Am Schölsbach 19
Telephone: +49 (0) 5451 85-0
Fax: +49 (0) 5451 85-412
Telephone +49 (0) 5451 85-320
KELLER ITS (Infrared Temperature Solutions) develops, manufactures and distributes pyrometers and system solutions for non-contact temperature measurements for industrial applications for temperature ranges between -30 °C and 3500 °C. The pyrometers are used in many industries such as steel, foundry, glass, cement or chemical.
With our 50 years of experience, we are the leading specialists for foundry applications and two-colour measurements.
Neue Weilheimer Straße 30
73230 Kirchheim unter Teck
Obere Hommeswiese 53 - 57
Our Company KLEIN Anlagenbau AG:
KLEIN Anlagenbau AG is an international system supplier offering turn-key solutions for the foundry industry, pneumatic conveying systems and systems for the maintenance of rail vehicles.
The company KLEIN Anlagenbau AG was founded in 1998 out of the former Alb. Klein GmbH& Co. KG in continuation of their more than 40 years of experience in this sector.
Our engineers develop, design and manufacture custom-made solutions for our clients.
Our well-trained specialists assist our customers during the installation phase and offer comprehensive after sales services.
Our test facilities offer the possibility to test even problematic bulk material and conceive custom-made solutions.Our aim is to supply high quality. Our quality assurance systems is certified in compliance with DIN EN ISO 9001:2015.
Welcome to KLEIN Stoßwellentechnik GmbH:
Since October 2018 KLEIN Stoßwellentechnik GmbH is a 100 % subsidiary of KLEIN Anlagenbau AG. With this takeover KLEIN Anlagenbau AG extended their competence in the sector of foundry equipment. In February 2019 both companies moved into their new company premises in 57258 Freudenberg, Obere Hommeswiese 53 - 57.
Fax: +49 2244 9248-30
Clean Air. Save Energy.
Your industry expert for air filtration & smoke extraction systems in foundries for 30 years!
2.000 ULTRAVENT® systems installed in foundries worldwide
KMA is an international environmental technology company for industrial applications headquartered in Germany and with a subsidiary in Shanghai. As leading solution provider KMA offers energy efficient exhaust air filter systems and 60 years of business experience relating to air purification, air filtration and heat recovery in various industry sectors – global market leader for air filtration in die casting foundries.
Less energy consumption means less costs.
In comparison with conventional exhaust air filtration systems KMA filter systems often save more than 80 % of energy costs. The energy savings are normally accompanied by a high reduction of CO2 emissions and thus a significant improvement of the customer’s carbon footprint.
Therefore, KMA filter systems have received a number of awards for their high eco-efficiency, e.g. the EU FoodTech Award and MM Award for Innovation. KMA has been honored recently with the LUDWIG SME Award in the category INNOVATION 2018.
Exhaust Air Filtration & Smoke Extraction Systems
Broad range of solutions for every die casting application
KMA air filtration systems dispose of a large range of standardized units in modular and flexible construction which permits its use for every foundry. This creates “tailor-made“ solutions and nevertheless allows the advantage of series production. At the same time the modular system enables individual adaptions to the die casting production facility.
Strong in separation performance. Small in energy consumption.
During the casting process often occur greasy, oily and pasty smokes, which can quickly clog the filter when using unsuitable filter material and thus could result in high follow-up and exchange costs. With the modular ULTRAVENT® system KMA offers an exhaust air filtration system especially developed for the foundry, which allows due to its cleverly harmonized elements the exact adaptation of the filter system to the needs of the foundry. In this way, dust, smoke, but also sticky or greasy aerosoles and various odours can be high efficiently filtered.
Our electrostatic filter cells achieve a high-grade separation of smoke, dust, fine mist and also sticky or greasy aerosols – for optimal clean air quality. The energy consumption of our electrostatic filter cells for an exhaust air volume of 5.000 m3/h meets the energy consumption of a 100 W light bulb.
Best-in-class filter separation – Energy efficient & durable
How does it work? The filter system consists of demister, electrostatic filter cells and automatic filter cleaning system. The core of the ULTRAVENT® system are electrostatic filter cells. These filters generate a strong electric field with little effort. The dust particles, smoke and aerosols are drawn to the collector plates. An automated and unique cleaning system („dish washer“) removes the residue. Changing the filter becomes unnecessary. The result: 99 % filtration efficiency.
