B2B Portal for Technical and Commercial Foundry Management
Languages

Composite casting

20. February 2014

P.S. Auto Grinding Ltd.: Third Thing that is Certain in Life

It is often said that two things are certain in life.1. Death2. TaxesIt is becoming apparent in Foundries that a third thing is almost certain.3. Bottlenecks in Grinding Departments What is the Reason for This ? There are too...

19. February 2014

Colosio Srl: A Worldwide Manufacturer of Die Casting Machines

Colosio Srl, a worldwide known diecasting machines manufacturer, is pleased to present the new corporate video.Shown in preview in EUROGUSS 2014 in Nurnberg, the video has already wowed Customers and potential Customers.The video...

17. February 2014

Morgan Thermal Ceramics offers Cerox® fired refractory shapes and engineering expertise for producing clean and contaminant-free metals

Morgan Thermal Ceramics announces the availability of Cerox® fired refractory shapes, offered in a range of material compositions, including many specifically used for the manufacture of rotating and non-rotating airplane...

06. February 2014

ESI releases the latest version of VA One; the complete vibro-acoustic simulation solution

A full-frequency solution offering seamless connectivity between various vibro-acoustic modeling methodsESI Group, pioneer and worldleading solution provider in Virtual Prototyping for manufacturing industries, announces the...

26. January 2014

MAC GmbH | Consulting and Engineering is proud to present the new offices

Since 1st of January 2014 MAC GmbH has moved to the new office in Wiesendangen. Also MAC Deutschland GmbH has left Radebeul and is now located in Zwenkau.General Manager Dieter Jurczik: “Because of certain changes at each site...

22. January 2014

General Chemical: Mudding Compounds

General Chemical is a pioneer and worldwide supplier in supplying water based & solvent based fast drying temporary protective coatings.  We have been a proven worldwide supplier for over 25 years for various substrates...

21. January 2014

Flow Science Announces Its 14th FLOW-3D European Users Conference

Flow Science, Inc. has announced that it will hold its 14th annual FLOW-3D European Users Conference on June 17-18, 2014 in Vienna, Austria at the NH Danube. Advanced training for the use of FLOW-3D in the water &...

11. December 2013

ESI releases a new version of ProCAST, the leading software solution for casting process simulation

Reducing turnaround time by halfESI Group, pioneer and worldleading solution provider in Virtual Prototyping for manufacturing industries, announces the release of ProCAST 2013.5 along with its dedicated user environment...

10. December 2013

Hot and heavy: Konecranes manages Steel Industry challenges with intelligent lifting solutions

Lifting equipment in the steel industry is subjected to the roughest conditions, especially extremely high and variable ambient temperatures, difficult and heavy loads, as well as ever-changing and grueling operations. Konecranes...

06. December 2013

General Chemical Corp. Core Paste & Hot Shell Adhesives

General Chemical is a pioneer and worldwide supplier in supplying water based & solvent based fast drying temporary protective coatings.  We have been a proven worldwide supplier for over 25 years for various substrates...

13. November 2013

FOUNDRY SOLUTIONS & DESIGN, LLC

Foundry Solutions & Design (FS&D) meets all expectations at the recent METAL KIELCE, the Polish Foundry Exposition in Kielce, Poland.Exhibiting for the first time at the Metal Kielce in Poland, FS&D was overwhelmed...

17. October 2013

Dynamic Team at General Kinematics

RANDY SMITH, GENERAL KINEMATICS VP TECHNICAL SERVICES, RECEIVES ILLUSTRIOUS NOMINATIONThis fall, Randy Smith has been selected to receive the illustrious ‘Outstanding Alumnus Award’ in recognition of contributions to his...

27. September 2013

voxeljet AG: The perfect copy of a historic monument

It was an unusual request for the voxeljet service center: Printing 100 sand moulds at sizes of up to 1.5 cubic metres. This large order is related to the reconstruction of the historic Liebknecht portal - a very unusual project,...

24. September 2013

An X-ray legend heads into the third dimension – “Y.MU2000 goes CT”

With over 450 systems in use on the market, Y.MU2000 is the most ‘tried-and-true’ and most popular universal radioscopic inspection system worldwide. Recently brought to technical state-of-the-art status via a digital flat-panel...

23. August 2013

J.D. Neuhaus: Air Hoists handle difficult Foundry Conditions

Foundry operating conditions can involve intense heat and noise combined with dust and chemically- laden atmospheres, resulting in some of the most difficult and potentially dangerous working environments. Add to this the need to...

14. August 2013

RÖSLER „RetroFit“ increases productivity and operational efficiency

Rutten Long Life blast turbines combine better performance and higherTo stay competitive in today’s global markets companies must constantly strive for further optimization of their manufacturing operations. The Retrofitting of...

12. August 2013

Simply read the Result with the SPECTROTEST App

Increased comfort and ergonomicsSPECTRO APP free for Apple iPhone, iPod touch and iPad Working with the SPECTROTEST mobile metal analyzer has just gotten easier. SPECTRO Analytical Instruments, a unit of AMETEK, Inc., now offers...

11. August 2013

Otto Junker: New stopper actuator for pouring furnaces

The production of high-grade castings on automated moulding lines poses high demands regarding dosed filling of the sand moulds. The use of pressurized pouring furnaces with stopper and pouring control system, much mlike...

