Foundry Corporate News, Topic Sand & Binders, Topic Plant Technology, Equipment

18. October 2017

Foundry KUTES Metal in Turkey places its trust in EIRICH molding material preparation

Foundry KUTES Metal in Turkey places its trust in EIRICH molding material preparation


In recent years, EIRICH has been able to deliver several molding material preparation systems to Turkey. As well as improving the quality of the cast parts, this also helps to increase plant availability thanks to the comparatively low wear on the mixing tools. KUTES Metal Sanayi ve Tic. A.S. has now also decided to opt for an EIRICH molding material preparation system for its new production line in Çorlu.

Clay-bonded molding material is used primarily in the production of cast parts. There are a large number of parameters that impact on its suitability for use, including compactability, gas permeability and green strength. Only the use of optimized molding material can ensure fault-free cast parts. This means that the preparation of the molding material plays a central role in the process.

Preparation Process

In this preparation process, sand (return sand and new sand) is mixed with bonding clay (such as bentonite), additives (such as coal dust, pitch or bitumen products) and water. Through the addition of water, the bentonite swells up and exhibits adhesive strength. The water content has a large impact on the plasticity and therefore the compactability; it is absolutely essential that uniform water distribution is achieved throughout the molding material. This is why the molding material mixer plays such a crucial role in determining the quality of the preparation process. In recent decades, the EIRICH mixer, which is available in different sizes, has established itself as the best unit for this purpose; thanks to the design and properties of the system, it is ensured that optimum quality of the mix is achieved every time, thus ensuring a reproducible molding material quality that meets the highest quality demands. Another advantage is the fact that EIRICH offers complete molding sand preparation systems for foundries of all sizes – small, medium and large, and no matter whether for the production of just 5 t/h or more than 500 t/h.

Molding materials consist largely of natural raw materials. The properties of these materials can fluctuate, and likewise the return sand from the caster is not generally uniform. This is why EIRICH has developed an online tester for production control and monitoring. This device, which is called the QualiMaster AT1, automatically takes samples from every mixture of molding sand and then determines the controlled variables 'compactability' and 'shear strength' for each sample. The values are supplied to the process control system, which then adjusts the addition of additives and water as required. This ensures that the required molding material properties are very uniform and reproducible.

Scope of Delivery

The order for KUTES Metal includes the molding sand mixer, scales for weighing return sand, additives and water, as well as a molding sand aerator, which ensures better sand distribution in the molding box, higher compactability on the molding machine and, as a result, improved casting quality with reduced aftertreatment costs. The control technology for the system will also be supplied by EIRICH.

KUTES Metal has opted for future-proof and cost-effective technology. This upgrade to their production facilities will enable them to further expand their position as a manufacturer of high-quality cast parts.

Company Info

Maschinenfabrik Gustav Eirich GmbH & Co.KG

Walldürner Str. 50
74736 Hardheim

Phone: +496283510
Fax: +49 6283 51 325

E-Mail:eirich@eirich.de

Youtube Google+ Linkedin Xing