Exhaust air filter systems can be manufactured as stand-alone solutions or connecting several machines to one filter station. The ULTRAVENT® is also suitable for an operation in a circulating air as well as exhaust air mode. The question of which system is used, is decided by the individual needs of the company. The key is: Whether in the circulating air or exhaust air mode, KMA ULTRAVENT® filter systems reduce energy consumption for air purification in foundries by up to 80 % and protect effectively the environment. KMA already sold more than 2,000 ULTRAVENT® systems around the world.
Find out more about KMA energy efficient Exhaust Air Filtration & Smoke Extraction Systems for die casting machines:
Learn how our customers save up to 80 % of their operation costs with KMA:
From conventional extract air mode, to an air filter system with heat recovery and heat pump up to energy saving air recirculation mode – there are various air filtration methods for die casting machines.
Which method fits best to your production facility is explained in the following case study.
Telephone: +49 6461-80080
Fax: +49 6461-800860
D-74722 Buchen (Odenwald)
Telephone: +49 821 45330
Fax: +49 821 4533 2340
Global Sales Center
Tel.: +49 821 4533-3483
About the KUKA Roboter GmbH
The KUKA Roboter GmbH, with its headquarters in Augsburg, is a member of the KUKA Aktiengesellschaft and ranks among the world’s leading suppliers of industrial robots. Core competencies are development, production and sale of industrial robots, controllers and software. The company is the market leader in Germany and Europe and the number three in the world. KUKA Roboter GmbH employs about 3400 people worldwide. In 2013, sales totaled 754,1 million Euro. 28 subsidiaries provide a presence in the major markets of Europe, America and Asia.
Über die KUKA Roboter Gruppe
Die KUKA Roboter GmbH mit Hauptsitz in Augsburg ist ein Unternehmen der KUKA Aktiengesellschaft und gilt als einer der weltweit führenden Anbieter von Industrierobotern. Die Kernkompetenzen liegen in der Entwicklung und Produktion sowie im Vertrieb von Industrierobotern, Steuerungen und Software. Das Unternehmen ist Marktführer in Deutschland und Europa, weltweit an dritter Stelle. Die KUKA Roboter GmbH beschäftigt weltweit etwa 3400 Mitarbeiter. In 2013 wurde ein Umsatz von 754,1 Mio. Euro erwirtschaftet. Das Unternehmen ist mit 28 Niederlassungen in den wichtigsten Märkten Europas, Amerikas und Asiens vertreten.
KUKA Robots in the foundry industry:
Kuka for Foundries: http://www.kuka-robotics.com/en/solutions/branches/foundry/start.htm
48 COOL ROBOT TYPES. IN SERVICE WHEREVER THINGS HEAT UP.
Heat, dust, aggressive fluids: when the going gets tough for human workers, tough KUKA robots get going – with outstanding performance in continuous operation. Based on many years of experience in the foundry sector and in the automotive industry, KUKA is now offering a unique range of 48 high-performance robot types – the KR QUANTEC F series. With protective coatings resistant to alkalis, acids, heat and corrosion, they permanently meet the requirements of protection ratings IP65/67. They are available as floor-, ceiling- and shelf-mounted robots and for payloads from 6 to 1,300 kg.
300 KG PURE HANDLING POWER: KR QUANTEC F SERIES – THE STRONGEST ROBOTS IN THEIR PAYLOAD CATEGORY
The basis for high performance and process reliability in hot surroundings.
Metal – red-hot, molten or solid. From intricate light alloy components to large-format steel parts: the KR QUANTEC F series masters all disciplines from sand casting and die casting to permanent mold casting and even the handling of heavy molds and finished components. It effortlessly handles payloads of up to 300 kg. The extremely robust and maintenance-friendly design makes it a sound investment for the future.
On request, all KUKA robots based on the KR C4 controller can be controlled directly via the Siemens® SINUMERIK operator panel of your machine – simple and with no need for special knowledge of robotics.