09. August 2013

Around the world in 8 minutes with JDN!

It’s finally finished! After many months in development and production, J.D. Neuhaus is now ready to launch its latest masterpiece. Not a hoist or a crane system this time, but a new film about our company. Shooting took place in...

04. August 2013

Improve your castings-FCRI ceramic foam filer

FCRI Ceramic Foam Filters offer the best way to eliminate inclusions, foreign materials that are a major source of quality problems in casting.  and help you meet ever increasing demands for quality.Get rid of...

03. August 2013

Morgan MMS: Executive Interview with Peter Viens, President, Molten Metal Systems on Improving Customer Service in the Melting Industry

What had been the traditional role of customer service in the melting industry in previous years?In the past, suppliers viewed responsiveness and developing friendly relationships with foundry managers as the key ingredient in...

29. July 2013

Shipyard handling solutions from J.D. NEUHAUS

JDN Profi 100 Ti air hoist, part a series of hoists offering lift capacities from 250kg up to 100 tonnes. With nearly 270 years of hoisting technology experience, the J D Neuhaus company have pioneered many substantial...

08. July 2013

Watts Inaugurates FS&D Designed Foundry

Watts Water Technologies “cut the ribbon” on its new Franklin, NH foundry where it will exclusively cast lead free products.The plant, inaugurated by New Hampshire Governor Maggie Hassan and company President and CEO David...

25. June 2013

Hexagon Metrology Announces PC-DMIS Touch

All New User Interface Leverages Multi-Touch Gestures to Enhance the User Experience

25. June 2013

Trimet: Seven millionth ton of aluminium produced in the foundry

At the Essen plant of TRIMET Aluminium SE, the seven millionth ton of aluminium was produced in the past week since the foundry's foundation. The jubilee aluminium was delivered in the form of highly specialised slabs to the...

24. June 2013

ProTEC Marketing: Economic Appraisals and Strategic Planning 2013

Expert Survey in the Steel and Foundry IndustryTechnology and cost management as well as international competitiveness - these are the challenges of the highest priority for strategic objectives for the companies in the steel and...

17. June 2013

FLOW-3D/MP 5.0 Released

Flow Science, Inc. announces the availability of a new release of FLOW-3D/MP, the distributed memory version of its flagship CFD software, FLOW-3D. FLOW-3D/MP v5.0 enables engineers to take advantage of the scaling potential of...

12. June 2013

Foundry Solutions & Design: A Leading Source of Foundry Engineering

Foundry Solutions & Design, a major North American provider of foundry consulting, engineering, and project management, is currently working with Ellwood Engineered Castings, a leading supplier of gray and ductile iron...

17. May 2013

Speakers Announced for the 13th FLOW-3D European Users Conference

Flow Science announces the speakers for its 13th annual FLOW-3D European Users Conference, to be held on June 13-14 at the Hotel Petit Palace Savoy Alfonso XII in Madrid, Spain. Users throughout Europe, from both the commercial...

16. May 2013

Co-operation agreement concluded with CAN-ENG Furnaces International Ltd.

The co-operative agreement between OTTO JUNKER GmbH and CAN-ENG Furnaces International Limited has laid the groundwork for a further improved, more efficient customer service and advisory support.Thanks to their complimentary...

13. May 2013

AMV Soluciones introduces its optimization solutions in the Metal Casting Conference in South Africa

Unstoppable in its expansion, the software AMV ALEA was the main character in the conference conducted by Alberto Montenegro, Technical Director of AMV Soluciones.In front of more than a hundred members of the foundry sector he...

10. April 2013

FILL: Transparency creates an advantage

Life Cycle Costing Calculator enables an overview of a product or system's lifecycle from a financial perspective.The Life Cycle Costing Calculator (LCCC) provides operators and manufacturers with maximum transparency in...

04. April 2013

Flow Science Announces Its 2013 FLOW-3D World Users Conference

Flow Science announced today that its 2013 FLOW-3D World Users Conference will be held September 19-20, 2013 at the Allerton Hotel in Chicago, IL. The conference is open to FLOW-3D, FLOW-3D Cast, FLOW-3D/MP and FLOW-3D ThermoSET...

29. March 2013

Institute Cast Metals Engineers: Casting Class of 2013

The first foundry graduates in the UK for 20 years have been honoured in a move described by skills body Semta as a major development in the resurgence of UK industry.Will Garret and Chris Jay of Union Electric Steel in Gateshead...

23. January 2013

46th Census of World Casting Production

Available as a download.Source: Modern Casting Staff ReportClick here for (PDF) View / Download

29. October 2012

MorganMMS Signs Exclusive Agreement with Molten Metal Products for Global Furnace Production

MMMS will share manufacturing technology for worldwide furnace salesMorgan Molten Metal Systems (MMMS), the world’s leading designer and producer of crucibles for the non-ferrous metals industry, has signed an exclusive license...

26. October 2009

One Step Closer to the No-Iron Car

WHEN the Boeing 787 airliner goes into commercial service next year, travelers will be transported on wings and fuselages made of advanced composite plastics.  This raises a logical question: if modern plastics are sturdy...

Displaying results 51 to 88 out of 88
<< First < Previous 1-50 51-88 Next > Last >>
Youtube Linkedin Xing