Whitepaper: Ladle coating for temperatures exceeding 1400 °C

Isolat® Coate Hydro is a concentrated ready-for-use coating with insulating properties. By using a suitable brush the material is applied to ladles, steel crucibles, and all metal parts, which need to be protected against metal erosion. Once Isolat® Coate Hydro has been diluted with tap water, this mixture can be applied by spray or the parts to be coated can be dipped.

Isolat® Coate Hydro contains binders and ceramic pigments with anti-adhesive properties withstanding temperatures exceeding 1400 °C.

The separating layer formed is glassy hard and prevents the melt from sticking. Depending on the application, the ceramic layer lasts between 100 and 400 castings. With each casting, a micro part of the film is peeled off the surface until it is used up at some point.

To date the application of Isolat® Coate Hydro has not shown any negative effect on the casting quality.

Visit the Tribo-Chemie website for more information...

I have read and understood the privacy/terms and conditions and consent to the ascertainment, conversion, utilisation and dissemination of the data I have entered into this registration form. The Foundry-planet GmbH and originator/sponsor of the document may use my contact data for the purpose of B2B marketing (via e-mail, phone, display and postal) until such time as I withdraw my consent. My agreement to the company and our partner as shown below can be revoked at any time via an E-Mail to the following address: datenschutz(at)foundry-planet.com

Ich habe die rechtlichen Hinweise gelesen und willige in die Erhebung, Verarbeitung, Nutzung und Weitergabe meiner im Registrierungsformular angegebenen Daten durch die Foundry-Planet GmbH und die mit ihr verbundenen Partner. Die Foundry-Planet GmbH und der jeweilige Partner dürfen meine Kontaktdaten für den Zweck des B2B-Marketings (via E-Mail, Telefon, Display und postalisch) bis zu einem Widerruf nutzen. Meine Einwilligung kann ich jederzeit mit Wirkung für die Zukunft schriftlich per E-Mail über die folgende Adresse widerrufen: datenschutz(at)foundry-planet.com

 

Der Anbieter dieses Whitepaper

Zurück zur Liste