B2B Portal for Technical and Commercial Foundry Management
+ a b c d e f g h i j k l m n o p q r s t u v w x y z

F+M Engineering (Foundry & Metallurgy Engineering SA)

Via Industria 79, 6987 Caslano, TI, Switzerland


Via Industria 79
6987 Caslano, TI

Telefon +41 (0)91 611 2040
E-Mail info(at)foundryengineering.ch

Pressemitteilungen & News

F+M Engineering partners with Foundry and Metallurgy Engineering SA
F+M Engineering is pleased to inform you that an important foreign investor...


The specialized technical knowledge in the No-bake foundry sector and its production capacity make the F+M group a world leader, with installations and plants realised worldwide.

The staff located, in particular in Switzerland (FME) and in the Czech Republic (FMM) has decades of experience in mechanical and electrical design of foundry machines and plants and the manufacturing standards, place our products at a high-quality and innovative level.

The technical solutions we offer to our customers, allow us to create efficient foundries, with reduced production costs, reduced environmental impact thanks to its solutions in terms of raw material consumption and sand reclamation, in full compliance with the strictest regulations in terms of security for the workforce.

Our area of interest begins in supporting our customers with dedicated engineering studies, specific to the needs of the foundry, both from the technical point of view (choice of the process, definition of layout and sizing of the plant) and the economic point of view (feasibility study , investment budget and economic return).

Our technicians are able to design and engineer any type of No-bake foundry, from the simplest to the most automated ones that use vertical warehouses for large casting, up to the inclusion of 3-level software that communicates with the customer's ERPs.

The production capacity developed by the plant located in the Czech Republic, with its covered surface of 30,000 m2, can realize complete plants and test all the equipment before shipment.

The factory has personnel for material preparation, cutting, welding and is equipped with an area dedicated to mechanical processing with updated machines in size and productivity.

For over 20 years the factory has built the largest plants ever realised in the No-bake and in the metallurgical sectors.

The after-sales service in Switzerland for technical assistance and support with spare parts to the plants, completes the panorama of activities developed by a dynamic and efficient group, always ready to support customers around the world.

Through the brand Bicor the group is able to build and service core-shooting machines.

The Czech and Swiss companies are completed by a branch in Bangalore - India, and an office in Italy. 


Molding line sold to Belarus.

Mobile mixer sold to Spain

Detail of proprietary software










FANUC Robotics Deutschland GmbH

Bernhäuser Straße 36 , 73765 Neuhausen a. d. F., Germany


Bernhäuser Straße 36
73765 Neuhausen a. d. F.

Telefon +49 7158 9873 - 0
Fax +49 7158 9873 - 100
E-Mail sales(at)fanucrobotics.de

Pressemitteilungen & News

JP - Fanuc to build new plant to harness 5G and self-driving demand
Japanese industrial robot maker Fanuc plans to spend 3.5 billion yen ($28.3 mill...
General Motors Honors FANUC as Inaugural Winner of Coveted Supplier Innovation Award
FANUC was named a GM Innovation Award winner during General Motors 24th annual S...


Via dell’Artigianato, 26, 22063 Cantù (CO), ITALY


Via dell’Artigianato, 26
22063 Cantù (CO)

FARO Europe GmbH & Co. KG

Lingwiesenstr. 11/2, 70825 Korntal-Münchingen, Germany


Lingwiesenstr. 11/2
70825 Korntal-Münchingen

Telefon +49 7150 9797-0
Fax +49 7150 9797 44

FAT Förder- und Anlagentechnik GmbH

Industriestr. 12, 57572 Niederfischbach, Germany


Industriestr. 12
57572 Niederfischbach

Telefon +49 2734-509-0
Fax +49 2734-6609
E-Mail fat.info(at)f-a-t.de

Vertretungen weltweit

FAT Equipment Manufacturing (Beijing) Co., Ltd.
Julong Garden, Building 7, 11R, 68 Xin Zhong Street Dong Cheng District
100027 Beijing
Phone: +86 1067349377


Since 1973, we have developed, designed and manufactured machines and plants for no bake foundrys.

In addition to mechanical reclamation, our portfolio also includes the thermal reclamation of used sand. FAT separates chromite sand and offers complete solutions for moulding plants with a high degree of automation. The components are designed and produced in our own work shops at Niederfischbach.

