B2B Portal for Technical and Commercial Foundry Management
Languages

Foundry Corporate News

04. October 2007

CONAF 2007

CONAF 2007

CONAFFoundry Congress, a forum of discussions that search the technical development of the sector, through the change of information and knowledge and also with lectures of Brazilian and foreigner experts.

CONAF 2007, Sao Paulo

Luiz Carlos Koch with Cleusa Marquez

The new ABIFA President Devanir Brichesi opens CONAF 2007

Mr. Adalberto Birrenbach de Souza Santos gets an award from Devanir Brichesi

President Devanir Brichesi and Luiz Carlos Koch with a special award

CONAF award winner, framed of Remo de Simone ( Vice President) and Devanir Brichesi (President)

The Congress Board

Pressconference with, from left: Bernd Reismüller ( Magal), Devanir Brichesi, Remo de Simone and José Aoad Raya

 

Topics

 

For further information about CONAF conference artcicles, feel free to contact us.

 

  • Application of Tenax 300 steel in pressure die casting dies – case studies

Rafael Agnelli Mesquita, Villares Metals S. A.
Celso Antonio Barbosa, Villares Metals S. A.
Paulo Haddad, Villares Metals S. A.
Paulo Marchina, Magal Indústria e Comércio LTDA
Celso Morais e Silva, Magal Indústria e Comércio LTDA

  • Boron Nitride (BN) and BN composites for foundry and casting applications 

Christiane Klöpfer, ESK Ceramics GmbH & Co. KG, Kempten, Germany

  • Can current organic binder systems cope with future requirements?

Dipl.-Ing. Amine Serghini, Huettenes-Albertus

  • Ductile iron pouring with presspourr systems

Erwin Doetsch, ABP Induction Systems GmbH, Dortmund - Germany
Fernando Orsi, ABP Induction Sistemas de Fundição Ltda., Atibaia - Brazil

  • Elaboration of alloyed and unalloyed white cast iron

Jean Chaves Araújo, Técnico da pesquisa aplicada do SENAI/CETEF. Serviço Nacional de Aprendizagem. Engenheiro Industrial Mecânico pela Universidade de Itaúna. Faculdade de Engenharia.
Denilson José do Carmo, Técnico da pesquisa aplicada do SENAI/CETEF. Serviço Nacional de Aprendizagem Industrial/Centro Tecnológico de Fundição Marcelino Corradi. Professor da Faculdade de Engenharia de Produção da Universidade de Itaúna. Mestre em metalurgia pela UFMG. Universidade Federal de Minas Gerais., Engenheiro Industrial Mecânico pela Universidade de Itaúna. Faculdade de Engenharia. Doutorando no Departamento de Metalurgia e Materiais da UFMG.
José Oscar da Silva Júnior, Técnico de laboratório do SENAI/CETEF. Serviço Nacional de Aprendizagem. Graduando em Engenharia de Produção pela Universidade de Itaúna. Faculdade de Engenharia.

  • Global casting trends & combating international competition – aluminum, ductile iron gaining in world market

Alfred Spada, American Foundry Society, Inc., Schaumburg, Illinois, U.S.A.
Chandra Rajan, Foseco Metallurgical, Inc., Cleveland, Ohio, U.S.A.

  • Implementation of casting simulation software in the foundry with a focus on fine tuning input data for the specific foundry

Lawrence E. Smiley, President, Finite Solutions, Inc., Hamilton, Ohio USA

  • Improvements at electric arc furnace form the Metso

Gilson Neves da Silva, Mestre em Eng. Metalúrgica - En. de Processos Metalúrgicos da Metso
Anderson Barbosa, Técnico de Processos da Metso
André Souza, Estagiário de Eng. de Materiais da Metso

  • Study of the influential parameters of process in the mechanical properties of gray iron using the foundry simulation

George Hamilton de Oliveira, Metallurgist Engineer, Magma Engenharia do Brasil Ltda
Reinaldo José de Oliveira, Metallurgist Technician, Magma Engenharia do Brasil Ltda
Jefferson Malavazi, Metallurgist Engineer, Senai Nadir Dias de Figueiredo School
Luiz António da Silva, Metallurgist Engineer, Senai Nadir Dias de Figueiredo School
Marcos António Togni, Metallurgist Engineer, Senai Nadir Dias de Figueiredo School
André Arakaki Alves, Metallurgist Technician, Senai Nadir Dias de Figueiredo School
Nilton Cesar Cordeiro, Metallurgist Technician, Senai Nadir Dias de Figueiredo School
Marcelo Matos da Silva, Trainee form Metallurgist Technician Course, Senai Nadir Dias de Figueiredo School
Márcio Dias Francisco da Silva, Trainee form Metallurgist Technician Course, Senai Nadir Dias de Figueiredo School

  • The use of color change refractory coating technology as a quality control tool

Lee R. Horvath, Global Marketing Manager, Metal Casting Specialties, Ashland Casting Solutions, Dublin, Ohio, USA
Flávia C. Duncan, Materials Research Scientist, Metal Casting Specialties, Ashland Casting Solutions, Dublin, Ohio, USA

  • The use of copper in ductile irons

Adalberto Bierrenbach de Souza Santos, Engenheiro Metalurgista, Mestre em Engenharia Metalúrgica e Doutor em Engenharia. Diretor da Metal Consult Ltda., Joinville ( SC ).

 

More Topics in Portuguese language available. For the full list contact Foundry-Planet.com

Related Articles

Youtube Linkedin Xing