B2B Portal for Technical and Commercial Foundry Management

Daily News

23. July 2019

GER - Fiat Chrysler Automobiles Nominates ZF as Supplier for New 8-Speed Automatic Transmission

ZF to deliver 8-speed-transmission for rear-wheel drive and all-wheel drive vehicles with front-longitudinal drive configurationSignificant share of hybrid transmissions includedSecond largest single order for latest generation...

22. July 2019

SP - SEAT Componentes produces new gearbox for Group brands

Up to 450,000 new 6-speed gearboxes for Audi, SEAT, ŠKODA and Volkswagen

19. July 2019

Chinese Manufacturers? This Is Why Your Business Should Not Ignore Them!

Several businesses in the US and Europe have been outsourcing manufacturing to factories in China for several years now. If you ask those who have been holding out why they haven’t jumped on the bandwagon despite the obvious cost...

17. July 2019

China Diecasting 2019 Shanghai opened by Ficmes and Nuernberg Messe

As one of the most influential die casting trade fairs in the world, CHINA DIECASTING & CHINA NONFERROUS 2019 opened its doors again to the whole world today at Shanghai New International Expo Center, using Hall N1 to N3....

15. July 2019

UK-HRH The Duke of Gloucester invited to cast a plaque at historic Loughborough Bellfoundry during Royal Visit

His Royal Highness the Duke of Gloucester will be paying a special visit to the Loughborough Bellfoundry this July; discovering the vast heritage of the British industrial site and having the chance to cast his own commemorative...

11. July 2019

CAN-ENG Furnaces has been selected to deliver a New Aluminum High Integrity Thin Walled Casting Heat Treating System

Can-Eng Furnaces has been chosen to design and commission a high-capacity, heat-treatment system for a Tier 1 Global Automotive Manufacturing Company. The new system provides T-6 and T-7 processing capabilities for lightweight...

10. July 2019

ASK Chemicals will take over the business of the industrial resins of the SI Group

ASK Chemicals, one of the world's leading suppliers of foundry chemicals, today announced that a binding agreement has been reached to acquire the industrial resin business of SI Group (New York, USA). With this acquisition, ASK...

10. July 2019

ITA: IDRA Giga Press sold on GIFA 2019


10. July 2019

UK: Order boost creates new jobs at Black Country foundry

11 new jobs are being created at one of the Black Country’s fastest growing foundries after it announced a number of new contract wins.Midland Pressure Diecasting (MPD) is looking to recruit four casters, four manufacturing...

09. July 2019

AUS /SWE: Aurora allies with Swedish aluminium manufacturer

Aurora Labs has reached a memorandum of understanding with Swedish industrial company, Gränges AB, that could lead to further collaboration in the use of 3D printed aluminium in the automotive and other industries.Gränges is a...

08. July 2019

UAE /GER: EGA highlights UAE aluminium's important role in EU car industry at major German trade event

EGA supplies metal directly to two world-renowned European carmakers as well as to more than 15 of the most important parts makers in the European automotive industry's supply chain

05. July 2019

TCT Tesic: Wanted!

We are looking for following used foundry equipment for our clients. If you have these or similar good equipment, please contact us:       1. Disamatic moulding lineType: 2070 (any type) with PMC2. Furane...

04. July 2019

voestalpine’s Annual General Meeting resolves dividend of EUR 1.10; change of CEO completed

Pursuant to the proposal of both the Management Board and the Supervisory Board, the 27th Annual General Meeting (AGM) of voestalpine AG today resolved a dividend of EUR 1.10 per share for the business year 2018/19. This year’s...

04. July 2019

HA Group bundles commercial activities in Mexico

Successful creation of new joint venture with Garmi: HA Quimica de Mexico

04. July 2019

Rheinmetall: Best-seller from Hartha

One million electric vacuum pumps

03. July 2019

GER - GIFA 2019: ASK Chemicals presents its binder technologies for additive manufacturing processes

ASK Chemicals presents its solutions for 3D sand printing at GIFA 2019 from 25 to 29 June 2019. The Hilden-based company's 3D binder technology combines print head compatibility, dimensional accuracy and productivity.

03. July 2019

USA-Strong Signal to Brasil

Simpson Technologies Again Renews Technology License with Küttner do Brasil

02. July 2019

AU - Seven Refractories Presents Innovations at 2019 GIFA Trade Show

The 2019 GIFA in Düsseldorf comes at a crucial time for the steel and iron industry. In its largest trade show participation to date, Seven Refractories fulfills its mission as a technology leader and presents groundbreaking...

28. June 2019

BZ / SW - Tupy becomes first foundry to adopt SinterCast Cast Tracker technology

Complete traceability for sand cores, moulds and castings; from core assembly to shippingFirst Cast Tracker system installed for high volume series production at Tupy MexicoApplicable to all Compacted Graphite Iron, grey iron...

27. June 2019

Sinto Introduces New Joint Venture Company in Turkey

Provides Comprehensive and Faster After Service to Customer

26. June 2019

Answering foundry priorities & casting trends: LE+ Technology success at GIFA 2019

High surface quality for castings, less total cost of ownership & up to 90% reduction of BTEX emission recorded. Collaboration with customers in GIFA spotlight = foundry-proven performance & environmental success. Meet the...

23. June 2019

ABP Technology: What if Furnace Training Could be Done Off-Site?

Check out ABP's video on the right side to learn more about their newest technologies, which will be presented next week at GIFA.

22. June 2019

ABP Technology: What if Your Systems had a Smartphone

Check out ABP's video on the right side to learn more about their newest technologies, which will be presented next week at GIFA.

Displaying results 26 to 50 out of 5715
Youtube Linkedin Xing