Environmental protection, sparing use of raw materials resources and ever higher demands on casting quality make a continuous improvement in processes necessary. Because of this economical, reasonable and sustainable recycling is becoming more and more important.

We take on these challenges.

Our products have been used successfully worldwide for decades. High reliability, extensive wear protection measures and long service lives, help to make production processes even more efficient. Scores of national and international customers in different industries benefit from the know-how and the experience of over 40 years company history. 

FATA Aluminum LLC.

2333 E. Walton Blvd., MI 48326 Auburn Hills, United States


2333 E. Walton Blvd.
MI 48326 Auburn Hills
United States

Telefon +12487247669
Fax +1248-659-1526
E-Mail info(at)fataaluminum.com

Pressemitteilungen & News

Foundry of the Future: Five questions for Marco Meneguzzo, the new General Manager at FATA Aluminum
Seven months after Marco Meneguzzo was chosen to lead FATA Group, he was given f...
As of April 2017, Fata Aluminum will open a sales and customer assistance office...
FATA Automation and FATA Aluminum have opened a new production facility in Aubur...


FATA Aluminum

World Headquarter: Auburn Hills, Michigan, U.S.A.

Among our customers, FATA Aluminum has 60 years of history of providing service to General Motors, Mercedes-Benz, Daimler Chrysler, Teksid, Nemak, and Volks Wagen.

FATA Aluminum has a strong background in foundry automation and process control. Serving the modern industry means exceeding customers expectations a constant attention is paid to each product from design to manufacturing, from commissioning to after sale service. FATA Aluminum is the number one leader in developing and manufacturing the pistons machinery.

The core business of FATA Aluminum is providing customers with aluminum gravity castings, sand regeneration plants, lost foam plants, core making machines, piston plants, and foundry tooling. FATA Aluminum is a global company that can also be located in Mexico, Italy, and China. Focused on improving the customer total value, with its strong industrial approach FATA Aluminum is moving forward to the global market, ready to take advantage of new opportunities.

Inhouse Contact
Giorgio Donini - gdonini(at)fataaluminum.com
Martin Mattia - mmattia(at)fatainc.com

FCRI & Jin Gang Group

No. 18, Liuyuan Road, Shiwan, 528031 Foshan, China


No. 18, Liuyuan Road, Shiwan
528031 Foshan


517 Avenue de la Boisse, 73000 Chambery, France


517 Avenue de la Boisse
73000 Chambery

Fill Gesellschaft mbH

Fillstraße 1, 4942 Gurten, Austria


Fillstraße 1
4942 Gurten

Telefon +43 (0)7757/7010-0
Fax +43 (0)7757/7010-275
E-Mail info(at)fill.co.at

Pressemitteilungen & News

Leading Innviertel company expands management team
Fill is setting the course for a successful future. Since 1 November 2020, Marti...
Magnetic Induction Casting – Low-Pressure Casting at a new Level
Cast aluminum components offer tremendous lightweight construction potential. Ne...
Deburring wheel for pre-deburring & deburring of castings
Casting burrs or other protrusions are simply knocked off by means of rotating, ...


Company Profile


Wer die beste Lösung sucht, entwickelt gemeinsam mit Fill seine Zukunft.

Dieser Anspruch wird seit 1966 gelebt. Dadurch entwickelte sich Fill im Laufe der Jahre zu einem der weltweit führenden Maschinen- und Anlagenbauer.

"Synergien aus den verschiedenen Produktionszweigen zu erkennen und sinnvoll zu nutzen, darin liegt unsere Stärke."
Andreas Fill





Das Steuer fest im Griff. Auf Überholkurs mit Verantwortung. Hohe Ansprüche in der Kunststoffverarbeitung fordern Lösungen von Fill. Mit Fill als Partner heißt das weltweite Spitzentechnologie für Premiumqualität.


Fill komponiert die international besten Produktionslösungen für die Be- und Verarbeitung von Compositeteilen.
Von der Faser bis zum fertigen Bauteil - Alles aus einer Hand.


Den Produktionsalltag immer vor Augen liefert Fill Maschinen und Anlagen, die auf rationelle Weise Produktivität und Qualität des Produktionsprozesses erhöhen.


Dort wo Standardmaschinen an ihre Grenzen stoßen. Wo die hohen Ansprüche des Kunden nur durch individuelle Lösungen erfüllt werden können. Dort ist Fill zu Hause - weltweit.


