Foundry Corporate News Topic Pressure Die Casting

German Toolmaker Krämer+Grebe and Halberg Guss helping General Motors to shine on the Detroit Motorshow 2018

Market leader General Motors relies on the experience and know-how of the German toolmaker Krämer+Grebe as well as the foundry company Halberg Guss for the engine block production of the Sierra Duramax 2500HD.

Reading time: min

Last month was once again time to shine for the stars of the car industry at the NAIAS 2018 in Detroit. While one would assume that by now the overall trend at a fair as important as this one would focus on the movement towards electric cars, the hype about full-size-trucks continues momentously. So, no surprise that the main producers Ford, Chevrolet, and GMC showcased their innovative truck highlights and newcomers – with no electric super-truck yet to come. Instead, they surprised with diesel engines like the GMC V8 Duramax - one of the engine highlights for truck lovers and convincing with 450 HP, 6.6 L and a towing capacity up to 10 tons in form of the Sierra Duramax 2500HD.

While this engine is of great interest, being the growling heart of the full-size pickup, only few people know more about it than just the performing hard facts. Still, there is always a beginning to every story, and the production story of the V8 Duramax begins in Biedenkopf-Wallau, Germany, in the engineering department of Krämer+Grebe. The high-tech toolmaker is renowned in the industry for their longtime know-how and the resulting high quality. 

Developing an economic and sustainable core package concept
“Besides the fact that we’re talking about a powerful V8 engine, the main issues in the production of the casting tool for the V8 Duramax were lightweight design, sand reduction, suitability for mass production and automation, process reliability, and last but not least maintainability.” says Katrin Grebe, CEO at Krämer+Grebe. For the V8 Duramax, they made it their task and challenge to develop a core package concept for the most economic casting process, while keeping the focus on designing it more cost-efficiently by reducing the amount of sand used in the process of core shooting. Especially as the costs of recycling contaminated sand are high, and the waste of a natural resource is simply not sustainable. The goal was to reduce a significant amount of sand through realization of the shell thickness for the cores of approx. 15-25mm., which eventually led to the result of an incredible reduction of 40%, around 70kg of sand, compared to an American toolshop, for every single casted engine.

Mainly due to down-scaling the use of sand and therefore the cost in production, Krämer+Grebe made it economically interesting for Halberg Guss and GM to manufacture the engines in Germany. This is where the story of the V8 Duramax continues; at Halberg Guss, one of Krämer+Grebe long trusted partners and the market & technology leader when it comes to the production of engine blocks.

Both companies a perfect fit
According to Juergen Schwan, Sales Director at the Saarland casting company: “It was the perfect mix of costs, quality and timing” that made both companies the perfect fit for the V8 Duramax project. With a developing time of 4-5 months only, Krämer+Grebe could easily best its competition, not to mention its quality and competence during prototyping and production. Same accounts for Halberg Guss and what they produce in precise coordination is the heart of the engine – a full cast part weighing 145kg – and produced with a capacity and logistics of some 100,000 pieces per year.

In order to complete the production of the full-size pickup, the story continues from the engine assembly at Duramax to the car assembly of GMC in Detroit, USA - where the engine blocks get their horse power, and the American dream car its face. And as long as the trend of electronic cars doesn’t rule the American market, the German casting companies will remain the first choice in qualitative casting tools and engine block production.

<link https: de news firmen-news detroit-motorshow-2018-der-hessische-werkzeugbauer-kraemer-grebe-und-die-saarlaendische-halberg-guss-haben-massgeblich-am-erfolg-von-gmc-mitgewirkt external-link-new-window internal link in current>Auch auf Deutsch verfügbar  

Company Info


Ludwig-Grebe-Straße 5
35216 Biedenkopf-Wallau

Telephone: +49 6461-80080