Partner

Lippmann GmbH - German supplier of heatresistant textiles

Reading time: min

also available in  <link _top external-link-new-window>Deutsch

Lippmann GmbH is a German supplier of heatresistant textiles and  special protective hoses and sleevings for the steel producing and processing industry. As one product of our trademark PROTECTOR™ we produce a non-conductive cooling water hose with hardly inflammable and self-extinguishing cover for induction furnaces.Our PROTECTOR™ abrasive is especially developed for water-cooled high current cables at arc and ladle furnaces. It has excellent physical properties and it is extremely resistant to abrasion.

Through the integrated red and green rubber layers there is a traffic-light-effect that provides easy control of abrasion.Our PROTECTOR™ abrasive is especially developed for water-cooled high current cables at arc and ladle furnaces. It has excellent physical properties and it is extremely resistant to abrasion. Through the integrated red and green rubber layers there is a traffic-light-effect that provides easy control of abrasion.Our PROTECTOR™ fire-protection sleeving is used as a heatresistant sleeving for cables, hydraulic and pneumatic lines as well as for cooling-water hoses under the most difficult conditions.It is an ideal protection against liquid metal splashes (+1500°C), direct flames, sparks and radiation heat.

We  assemble complete hose lines and cut or sew curtains, sleevings, hoses and mats accoring to our customers needs in our own workshop and sewing room.


Different Products of Lippmann GmbH

 

Protector™ - Electro-Hose

Construction:

  • lining is made of hot water resistant EPDM
  • reinforcements are made of high-strength technical fibres
  • CR / EPDM cover (self-extinguishing, partly oil-resistant, resistant to ozone + UV)

We grant a 5 year guarantee for the quality and processing of our Protector™  Electro-Hose.

Our branded product Protector™ is a non-conductive cooling water hose for induction furnaces and arc-furnaces.
Protector™ - Electro Hose Type ABRASIV the “traffic light hose”

The hose for water-cooled high current cable for arc-furnaces. 

This hose meets the highest quality requirements:

  • non-conductive
  • excellent physical properties + extremely resistant to abrasion
  • cover non-flammable, self-extinguishing
  • traffic light effect for easy inspection

Protector™ Fire Protection - Sleeving

The cover solution for cables and leads, hydraulic hoses and rubber hose lines as protection against high temperatures, open flames, radiation heat and liquid metal splashes.  (Test with liquid steel at appr. + 1.500° C)
 
The high effectiveness of our Protector™ Fire Protection Sleeving requires a certain quantity of air between the wiring / cables which it protects and the fire protection sleeving itself. We have all inner diameters from DN 10 up to DN 250 mm on stock.

Protector™ Fire Protection Sleeving Variable

The variable solution as ideal protection of electric cables, hydraulic- and cooling water hoses as well as pneumatic leads against radiation heat or liquid metal splashes.Every inner diameter and single lengths are available on customer’s request and could be produced on short notice.   Our flexible system offers the possibility to replace cables or hoses due to the simple opening and closing.

Material:

Therm-Textil®-Cloth (+ 700° C continuous temperature resistance)
with self-extinguishing silicone coating (grey) outside

Type I  = with longitudinal seam
Type II  =  with Velcro® fastener
Type III = with push-bottom


Contact at <link _top external-link-new-window>Lippmann GmbH in our Suppliers Profile
[25]