Das Team des Kompetenz Centers Service schafft gemeinsam mit Ihnen die besten Lösungen zur nachhaltigen Nutzung von Anlagen und Maschinen.

Das Leistungsangebot umfasst:


  • Casting and diecasting machines
  • Discharging, decoring, cleaning and finishing
  • Measuring and testing technology, quality control, laboratory equipment

Finite Solutions Inc

4769 Highland Park Dr , 53086-9441 Slinger, WI , United States


4769 Highland Park Dr
53086-9441 Slinger, WI
United States


Alameda Mercúrio, 164, Distrito Industrial, 13.347-662 Indaiatuba - SP, Brazil


Alameda Mercúrio, 164, Distrito Industrial
13.347-662 Indaiatuba - SP

Force Motors LTD




Pressemitteilungen & News

21 seater Traveller Smart Citibus15 seater Super luxury Traveller Royale and 9...

Foseco Foundry Division / Vesuvius GmbH

Gelsenkirchener Straße 10, 46325 Borken, Germany


Gelsenkirchener Straße 10
46325 Borken

Telefon 02861 83-0
Fax 02861 83-338
E-Mail info.germany(at)foseco.com

Vertretungen weltweit

Foseco Foundry Division, Foseco Española S.A.
Barrio Elizalde 5
48213 Izurza (Bizkaia)
Phone: +34 (0) 946 202 500
Fax: +34 (0) 946 203 773
Foseco Foundry Division, Foseco Foundry (China) Co Ltd.
806-807 Innov Tower, Block A, No. 1801, Hongmei Road, Xuhui District
200233 Shanghai
Phone: +86 (0) 21 3367 8188
Fax: +86 (0) 21 3367 8188
Foseco Foundry Division, Foseco Golden Gate Company Ltd.
No. 6, Kung Yeh 2nd Road, Ping Tung Industrial District
90049 R.O.C
Phone: +886 (0) 872 281 08
Fax: +886 (0) 872 281 82
Foseco Foundry Division, Foseco India Limited
Gat No. 922/923, Sanaswadi, Taluka Shirur
412 208 Dist.-Pune
Phone: +91 (0) 2137 668 100
Fax: +91 (0) 2137 668 160
Foseco Foundry Division, Foseco Industrial e Comercial Ltda. Brasil
Via Raposo Tavares, Km 15
05577-100 Sao Paulo
Phone: +55 (0) 11- 3719-9788
Fax: +55 (0) 11- 3731-0240
Foseco Foundry Division, Foseco International Limited, Middle East Office
Vesuvius Emirates FZE Warehouse No. 1J-09/3 P O Box 49261 Hamriyah Free Zone
United Arab Emirates
Phone: +971 (6) 526 237 0
Foseco Foundry Division, Foseco Japan Limited
Orix Kobe Sannomiya Bldg. 6-1-10, Gokodori, Chuo-Ku
651-0087 Kobe
Phone: +81 (0) 78 252 2231
Fax: +81 (0) 78 252 2261
Foseco Foundry Division, Foseco Korea Limited
235 Dodang-dong Wonmi-gu, Bucheon City
420-807 Gyeonggi-do
Republic of Korea
Phone: +82 (0) 32 675 3211
Fax: +82 (0) 32 675 7512
Foseco Foundry Division, Foseco Nederland B.V.
Binnenhavenstraat 20
7553 GJ Hengelo
Phone: +31 (0) 742 492 100
Fax: +31 (0) 742 424 125
Foseco Foundry Division, Foseco Portugal Produtos Para Fundicâo LDA.
Edificio Leixôes 3° Andar Terminal do Freixieiro E.N. 107 Apartado 5101
4456-901 Perafita
Phone: +351 (0) 229 999 530
Fax: +351 (0) 229 999 539
Foseco Foundry Division, Foseco Pty Limited Australia
No 7, Stuart St.
NSW 2211 Padstow
Phone: +61 (2) 99 145 500
Fax: +61 (2) 99 145 547
Foseco Foundry Division, Foseco Russia
Kooperativnaya Str. 10
140180 Zhukovsky, Moscow Region
Phone: +7 (0) 495 221 2511, + (0) 495 221 2512
Fax: +7 (0) 495 787 6114
Foseco Foundry Division, Foseco SAS France
Le Newton C, 7 Mail Barthélémy Thimonnier Lognes
77437 Marne La Vallée, Cedex 02
Phone: +33 (1) 64 735 555
Fax: +33 (1) 64 735 556
Foseco Foundry Division, Foseco Thailand Limited
22nd Floor, Ocean Tower 1, 170/69 Rachadapisek Road, Klongtoey
10110 Bangkok
Phone: +66 (0) 2 261 3164 67
Fax: +66 (0) 2 261 3168
Foseco Foundry Division, South Africa (Pty) Limited
12 Bosworth Street, Alrode
1450 Gauteng
South Africa
Phone: +27 (0) 119 039 500
Fax: +27 (0) 119 082 380
Foseco Foundry Division, Vesuvius Inc. Cleveland Foundry
20200 Sheldon Road
44142 Cleveland, Ohio
Phone: +1 (0) 4 408 264 548
Fax: +1 (0) 4 402 437 658
Foseco Foundry Division, Vesuvius Istanbul Sanayi ve Ticaret A.S.
Gebze Organize Sanayi Bolgesi 27 Mah. 1000. Cadde 12.Sok No:1022
41480 Gebze Kocaeli
Phone: +90 (0) 262 677 10 50
Fax: +90 (0) 262 677 10 60
Foseco Foundry Division, Vesuvius Italia S.p.A.
Via Ravello, 5/7, Quartiere Ravello
20080 Vermezzo (MI)
Phone: +39 (02) 949 819 1
Fax: +39 (02) 949 430 20
Foseco Foundry Division, Vesuvius Malaysia And Bhd
Lot PT 11693 (Block B) Jalan Pelabuhan Utara, Kawasan Industri Bandar Sultan Suleiman
42000 Pelabuhan Klang, Selangor D.E.
Phone: +603 3176 0508 ext 13, 14, 15, 16, 12
Fax: +603 3176 0608
Foseco Foundry Division, Vesuvius Mexico-Monterrey, Foseco Sa de Cv
Lucio Blanco 232, 10 de Mayo Guadalupe, Nuevo León
67130 Guadelupe
Phone: +52 (81) 83 79 6513
Fax: +52 (81) 83 34 3559
Foseco Foundry Division, Vesuvius PT Foseco Indonesia
Jalan Rawagelam II, No. 5, Kawasan Industri, Pulogadung
13930 Jakarta Timur
Phone: +62 (0) 214 605 555
Fax: +62 (0) 214 603 489
Foseco Foundry Division, Vesuvius Scandinavia AB
Förradsgatan 4
662 34 Amal
Phone: +46 (0) 532 607 730
Fax: +46 (0) 532 607 749
Foseco Foundry Division, Vesuvius Slavia A. S.
Lešetínská 47
CZ-71900 Ostrava-Kunčice
Czech Republic
Phone: +42 (0) 595 221 412
Fax: +42 (0) 595 221 417
Foseco Foundry Division, Vesuvius UK Ltd.
B78 3TF Staffs
United Kingdom
Phone: +44 (0) 182 728 999 9
Fax: +44 (0) 182 725 080 6
Foseko Foundry Division, Vesuvius Polska Sp z o.o.
ul. Leonarda Da Vinci 5
44-109 Gliwice, Slaskie
Phone: +48 (0) 323 303 530
Fax: +48 (0) 323 303 535

Pressemitteilungen & News

Foseco: GIFA wird der Hotspot für das Gießereigeschäft in diesem Jahr
Auf dem Foseco-Stand werden die Besucher neue, innovative Lösungen für Eisen-,...
Foseco at GIFA – this year's hotspot for the foundry business
At the Foseco booth, visitors will discover new, innovative solutions for iron, ...
Novel SCK Feeding Systems from Foseco
After extensive trials and experiences, Foseco has launched the innovative, new...


Foseco – den Gießereien verpflichtet

Foseco ist ein weltweit führender Lieferant von Gießereihilfsmitteln und Lösungen für die Gießereiindustrie. Unsere Lösungen und unsere fortschrittlichen Computer-Simulationsprogramme ermöglichen es Gießereien, Gussfehler wie Pinholes, Lunker, Einschlüsse, Schülpen, Penetration oder Blattrippen zu reduzieren. Daher verringern Foseco Produkte arbeitsintensives Putzen und Nachbearbeiten, erleichtern die Verarbeitung des Metalls, beeinflussen die Metallerstarrung und automatisieren den Form- und Gießprozess, wodurch sich wiederum Kosten, Energieverbrauch und die Größe der Form verringern.

