528 Avenue de Savoie
BP3 - 38570 Le Cheylas
Telephone +33 4 76 92 92 20
Fax +33 4 76 92 92 69
Winoa is an international market-leading innovator of steel abrasives products and services, renowned all over the world under the brand "W Abrasives". Steel abrasives are used in the metal industry for cleaning, surface preparing and fatigue resistance enhancing, but also in the stone industry to cut granite blocks into thin slabs. It plays a determining role in the production processes of numerous activities, including construction, transport, equipment goods, iron & steel and energy industries. Since 1961 Winoa continues to contribute significantly and bring innovation in products, services and technologies dedicated to these market areas. Winoa teams up with its customers everywhere in the world, offering economical, ecological and easy to use solutions to transform their products. Always attentive to its customers, Winoa pays particular attention to the quality and performance of its products & services and relies on the professionalism of its teams.
Headquartered in Le Cheylas, France, Winoa employs a diverse and highly skilled global workforce exceeding 1,000 employees in 28 countries on 4 continents, 6 Technical & Training Centers, and a team of 25 technical experts.
As a world leader in its market, W Abrasives provides unrivaled expertise in the products, services and technologies dedicated to cleaning. Desanding and descaling works are major applications for which W Abrasives contributes its added value.
High-productivity grit for desanding operations
High Performance Grit is a steel grit specially designed to improve shot blasting performance in foundries and forges. It works faster and last longer. Its capacity for removing and cleaning sands, resins or scale is unequalled.
Premium product for descaling operations in wheel-blasting
STAINIUM® is specially developed for descaling applications when little roughness is required at the end of the process. Especially available in fine grades, STAINIUM® provides a more stable operating mix.
Premium mix for low machine wear in desanding operations
HYBRID SHOT was developed specifically to address new demands for desanding in foundries and descaling in forges and wire drawing plants. By reducing machine wear it helps to reduce maintenance costs while at the same time achieving remarkable performance in terms of cleaning.
STELUX® is a stainless steel abrasive media
STELUX® is used for surface cleaning, preparation and finishing of non-ferrous metals, stainless steel castings or forgings, as well as granite and marble. STELUX® is provided in two different grades: C (Chromium stainless steel shot) and CN (Chromium - Nickel stainless steel shot).
ROUND STEEL SHOT
Quenched and tempered, it is a spherical product of hypereutectoid steel (C ≥ 0,85%). Perfectly controlled heat treatments provide it with optimum resilience and resistance to fatigue.
This type of shot is used in all applications where the desired effect is for mass and maximum bounce as well as for shot peening.
ANGULAR STEEL GRIT
A cast steel angular grit is produced by crushing specially heat treated oversize shot pellets. It is utilised for blast cleaning or surface preparation.
GP STEEL GRIT
Quenched and tempered, angular when new, this grit rapidly rounds off in use and is particularly suited to descaling applications.
GL STEEL GRIT
Quenched and tempered, although harder than GP steel grit, GL also loses its sharp edges during shot blasting and is particularly suited to descaling and surface preparation applications.
GH STEEL GRIT
Quenched with maximum hardness, GH always remains angular in its operating mix. These abrasives are particularly effective in surface treatment processes and produce a uniform, etched finish.
For use mainly with compressed air equipment.
WGR STEEL GRITS
Steel grits WGR are special products used for the cutting of hard stone products such as granite. Ask for our commercial-technical teams.
For further detailed product information, services and technology, please visit: