Formstoff Weiser Laboratory & Consulting

Rüdentaler Straße 17a, 74736 Hardheim, Germany

Information

Through experience good!

I came into contact with foundry technology 40 years ago through my education and have discovered it as a passion over the years.

I would like to bring my experience to your company in a goal-oriented way and thus make an important contribution to your company’s success.

Quality guarantee

Good molding material quality is a guarantee for good castings. Monitoring and analysis of the molding material reduces scrap and reworking of the castings.

A further aim is to use raw materials in a targeted manner through monitoring and thus to conserve resources.

Many years of experience in foundry technology have shown that two different foundries, no matter how similar, cannot be compared with each other. Each foundry is unique in its production requirements. As a result, each foundry requires individual machine technology and corresponding input materials tailored to its specific requirements. For this reason, it is mandatory that each foundry develops its optimums for sand preparation by documenting and evaluating the daily situation and conducting, evaluating and, if necessary, implementing improvement tests.

This should be the motto of a foundry from an economic point of view, for the quality of the products and in terms of machine technology and resource conservation.

I would be happy to support you with my many years of experience in molding technology and work with you to optimize molding material quality.

“What I perform – I perform for you”

Produkte

Analyses on …

Molding marterial / Molding sand
Technological properties

Bulk density, water content, bulk density, compactibility, gas permeability, compressive strength, shear strength, splitting strength, wet tensile strength, share of particles >2.8 mm

Composition/ Contents

Total loss on ignition, loss on ignition > 0.02 mm, grain content < 0.02mm (clay wash test), methylene blue value (active clay content), sieve analysis including grain size characteristics, microscopic assessment, volatile components.

Analyses on …

Silica sand

Loss on ignition, grain content < 0.02mm (clay wash test), sieve analysis including grain size characteristics, microscopic assessment

Bentonite/ Binder

Water content, methylene blue value, loss on ignition, grain content < 0.02mm (clay wash test), swelling volume, thermal resistance (300°C, 400 °C, 500 °C)

Regenerated material/ Old sand

Loss on ignition, grain content < 0.02mm (clay wash test), sieve analysis including grain size characteristics, microscopic assessment

Dust

Water content, methylene blue value, loss on ignition, grain content < 0.02mm (clay wash test), sieve analysis including grain size characteristics

Analyses in standing order

We offer you more cost-effective molding material tests on a standing order basis for uniformity control. In a framework contract, with you fixed periods (monthly or weekly) and scope, investigations are carried out, which are specially adapted to your operational needs. The scope of testing includes an analysis report, statistical processing of the analysis results and written information about deviations and measures.

Ask us.
We have the right solution also for you.

Kontakt

Rüdentaler Straße 17a
74736 Hardheim
Germany

Telefon + 49 (0) 6283 44 999 88

Zurück zur Übersicht
Socials