Contact

Walldürner Str. 50
74736 Hardheim
Germany

Telephone +496283510
Fax +49 6283 51 325
Email eirich(at)eirich.de

Press Releases & News

Information

EIRICH - Pioneer in Material Processing

EIRICH has specialized in the processing of bentonite-bonded molding sand and has been working closely with foundrymen, molding line manufacturers and research facilities for decades. 

More than 2500 sand preparation plants installed worldwide in all Performance classes for gray cast iron, steel cast iron, aluminum cast iron and non-ferrous metal castings, supply molding lines of all important manufacturers and provide top performance in terms of quality, throughput and cost-efficiency.

The performance of a modern molding machine can be fully exploited only with a first-class and consistent quality of the molding sand - this is what the name EIRICH stands for.

The large number of plants supplied, whether EVACTHERM® technology or with the conventional cooler technology, documents Eirich worldwide leadership in molding sand preparation.

The competence and the reliable mastery of all steps of the sand cycle resulting from this experience, makes EIRICH a reliable partner of the foundryman, no matter whether it is about new construction, conversion or modernization.
 

Products & Services

• Molding sand mixers including a complete range of peripheral equipment
• Preparation of the innovative EVACTHERM® technology as well as with the cooling technology for all required throughput rates
• Automation and control systems developed and produced in house
• Installation and commissioning
• Training for operating and maintenance staff
• Tailored service solutions ranging from the dependable supply of genuine spare parts to condition monitoring and remote service systems
• Technology for eco-friendly handling and safe transportation of foundry dust

Contact

Kirchstr. 53
73765 Neuhausen / F.
Germany

Telephone +49 (0) 71 58 - 6 04 65
Fax +49 (0) 71 58 - 71 44
Email info(at)electronics-gmbh.de

Press Releases & News

Contact

Drammensveien 169
0213 Oslo
Norway

Telephone +47 22 450 100
Fax +47 22 450 152
Email foundry(at)elkem.com

Press Releases & News

Information

About Elkem Foundry Products

Elkem is the world’s largest supplier of ferrosilicon-based special alloys. Its customers for ferrosilicon include iron foundries and steel mills worldwide. The car industry, line pipe manufacturers and other mechanical engineering companies are also important customer categories, and applications for the company’s products include complex foundry goods such as engine blocks and manifolds. Ferrosilicon from Elkem is used by the steel industry to produce carbon and stainless grades.

Over the last few years Elkem has systematically expanded its foundry product portfolio, enabling us to provide a package of specialised products and services which will assist in providing solutions to many of the challenges encountered by our customers.

In addition to our traditional range of high quality inoculants, nodularisers and charge materials, backed by our local teams of trained sales personnel, we are now able to provide to ferrous and non-ferrous foundries

• design software and foundry process control systems as a result of our technology partnership with the leading software company Pico
• other speciality charge materials for foundry metallurgy which enable our customers to reduce their supplier base.

All of the above will continue to be supported by our global group of highly skilled foundry experts (Technical Customer Service) whose prime role is to render the advice and technical service which will lead to providing solutions to your challenges through partnership with Elkem.

Elkem Foundry Products' production plants

    •Elkem Bjølvefossen
    •Elkem Bremanger
    •Elkem Chicoutimi
    •Elkem Foundry China
    •Elkem Iceland

Elkem Foundry Technology Products R&D
Elkem Foundry Technology (EFT) Products R&D is a team of highly competent foundry metallurgists and researchers working in mainly three areas:

• Product Development and R&D
• Technical Market Support
• Plant Support

The EFT Products team is located in Elkem’s Research and Development Centre in Kristiansand, Norway.  This is probably the best equipped metallurgical centre in the industry.  The centre has a state of the art metallurgical and chemical laboratory with optical microscope with automatic image analyzing equipment, Scanning Electron Microscope with EDX analysis unit, chemical analyses equipment like X-Ray Fluorescence, Atomic absorption Spectrometry, ICP,  Leco etc.   For product development purposes  the centre has several induction furnaces with melting capacity from 30 to 1200 kg of cast iron, sand mixer for production of moulding sand and several patterns for production of trial moulds.  The tundish cover process is used for iron ductile iron treatment with treatments up to 300 kg.