Das umfangreiche Angebot an Gießereitechnik für Eisen-, Stahl- und Nichteisengießereien umfasst exotherme und isolierende Speisungssysteme, Filter für Eisen-, Stahl- und Aluminiumschmelze, das Direkteingussverfahren, Software zur Simulation des Erstarrungsverhaltens, Schmelzebehandlungen und Entgasungssysteme für Nichteisengießereien, Gießstrahlimpfung, moderne Schlichten für den Sandguss sowie Kokillenschlichten, umweltfreundliche Bindemittel, Auskleidungssysteme für Pfannen und Öfen sowie energiesparende Tiegel.


Foseco bietet ein umfangreiches Sortiment von Technologien, Anlagen und Verbrauchsgütern für die Gießereiindustrie.

  • Kalthärtende Furan-, Phenol-, Alkaliphenol- und  Polyurethan-Harzbindersysteme.
  • Polyurethan Cold-Box und CO2 Bindersysteme
  • CO2- und Ester härtende Natriumsilikatbindemittel
  • Trennmittel, Klebstoffe und Dichtungsmassen sowie Sandadditive
  • Schlichten für Sandformen- und Kerne
  • Kokillenschlichten
  • Schlichteaufbereitungsanlagen
  • Elektrostatische Schlichten
  • Schlichten für Vollformgießverfahren und Lost Foam Prozesse
  • Schlichten für Schleudergussrohre und Walzen
  • Metallurgische Schlichten
  • Direkteingusstechnik / Filterspeisertechnik
  • Exotherme Speiser
  • Exotherm-isolierende Speisereinsätze
  • Isolierende Speisereinsätze
  • Fflexible Glieder-Matten, Lunkerpulver, exotherme und isolierende Speiserabdeckplatten
  • Keramische Gießfilter in Schaumstruktur, Zirkonoxid- und Aluminiumoxid-Gießfilter
  • nichtkeramische Gießfilter für Aluminiumlegierungen
  • Bauteilen für Einguss- und Gießsysteme
  • Feuerfeste Auskleidungssysteme für Pfannen und Öfen
  • Vorgefertigte Formen für Aluminium und Zink
  • Tiegel aus SiC und Tongraphit, zum Schmelzen und Warmhalten
  • Stopfen und Ausgüsse
  • Impfmittel, Kugelgraphitbildner, Flussmittel und Schlackenbinder
  • INITEK Behandlungstechnologie für GJS und GJV
  • automatische Gießstrahlimpfsysteme und Kontrollsysteme für Gießstrahlimpfung
  • Entgasungs- und Schmelzebehandlungsanlagen
  • Produkte zum Abkrätzen, Abdecken und Reinigen von Aluminiumlegierungen
  • Kornfeiner und Veredelungsmittel Aluminiumlegierungen
  • Produkte zur Behandlung von Kupfer-, Magnesium- und Zinklegierungen

Darüber hinaus bietet Foseco ein erweitertes Produktportfolio für die Feingussindustrie

  • Einmal- und Backup-Tiegel
  • Filter mit feinerer Porosität sowie die gerahmten keramischen Schaumstrukturfilter auf Zirkonbasis
  • Lunkerpulver
  • Feuerfeste Auskleidungssysteme für Pfannen und Öfen
  • Modernste Entgasungs- und Schmelzebehandlungs-Technologien
  • Tiegel aus SiC und Tongraphit, zum Schmelzen und Warmhalten

Foundry Machinery & Spares Limited

Unit G & H, Fryers Close, Bloxwich,, WS3 2XQ Walsall, United Kingdom


Unit G & H, Fryers Close, Bloxwich,
WS3 2XQ Walsall
United Kingdom

Telefon + 44 (0) 1922 493603
Fax + 44 (0) 1922 713729
E-Mail info(at)fmslimited.co.uk


Best known for its continuous mixer technology, UK-based Foundry Machinery & Spares Ltd specialises in the full 3D design, manufacture, installation and commissioning of No-Bake Foundry equipment. This successful family owned, and managed business currently enjoys the strongest order book ever as well as expanding sales opportunities throughout the world.

