B2B Portal for Technical and Commercial Foundry Management
Languages

The Bright World of Metals

The four global trade fairs in the heart of Europe - the meeting point of the industry for the top decision makers

In the summer of 2019, GIFA, METEC, THERMPROCESS and NEWCAST have been presented together in Düsseldorf as the quartet of technology trade fairs.

As an international trade fair quartet, the GIFA, METEC, THERMPROCESS and the NEWCAST 2019 presented products and services, technologies and current trends for the global markets of tomorrow.

With a unique trade fair concept, methods for a lasting value creation chain was presented. The GIFA, METEC, THERMPROCESS and the NEWCAST – all four trade fairs offered high-calibre “business to business” encounters.

International purchasers, users and industry leaders have met their customers here, who are looking forward into the future. 

Calendar
 Hotel & City Info
Exhibitor-List GIFA 2019

GIFA News

26. May 2015

ITACA - Thermal Analysis System for Iron Foundries

ITACA* thermal analysis systems help foundries monitor metallurgical process prerformance by analysing base and final iron quality. ITACA Melt Deck minimises variances in base iron by providing the operator information necessary...

26. May 2015

Dynamic Inoculation for Iron and Steel Foundries

The manufacturing cost of ductile Iron castings is a major limiting factor for foundries to compete against alternative materials such as welded components or steel castings.Dynamic Inoculation offers foundries the opportunity to...

26. May 2015

Pouring temperature measurement for cast iron

The temperature measurement of cast iron is quite a complex subject. The temperature of a bath of molten metal is by essence not homogeneous. You can have in the same molten bath, discrepancies of temperature that can reach...

26. May 2015

Feeding Technology for Iron and Steel Foundries

For many foundries the pursuit of casting yield improvement and cleaning cost reduction has necessitated the development of customised feeding system solutions. The challenges and demands facing our customers today require that...

21. May 2015

New board material from RAMPF opens up new dimensions in foundry modeling

RAKU-TOOL® WB-1258 with exceptional abrasion resistance to be unveiled at GIFA 2015 – Hall 15, booth A27Grafenberg, May 18th, 2015. World premiere at GIFA 2015 in Düsseldorf – RAMPF Tooling Solutions presents the new, highly...

21. May 2015

Allied Mineral Products: Connecting Tradition with Refractory Innovations

For over 50 years, Allied Mineral Products has been a leading manufacturer of monolithic refractories and precast refractory shapes. Our products are sold into the foundry, steel, aluminum, copper and zinc metals markets as well...

21. May 2015

Pyrotek to Demonstrate Energy-saving Capabilities at GIFA 2015

Pyrotek develops innovative systems for all foundry processes, which promote uniform and controlled heating, reduce energy costs, extend refractory life, improve metal quality and increase metal recovery. Pyrotek will...

21. May 2015

Advanced Vacuum Impregnation Equipment Featured at GIFA

Godfrey & Wing GmbH will feature the most advanced vacuum impregnation equipment in the world, the HVLV, at GIFA June 16-20 in Dusseldorf Germany at Dusseldorf Fairgrounds. Godfrey & Wing’s HVLV vacuum impregnation system...

21. May 2015

Metal Filtration Limited at GIFA 2015 – The Corundum Free Guarantee

AL II TECHNOLOGYWAM®AL II is a very special family of products which was specifically designed for the aluminum processing industry. This technology was developed in conjunction with the Department of Energy to specifically...

12. May 2015

Energetic air purification through innovative heat pump technology

Die casting processes generate huge amounts of gases and vapors, which consist of aerosols and fine smoke particles. Due to the occupational safety and environmental protection, these must be removed from the work area. For some...

07. May 2015

GIFA – The Bright World of Metals – Press Conference

Statement ofFriedrich-Georg KehrerProject DirectorPress Conference forGIFA, METEC, THERMPROCESS and NEWCASTApril 23, 2015 DusseldorfThe metallurgy exhibition quartet of GIFA, METEC, THERMPROCESS and NEWCAST is hitting it’s final...

05. May 2015

ASK Chemicals presents SOLITEC™ Drying Technology

Quick drying is the key In medium and large-scale casting, the even and rapid drying of refractory coatings is of tremendous importance – on the one hand, for productivity reasons and, on the other, for reasons of process...

30. April 2015

DISA & Wheelabrator - Get prepared for GIFA ´15

The bright world of metals: Visit DISA & Wheelabrator in Hall 16 Booth E10GIFA is the most important trade fair in the world for foundry technology. In 2011, more than 48,700 people visited the show to see exhibitors...

26. April 2015

O.M.LER 2000 - The new face of the de-coring process

O.M.LER 2000 continues its climb towards success in the World of the de-coring process for grey iron and aluminium castings: near the revolutionary pneumatic de-coring hammer AF1470, the company now presents the new monitoring...

22. April 2015

StrikoWestofen Group - Dosing technology redesigned

World premiere at the GIFA 2015 in Düsseldorf: StrikoWestofen unveils new series of dosing machinesStill under wraps: the StrikoWestofen Group (Gummersbach) will be surprising everyone at the GIFA 2015 in Düsseldorf with a...

08. April 2015

druckguss service deutschland GmbH: Leading the way in the service

Treat your machine a regenerative holiday at the Baltic Sea!The company Druckguss Service Deutschland GmbH, specializes in the service of die casting machines, offers this kind of special "holiday" for your...

07. April 2015

Increased Safety Measures in Cut-Off Technology

Vulcan Engineering incorporates the latest in advanced safety features while still offering reliable efficient equipment.The Fox® Air Float Cut-Off machine is ideal for gate and riser removal on small to medium size castings, or...

09. December 2014

ASK Chemicals showcases at GIFA 2015

Solutions from a Specialist Foundries have valued ASK Chemicals’ product portfolio for many years. Yet the ASK Chemicals brand represents far more than its range of premium products. As a supplier of foundry chemicals it also...

Displaying results 51 to 68 out of 68
<< First < Previous 1-50 51-68 Next > Last >>

Calendar


Dec 17 - Dec 23, 2018

Mon 12/17 Tue 12/18 Wed 12/19 Thu 12/20 Fri 12/21 Sat 12/22 Sun 12/23  
       
07am
08am
09am
10am
11am
12pm
01pm
02pm
03pm
04pm
05pm
06pm
07pm
08pm
09pm
10pm
11pm
Youtube Google+ Linkedin Xing