B2B Portal for Technical and Commercial Foundry Management
Languages

Corporate News

29. November 2018

„Lightweight Construction in Casting“ 2018

Highlight at Audi in Münchsmünster

28. November 2018

NIB funding Scania’s new foundry in Sweden

NIB has provided a EUR 75 million loan to the Swedish heavy transport vehicle manufacturer Scania to finance the company’s new foundry in Södertälje, Sweden.

27. November 2018

AM solutions – the new brand of the Rösler group for Additive Manufacturing

Technological partnerships for the post processing of AM components

26. November 2018

Roller conveyor shot blast machine Type X for XXL coating line in Germany

A Construction Blaster Type X roller conveyor blast machine from Wheelabrator plays an integral role in a new subcontract coating facility for extra extra large automotive parts in Germany.

23. November 2018

Opening of KELLER I.T.S. India

The opening ceremony of KELLER ITS India took place on October 22nd. At the same time, the new building was inaugurated.

22. November 2018

Electronics celebrates its anniversary!

A good reason to celebrate: Four decades of successful hardware and software development in the casting industry.

21. November 2018

Disa: THe Future of Foundries

DISA experts have delivered a series of guest lectures about the Future of Foundries to audiences at Portoroz in Slovenia, VDG Seminar in Dusseldorf, Germany and the World Foundry Congress. The insightful programme of lectures...

20. November 2018

Ankiros, Annofer and Turkcast, Istanbul 2018

Tradeshow triple bill Ankiros, Annofer and Turkcast impresses exhibitors and visitors

19. November 2018

Wolfgang Schmidt is the new CEO of the Handtmann Metallgusswerk, Systemtechnik and Leichtmetallgießerei Annaberg companies

As of 1st October 2018, Wolfgang Schmidt (53) has taken on the role of the CEO of the Albert Handtmann Metallgusswerk GmbH & Co. KG, Handtmann Systemtechnik GmbH & Co. KG and Handtmann Leichtmetallgießerei Annaberg GmbH...

17. November 2018

Polish Foundrymen's Day 2018

Foundry Industry - new solutions and prospects for the future. 14th December 2018, Krakow

16. November 2018

indometal 2018 – continues to gain momentum as the gateway to global technologies for the metal & steel industries

More than 6,700 visitors including key decision and policy makers and industry leaders from across Indonesia and the region visited the 3-day trade fair203 exhibiting companies from 22 countries brought with them the best in...

15. November 2018

Casting and steel – The future is digital

First-hand experience of the digital future no longer requires a visit to Silicon Valley. More and more companies are realising that within the quartet of technology trade fairs GIFA, METEC, THERMPROCESS and NEWCAST new and...

13. November 2018

World Foundry Summit 2018 - Rome

First edition of new event a success, with good feedback.

12. November 2018

Best in test: The ultimate validation for Westomat at Lenaal

Westomat has been selected as the dosing furnace of choice by Polish automotive and electronics parts producer Lenaal following head-to-head equipment analysis under real operating conditions. The foundry singled out the reliable...

09. November 2018

Successful premiere for EUROGUSS Mexico

Premiere of EUROGUSS Mexico a resounding success; Trade visitors impressed by exhibition and conference

08. November 2018

New compact centrifuge: Process water cleaning for low sludge loads

The high quality and eco-friendly alternative to settlement tanks

07. November 2018

Italpresse Gauss: Strengthened support services

Italpresse Gauss has significantly improved its services support in Asia Pacific and North America with bigger teams of service technicians, greater availability of parts and new infrastructure in both territories.

06. November 2018

Tenbloc ® in Elkem’s portfolio

Tenbloc® is a unique in the mould inoculant block which provides consistent, reliable and cost-effective inoculation for ductile and grey irons. This assists foundries to produce castings with improved metallurgical structures...

05. November 2018

ExOne On the way to “Casting 4.0”

Reverse Engineering and 3D printing help to reach goals

01. November 2018

Brembo Introduces New B-M6 Caliper at SEMA 2018

Brembo - the world leader and acknowledged innovator of brake technology - has debuted its all-new B-M6 six-piston aluminum monobloc brake caliper at the 2018 Specialty Equipment Market Association (SEMA) Show in Las...

31. October 2018

Clariant at 73rd World Foundry Congress as Gold Sponsor

At the recent World Foundry Congress in Krakow, Poland (23-27 September 2018), Clariant was present, both as a corporate gold sponsor of the event and with a with a BU FM team presenting Clariant’s sustainable solutions for...

30. October 2018

FATA's ECO_Rec Sand Regeneration System in Bulgaria

FATA’s fully automated Eco-Rec Sand Regeneration System can save significant sums on operating costs.

29. October 2018

10th VDI Conference "Casting Technology in Engine Construction 2019"

a combination of the highest information diversity and meetings of all industry expertshigh professional level and informative lecturesvery good mix of topics, many practical examples of all players involved We are celebrating...

26. October 2018

MPR INVESTS AND STREGTHENS ITS PRESENCE IN USA, MEXICO & CHINA

Over 70% of the production and turnover of Meccanica Pi.Erre (MPR) has a final destination in the foreign market, throughout Europe and beyond.

Displaying results 126 to 150 out of 2895
Youtube Google+ Linkedin Xing