In addition to R&D and product development the EFT Products team’s main focus is on technical documentation and technical training and support to Elkem’s sales force and production

Your Technology Partner
Elkem Foundry Products produces top quality nodularisers and inoculants on three continents to provide local, rapid and effective solutions for your metal treatment requirements. Flexibility in production and the ability to adapt to our customers needs, means that Elkem can manufacture what is best suited to your casting conditions. 


Products & markets - Our product range consists of:

• Elkem speciality Nodularisers
• Elkem Preconditioner
• Elkem speciality Inoculants
• Cored wire
• Elkem FerroSilicon to Steel
• Elkem Recarburisers
• Elkem Speciality Alloys/Charge Material

Product specifications
English

•    MgFeSi Alloys Preconditioner, Inoculants, Inserts
•    Ferrosilicon, Recarburisers, Mould Powder

German

•    FeSiMg-Vorlegierungen & Impflegierungen
•    Ferrosilicium & Aufkohlungsmittel

Russian

•    MgFeSi Alloys & Preconditioner, Inoculants, Inserts
•    Ferrosilicon, Recarburisers, Mould Powder

Turkish

•    Döküm Fabrikaları için Elkem Ürünleri
•    Demir Esaslı Döküm Fabrikaları için Elkem Ürünleri

More Products:


•    Preconditioner
•    Inoculants
•    Cored wire
•    Ferrosilicon to steel
•    Recarburisers
•    Charge materials



Quality & safety:

Important message regarding Materials Safety Data Sheets (MSDS) and Product Safety Information (PSI)

In light of the implementation of the globally harmonised system for classification and labelling of chemicals (UN-GHS), the term MSDS (Material Safety Data Sheet) is no longer used and has been substituted by SDS (Safety Data Sheet). According to REACH article 31(1), SDS is only required for hazard-classified substances. Since none of the products of Elkem Foundry are or contains substances that are hazard classified, SDS for these products is not legally required.


For more information on this issue, kindly refer to the UK REACH Competent Authority Information Leaflet Number 13 – REACH and Safety Data Sheets
Since our customers request health and safety information, Elkem will continue to provide HSE information on the various sales products on a voluntary basis. This Product Safety Information (PSI) contains the same information as given in authentic SDS, but compliance with REACH and CLP is not mandatory. Consequently, (M)SDS for most products are no longer maintained and are replaced by PSI.


Product Safety Information

Elkem inoculants, inserts and preconditioner


Elkem Grain Refiner™: United Kingdom, Norway
Recarburisers
Elgraph® Premium: 
Denmark, EU/GHS, Finland, France, Germany, Great Britain, Italy, Norway, Poland, Portugal, Sweden
Elgraph® Superior:
Denmark, EU/GHS, Finland, France, Germany, Great Britain, Italy, Norway, Poland, Portugal, Sweden
Pipe Dressing - Mould powders
Pipeinoc® : United Kingdom, France, Italy, Norway

Other products

Si/FeSi slag: United Kingdom, Spain, Norway
FeSi ovoids/briquettes:  United Kingdom, Germany
Alinoc®, Barinoc®, Foundrisil®, Reseed®,SMZ®, Superseed®,Superseed® Extra, Ultraseed®,Vaxon®, Zircinoc® inoculants, Elcast® inserts, Preseed™ preconditioner:
English, German, French, Spanish, Danish, Finnish, Norwegian, Swedish

Elkem MgFeSi alloys
Elmag®, Lamet®, Remag® nodularisers, CompactMag™ alloy:
English, German, French, Spanish, Danish, Finnish, Norwegian, Swedish
Elkem FeSi alloys
FeSi75, FeSi90 and others:
English, German, French, Spanish, Danish, Finnish, Norwegian, Swedish
Grain Refiner




 

Sales offices	General product inquiries		Certifications
Africa	Sales and marketing to steel		Elkem Bjølvefossen
Asia	Sales and marketing to foundry		ISO 9001   ISO 14001
Europe			Elkem Bremanger
North America	Production plants		ISO 9001   ISO 14001   ISO/TS 16949
South America			Elkem Chicoutimi
Oceania			ISO 9001   ISO 14001
			Elkem Foundry China
			ISO 9001   OHSAS 18001
			Elkem Iceland
			ISO 9001   ISO/TS 16949
			Elkem Tana
			ISO 9001
			Europe Sales
			ISO 9001-2008 (Child cert.)   ISO 9001-2008 (Main cert.)

