B2B Portal for Technical and Commercial Foundry Management
Languages

Foundry Daily News

12. February 2015

EGA Jebel Ali site launches project to enhance operations

Groundbreaking ceremony heralds start of energy optimization and capacity creep project
United Arab Emirates: Since its inception in 1979, the Jebel Ali smelter operation owned by Emirates Global Aluminium PJSC ("EGA") has been committed to continuous innovation in the aluminium smelting process and the in-house development of proprietary, reduction technologies. Over the years, a strong reputation has been built for technological innovation and business performance excellence, characterized by maximum operating efficiencies.

This tradition continues today, as highlighted by a groundbreaking ceremony at EGA Jebel Ali (also known as Dubai Aluminium or " DUBAL ") on Thursday 5 February 2015 to mark the official start of the smelter operation's latest project that targets energy optimization and capacity creep. The project has three core components:

Replacing 513 pots in Potlines 1 to 3 with D18+ Technology cells - This follows a pilot project that successful demonstrated EGA's expertise in retrofitting older potlines. Seven former D18 Technology cells in Potline 1 were completely modernized in 2012 by incorporating more modern technologies that offer improved performance and economic competitiveness. The product of extensive in-house modeling, the new D18+ Technology cells achieved operating targets - notably a reduction in net specific energy consumption to below 13 kWh/kg Al; delivering current efficiency greater than 95 per cent; and an increase in production capacity to 2.0 tonnes Al/day. Based on these performance standards, the remaining 513 pots in Potlines 1 to 3 will be replaced with D18+ Technology cells.

This is the first project at EGA Jebel Ali to install new technology in an existing potline. When the project is completed, the operating amperage of Potlines 1 to 3 will have increased from 205 kA to 230kA, increasing production by about 40,000 tpa, while using similar power as the existing D18 potlines. First hot metal from the upgraded potlines is targeted for September 2015.

Adding 4 DX Technology cells to Potline 8 - Originally developed in 2006, the first generation DX Technology was installed in the 40-cell Potline 8 at EGA Jebel Ali in 2008 and has operated stably ever since. The cells began operating at 340 kA and reached 401 kA by the end of 2014. This increased operating amperage, together with the associated reduction in specific energy consumption, has allowed for additional DX Technology cells to be added to Potline 8 - which, in turn, will increase the line's production capacity.

DX Technology was also implemented in the 756 cells built in Phase I of EGA's Al Taweelah smelter operation (also known as Emirates Aluminium or " EMAL "), which currently operate at about 400 kA (creep to 410 kA is planned by the end of 2015).

Adding 6 D20+ Technology cells to Potline 5B - Inspired by the success of the D18+ Technology pilot project in maximizing production with the available power, experimental modifications were introduced to modernize the D20 Technology cells in Potline 5B at EGA Jebel Ali. This resulted in reduced specific energy consumption, allowing for additional D20+ Technology cells to be added to the line. The modifications also yielded higher hot metal production, thus contributing to further production creep.

"For EGA, optimising energy efficiency is a key strategic objective that aims to minimise operational impact on the environment while ameliorating the significant cost of energy," says Dr Ali Al Zarouni (Vice President: Jebel Ali Operations). "These factors have underpinned the development of advanced technologies that not only increase productivity, but also reduce our operations' impact on the environment through improved energy-efficiency and reduced emission levels. Using these technologies is integral to EGA's drive to ensure long-term competitiveness in an industry that is sensitive to product quality, costs and, increasingly, environmental performance."

Yousuf Bastaki (Senior Vice President: Major Projects) advises that SNC Lavalin has been appointed as the EPCM provider for the energy optimization and capacity creep project at EGA Jebel Ali. "The owner's team has enough strength, confident and experience to lead the EPCM to achieve the best KPIs of the project record, based on the recent series of successes in executing EMAL Phase1 and Phase 2 with a CAPEX value of $10 billion. We are committed, as the owner's team, to complete the project safely on budget and within the agreed programme of implementation, not compromising the relationship with our stakeholders including our long-term committed suppliers, while fostering the development of our National Engineers."

About EGA
Emirates Global Aluminium ("EGA") is a jointly-held, equal-ownership company formed by Mubadala Development Company of Abu Dhabi and the Investment Corporation of Dubai by combining their respective aluminium industry interests. EGA's core operating assets are Dubai Aluminium (" DUBAL ", also known as EGA Jebel Ali) and Emirates Aluminium (" EMAL ", also known as EGA Al Taweelah), whose combined annual production capacity of 2.4 million tonnes per annum ("tpa") places EGA among the top five primary aluminium producers in the world, by volume. The UAE-based EGA also owns Guinea Alumina Corporation ("GAC"), a strategic bauxite mine and alumina refinery development project in West Africa. In addition, EGA has plans for significant local growth and international expansion.

DUBAL , where commissioning began in 1979, operates one of the world's largest single-site primary aluminium smelters. The DUBAL complex, built on a 4.75 square kilometre site in Jebel Ali, Dubai, comprises a 1 million tpa smelter, a 2,350 MW power station, a large carbon plant, extensive casting operations (more than 1.2 million tpa), a water desalination plant, dock and other facilities. DUBALholds ISO 9001, ISO 14001, ISO/TS 16949, ISO/IEC 20000-1, ISO/IEC 27001, ISO 29990, ISO 50001 and OHSAS 18001 certification. EMAL , where commissioning began at the end of 2009, is the world's largest single-site primary aluminium smelter. The EMAL complex, housed on a 6 square kilometre site in Al Taweelah, Abu Dhabi, comprises a 1.3 million tpa smelter, a 3,100 MW power station, a large carbon plant, extensive casting operations (more than 1.7 million tpa), a water desalination plant, dock and other facilities.EMAL holds ISO 9001 accreditation and Nebosh certification in Occupational Health and Safety.

The combined DUBAL - EMAL portfolio comprises high quality primary aluminium products in three main categories: high purity and foundry re-melt products (for electronics and aerospace and automotive applications respectively); rolled products (for packaging, lithographic sheets and the automotive industry); and billets for extrusion and forging (for construction, industrial, transportation and automotive purposes). Busbars and anode bars are also made for the electrolytic process used to produce primary aluminium from alumina ore. Over 350 customers are served in at least 68 countries, predominantly in Asia, Europe, the MENA region and the Americas.

Source: zawya.com

Related Articles

Youtube Google+ Linkedin Xing