TRANSTEK Rapid mould making technology (boasting 25% faster speeds than comparable fast loop systems while achieving a 60% reduction in total foot print area), core making,  casting and cooling devices and reclamation equipment (mechanical and Thermal),  as well as chemical storage and distribution systems.

FMS has recently updated its digital brochure making it “more accessible and usable for our representatives and customers while being available for download on our updated website”, The digit brochure is a great tool, showcasing the high-quality range as well as previously completed projects. Spare parts are a highly important part of the business, especially as equipment is exported all over the world, “it is important to us to react and support our customers quickly and effectively, to accommodate this, we have substantially increased consignment stock allowing orders to be satisfied within a matter of days” says Dan Sullivan (Sales manager).Year on year the customer base grows, 2017 has been the highest to date both domestically and internationally. The volume of recommendations and repeat business generated are further positive signs of the company’s position in the no-bake equipment marketplace.

  • Foundry Machinery & Spares Limited
  • Foundry Machinery & Spares Limited
  • Foundry Machinery & Spares Limited

Produkte & Leistungen

“The last few years have witnessed a number of important changes to the sand mixing technology at many foundries, especially with respect to process control” Craig Perkins suggests. In particular, this has involved the increased adoption of greater chemical pumping accuracy with respect to dosing, temperature blending and box filling, as well as the accurate logging of moulding boxes etc.  

“Customers are investing increasingly in the latest technology to improve production efficiencies and calling upon FMS to assist with the realisation of these efforts.” In many instances, foundries approach the UK based supplier for solutions to specific materials handling issues, a design process which often results in the involvement of our 3D design team creating models to simulate the operating procedure and benefits of the proposed solution. In other cases, FMS has devised improvements to conventional sand handling procedures, based on long-term experience in the industry. “spending so much time on site, we have the opportunity to observe equipment in operation, which in turn stimulates the creation of process efficiency improvements and ideas for financial savings.” This has included temperature blending innovation which provides savings in chemicals, with short payback times.

FMS is constantly striving to improve and innovative with leading technology to its production portfolio be it via research and development or quality contacts. A more recent example of this would be the partnership between FMS and TRANSTEK, an experienced company who specialise in Mould handling, TRANSTEK came up with an innovative design for mould production with their RAPID.  The RAPID moulding line is a vertical pattern loop system. This brings the advantage of very small foot-print area. Furthermore, since the elevators can store 2 bolsters at the same time, the length of the system is reduced by the length of one station. The foot print area saving is up to 60% when compared to any horizontal loop system. RAPID vertical loop provides about 20-30 seconds faster cycle times than any conventional loop systems especially with short filling time systems, thanks to its continuous elevators. They operate in one direction only so that the precious return and eject-reload transfer times are saved.

FMS holds the worldwide rights to Transtek RAPID system, with a number of units working today and more in production, they know the RAPID technology will be the perfect solution for many Foundries requirements.


Turnkey Services 


The provision of turnkey projects is an increasingly important part of the FMS service, especially for those clients who prefer equipment to be fully designed, built, delivered, installed and commissioned as a complete package. In many instances this also includes for the provisions of an onsite support and training presence for the efficient use of the latest No-bake technology. This turnkey approach has been adopted in a number of recent projects, one that stands out is a full thermal reclamation plant for a very well-respected Aluminium Foundry in France. FMS were able to improve the design of their thermal reclamation unit adding many process benefits while delivery a 100% turnkey installation.


Foundry Service GmbH

Sonnenblumenallee 12 (near Grohe Forum), 58675 Hemer, Germany

Kontakt

Sonnenblumenallee 12 (near Grohe Forum)
58675 Hemer
Germany

Pressemitteilungen & News

Legionella - a serious topic for foundries?
Legionella outbreak in Warstein in 2013 was one of the causes for new legislatio...
Optimizing Production Facilities in Foundries
Foundry Service GmbH optimizes production facilities in foundries very efficient...
RSD 180 V – The New Benchmark in Drive Technology
In the past and present, volume sizes of 30,000 kg of liquid metal have been mov...

Furtenbach GmbH

Neunkirchner Str. 88, 2700 Wiener Neustadt, Germany

Kontakt

Neunkirchner Str. 88
2700 Wiener Neustadt
Germany

Youtube Linkedin Xing