Greensand to Core Shop Reclamation Using Secondary Attrition

Greensand back to core-shop What is the objective ?

• Greensand foundries have traditionally used new sand for core-shop applications.
• As the cost on new sand purchases and disposal increases so the demand to use reclaim sand has increased.
• Predominant binders used in core-shop is phenolic urethane cold box.
• Technical difficulties associated with using cold box process with sands that are alkaline in nature, has lead to foundries using the easy option of new sand only application.
• When the volume of sand required for core making exceeds the level of losses in the moulding line, large quantities of greensand need to be disposed off on a daily basis.

The Challenge !

• Waste greensand is heavily contaminated with clay, coal dust and residual binder.
• The urethane (cold box) process is very susceptible to clay and if not removed will reduce bench life and strength.

I have read and understood the privacy/terms and conditions and consent to the ascertainment, conversion, utilisation and dissemination of the data I have entered into this registration form. The Foundry-planet GmbH and originator/sponsor of the document may use my contact data for the purpose of B2B marketing (via e-mail, phone, display and postal) until such time as I withdraw my consent. My agreement to the company and our partner as shown below can be revoked at any time via an E-Mail to the following address: datenschutz(at)foundry-planet.com

Ich habe die rechtlichen Hinweise gelesen und willige in die Erhebung, Verarbeitung, Nutzung und Weitergabe meiner im Registrierungsformular angegebenen Daten durch die Foundry-Planet GmbH und die mit ihr verbundenen Partner. Die Foundry-Planet GmbH und der jeweilige Partner dürfen meine Kontaktdaten für den Zweck des B2B-Marketings (via E-Mail, Telefon, Display und postalisch) bis zu einem Widerruf nutzen. Meine Einwilligung kann ich jederzeit mit Wirkung für die Zukunft schriftlich per E-Mail über die folgende Adresse widerrufen: datenschutz(at)foundry-planet.com

 

Der Anbieter dieses Whitepaper

Zurück zur Liste