KR QUANTEC F: THE ADVANTAGES AT A GLANCE
Ideal combination of high payload capacity and small footprint
Fast and reliable – even for complex tasks
Availability: virtually 100%
Optimized cycle times
Easy integration of peripheral devices, e.g. deflashing presses and grippers
With their heat-, corrosion-, alkali- and acid-resistant coating, KUKA Foundry robots are optimally equipped for the harsh working environments in the foundry and forging industry. The specially-developed Foundry wrist with corrosion-resistant V2A materials is dustproof, waterproof and certified with protection rating IP67 for the entire life cycle of the robot.
Read more: www.kuka-robotics.com/en/solutions/branches/foundry/start.htm
These companies rely on KUKA: www.kuka-robotics.com/en/company/references/
Hannoversche Straße 59
Frankenstr. 2 (Industriegebiet Wiebelbach)
Telephone: +49 9342 / 807-0
Fax: +49 09342 807 404
GLOBAL. AHEAD. SUSTAINABLE.
Kurtz Ersa is a technology corporation with a tradition of more than 240 years. Our three areas of business – Electronics Production Equipment, Moulding Machines and Automation – offer innovative solutions for the manufacturing industry. As technology leader with 15 facilities and production plants in Germany, China and in the USA, Kurtz Ersa repeatedly sets new standards, thereby raising the productivity of its customers to higher levels. Since 1982, Kurtz GmbH has been producing foundry machines. Kurtz enjoys an excellent reputation as expert in low pressure and gravity casting machines as well as for trimming presses. Especially suppliers of the automotive industry benefit from individually planned, cost-saving and reliable Kurtz machines. Technologies of Kurtz Automotive optimize the production of chassis parts and ensure a sustainable future in the long term
In the field of low pressure casting, Kurtz provides low pressure casting machines which are operated with permanent moulds and casting machines for sand, plaster or ceramic moulds – so called "lost moulds". Both aluminium and magnesium alloys can be cast with a Kurtz low pressure casting machine. Low pressure casting is one of the most efficient processes for manufacturing chassis parts in series production – especially with multiple cavities and multiple riser tubes. It is energy efficient, offers high availability and delivers top quality with minimal scrap rates.
For small batch sizes, special materials and complex geometries, additive manufacturing plays to its strength. Its tool-free production is the fastest way from the idea to the production of the metal part. Without any limits in design, the part can be printed according to your individual requirements to get exactly the application you need. Find out more about our metallic 3d laser printer Kurtz Ersa Alpha 140 – a plug'n produce machine with best price-performance ratio.
The machine concept of Kurtz trimming presses includes the Kurtz KPC line of so called C-frame presses and the Kurtz KPS line as 4-column version, available with or without sliding-tilting table. You can be sure to have safe, efficient and reproducible trimming processes due to the perfect interaction of fast hydraulics, precise mechanics, reliable measuring systems and comfortable machine control. Press force ranges from 50 t to 300 t, subject to model and layout.
From project planning and commissioning up to maintenance, from stand-alone machines up to entire plants. Kurtz GmbH always focuses on the entire process and already thinks of an optimized mould parting line for efficient trimming when designing and developing a casting mould or machine. If requested, both casting machines and trimming presses are available as fully automated systems. All components and modules are optimally matched to one another. At Kurtz the customer obtains planning, engineering, process and mould technology, melting and furnace technology, automation, peripherals as well as complete casting lines. Kurtz Automotive Solutions stand out by their technological lead, reliability, high availability and profitability.
Driven by Kurtz Ersa.
Kurtz Ersa – Production needs us!
Telephone: +49 201 7293 0
Fax: +49 201 77 66 88
Küttner offers planning and modernization of entire foundries and provides beside the initial engineering services also the fabrication, erection and start-up of complete plant areas – all from a single source.
Küttner is world-wide known for the construction of modern cupola and also provides for many years sand preparation plants for green sand and reclamation systems for no-bake sands. Handling systems for serial and large castings on vibrating equipment are also part of the product range. All controls for machines and plants are made in-house with latest process logic and comprehensive data processing system from our Küttner Automation specialists.
Since 2014 the construction of centrifugal casting machines not only for cast iron but also for steel and NF-metals was started as a new technology for Küttners’ foundry portfolio.