Tony Perkins has been developing equipment for the foundry industry since 1980, including the last 20 years with son, Craig. They Created Foundry Machinery & Spares Ltd (FMS) in 1999, a business that has grown exponentially in the intervening period, developing, manufacturing and selling an extensive range of No-Bake equipment for the chemically-bonded sand Foundries. The product range includes sand mixers, mould handling equipment including the  TRANSTEK Rapid mould making technology (boasting 25% faster speeds than comparable fast loop systems while achieving a 60% reduction in total foot print area), core making,  casting and cooling devices and reclamation equipment (mechanical and Thermal),  as well as chemical storage and distribution systems.

FMS has recently updated its digital brochure making it “more accessible and usable for our representatives and customers while being available for download on our updated website”, The digit brochure is a great tool, showcasing the high-quality range as well as previously completed projects. Spare parts are a highly important part of the business, especially as equipment is exported all over the world, “it is important to us to react and support our customers quickly and effectively, to accommodate this, we have substantially increased consignment stock allowing orders to be satisfied within a matter of days” says Dan Sullivan (Sales manager).Year on year the customer base grows, 2017 has been the highest to date both domestically and internationally. The volume of recommendations and repeat business generated are further positive signs of the company’s position in the no-bake equipment marketplace.

  • Foundry Machinery & Spares Limited
  • Foundry Machinery & Spares Limited
  • Foundry Machinery & Spares Limited

Produkte & Leistungen

“The last few years have witnessed a number of important changes to the sand mixing technology at many foundries, especially with respect to process control” Craig Perkins suggests. In particular, this has involved the increased adoption of greater chemical pumping accuracy with respect to dosing, temperature blending and box filling, as well as the accurate logging of moulding boxes etc.  

“Customers are investing increasingly in the latest technology to improve production efficiencies and calling upon FMS to assist with the realisation of these efforts.” In many instances, foundries approach the UK based supplier for solutions to specific materials handling issues, a design process which often results in the involvement of our 3D design team creating models to simulate the operating procedure and benefits of the proposed solution. In other cases, FMS has devised improvements to conventional sand handling procedures, based on long-term experience in the industry. “spending so much time on site, we have the opportunity to observe equipment in operation, which in turn stimulates the creation of process efficiency improvements and ideas for financial savings.” This has included temperature blending innovation which provides savings in chemicals, with short payback times.

FMS is constantly striving to improve and innovative with leading technology to its production portfolio be it via research and development or quality contacts. A more recent example of this would be the partnership between FMS and TRANSTEK, an experienced company who specialise in Mould handling, TRANSTEK came up with an innovative design for mould production with their RAPID.  The RAPID moulding line is a vertical pattern loop system. This brings the advantage of very small foot-print area. Furthermore, since the elevators can store 2 bolsters at the same time, the length of the system is reduced by the length of one station. The foot print area saving is up to 60% when compared to any horizontal loop system. RAPID vertical loop provides about 20-30 seconds faster cycle times than any conventional loop systems especially with short filling time systems, thanks to its continuous elevators. They operate in one direction only so that the precious return and eject-reload transfer times are saved.

FMS holds the worldwide rights to Transtek RAPID system, with a number of units working today and more in production, they know the RAPID technology will be the perfect solution for many Foundries requirements.

Turnkey Services 

The provision of turnkey projects is an increasingly important part of the FMS service, especially for those clients who prefer equipment to be fully designed, built, delivered, installed and commissioned as a complete package. In many instances this also includes for the provisions of an onsite support and training presence for the efficient use of the latest No-bake technology. This turnkey approach has been adopted in a number of recent projects, one that stands out is a full thermal reclamation plant for a very well-respected Aluminium Foundry in France. FMS were able to improve the design of their thermal reclamation unit adding many process benefits while delivery a 100% turnkey installation.

Foundry Service GmbH

Sonnenblumenallee 12 (near Grohe Forum), 58675 Hemer, Germany


Sonnenblumenallee 12 (near Grohe Forum)
58675 Hemer

Pressemitteilungen & News

Legionella - a serious topic for foundries?
In 2013, mysterious waves of illness with flu-like effects and in some cases sev...
Optimizing Production Facilities in Foundries
With regular maintenance, production facilities in foundries reach an average s...
RSD 180 V – The New Benchmark in Drive Technology
In the past and present, volume sizes of 30,000 kg of liquid metal have been mov...

Furtenbach GmbH

Neunkirchner Str. 88, 2700 Wiener Neustadt, Germany


Neunkirchner Str. 88
2700 Wiener Neustadt

Youtube Linkedin Xing