Contact

1. Betts Mews
E17 8PQ London
United Kingdom

Telephone 00442085202248
Fax 0044 2085 2118 89
Email mica(at)elmelin.com

Press Releases & News

Contact

Europastraße 2/1
77933 Lahr / Schwarzwald
Germany

Contact

Gewerbestraße 6
86859 Igling
Germany

Press Releases & News

Contact

75. Yil mahallesi Tornacilar ve Oto Tamirciler Sitesi N blok No:14
26250 Eskisehir
Turkey

Contact

Polígono Industrial La Cruz, Parcela 4 5
48196 Lezama
Spain

Telephone (34) 944 761 244
Fax (34) 944 761 247
Email euroequip(at)euroequip.es

Press Releases & News

Information

Since its foundation in 1974, Euro-Equip has been involved in the modernization of Spanish foundries at the highest level. To this end, it has counted from the outset, with the collaboration of the most important foundry equipment suppliers in the world.

Our activity has been carried out in practically all the companies of the foundry sector, in Spain and in some of other countries. Foundries supplying components for the automotive, machinery, mining and naval industry are some of our main customers. Keeping us continuously in the knowledge of the latest technical advances give us the possibility to propose to our customers the best solution for each of their needs with proven efficiency.

In Euro-Equip we are not limited to incorporating a certain machine or to apply standard solutions to specific problems that, in fact, require a specialized treatment. Our proposals are preceded by an exhaustive and rigorous study of customer needs and objectives, carried out by our professional staff.

Our Technical Office, through its mechanical and electrical departments, elaborates each project providing different solutions in terms of costs, productivity, level of efficiency, etc. Our professionalism and the guarantee of being exclusive agents and licensees for Spain of brands of the highest world level in the sector, guarantee that the final result of our work is to the complete satisfaction of our customers.

Representative Companies

ABP
CLANSMAN DYNAMICS
CYRUS
DISA
INSPECTOMATION
MAGMA
NEDERMAN
POUR-TECH
SIIF
WHEELABRATOR
YUATSUKI

Contact

Via dell'Industria, 62
36035 MARANO VICENTINO (Vicenza)
Italy

Telephone +39 0445 637629
Fax +39 0445 639057
Email info(at)euromac-srl.it

Representatives Worldwide

Press Releases & News

Downloads

Information

Euromac has served the foundry industry for more than 50 years, originally under the company name of  “CPF”.

Our speciality is the manufacture of Green Sand Moulding lines, Core Making Machines and associated Sand plant, Metal handling and treatment equipment.
Our technical office, supported by 3D model software, designs the entire lines & machineries, taking care of every detail thanks to the cooperation with customer’s technicians and with the purpose to find solutions suitable for the foundry production requirements.

In the factory in Marano Vicentino, Euromac looks after to all the production phases. The facilities is completed with high specs CNC machines & high performance workstation.
Our sales network covers most of the states all over the world, in particular Europe, Mexico, Brazil, North Africa, Russia.
Furthermore Euromac is focused on South America market where our branch facility has been built in Santa Caterina region.
Euromac America Latina carries out the manufacturing and the assembling of the same equipment produced in Italy.

Our customer reference list includes Teksid, Nissan, General Motors, Nemak, Zanardi, SCM, Augusta, Buderus, Ampo, Cimos, Kovis, Sandvik, Grainger & Worrall,  Bradken, W. Cook, WHB, Dana, Saint Gobain.

Euromac's philosophy is to pay special attention to details and the individual needs of our Customers. We believe in a flexible approach in dealing the requirements coming from our Customer because our daily engagement is giving solutions to the various applications, also of the smallest productive realities.

Contact

Daimlerstrasse 22
86368 Gersthofen
Germany

Telephone +49 821 65063-0
Fax +49 821 65063-111
Email europe(at)exone.com

Press Releases & News