+ a b c d e f g h i j k l m n o p q r s t v w x y z

F.LLI MAZZON S.p.A.

Via Vicenza, 72, 36015 Schio - VI , ITALY

Contact

Via Vicenza, 72
36015 Schio - VI
ITALY

Telephone +39.0.445.678000 – Ext. 678060
Fax +39.0.445.678001
Email sales(at)mazzon.eu

Information

Since 1962 F.lli Mazzon S.p.A. has been a reliable partner in more than 30 countries as for no-bake systems (furanic, phenolic, alkyd and polyurethane), cold-box and hot-box binders, insulating refractory coatings in alcohol and water, additives, glues, releasing agents and many other chemicals.

F.lli Mazzon has been operating since 1997 with a certified quality system based on UNI EN ISO 9001:2008 rules. In 2012 our safety system was certified according to OHSAS 18001:2007 rules and in 2015 the company implemented  ISO 14001 environmental certification.

F.lli Mazzon has recently been equipped with brand new chemical reactors: the company is now able to produce higher quality resins at competitive prices in shorter times. Continuous improvement of plants and equipment, such as our huge investment for the reactor, are constantly planned in order to cope with a competitive and demanding global market.

The CLP Regulation (EC) n. 1272/2008 entered into force affecting foundry binders too. F.lli Mazzon S.p.A. is already facing this change since we can already supply Cold Box resins (Leganol HD and HI series) and No Bake resins (Ecofur 5000 and 6000 series) with a low formaldehyde content: < 0,1%, which means they are exempt from labelling rules, and a free furfuryl alcohol content < 40%, which is to be considered as not toxic
 
MANUFACTURING PROGRAM:
CHEMICALS FOR FOUNDRIES for iron - steel - non ferrous castings
 
BINDERS FOR CORES & MOULDS
RESINS for COLD BOX process curing with amines
FURAN RESINS
FURAN-PHENOLIC and PHENOLIC RESINS
ACID HARDENERS
ALKALINE PHENOLIC RESINS curing with esters / methylformiate / CO2
PHENOLIC-URETHANE BINDERS
POLYOL-URETHANE BINDERS
ALKYD-URETHANE BINDERS
SODIUM-SILICATE based binders curing with CO2 / esters
 
REFRACTORY COATINGS
ALCOHOL and WATER BASED COATINGS for cores and moulds
COATINGS for cores in automotive industry
COATINGS for polystyrene patterns (full mould and lost foam process)
COATINGS for cylinders / rolls centrifugal castings
 
AUXILIARIES
ALCOHOLIC THINNERS for refractory coatings
GLUES and FILLERS
MOULD SEALS  - 4,5 mm to 20 mm
RELEASE AGENTS
EXOTHERMIC POWDERS
ANTIVEINING ADDITIVES
STRENGTHENING PRIMERS
SCREW CLEANERS
PAINTS for wooden patterns

FANUC Robotics Deutschland GmbH

Bernhäuser Straße 36 , 73765 Neuhausen a. d. F., Germany

Contact

Bernhäuser Straße 36
73765 Neuhausen a. d. F.
Germany

Telephone +49 7158 9873 - 0
Fax +49 7158 9873 - 100
Email sales(at)fanucrobotics.de

Press Releases & News

General Motors Honors FANUC as Inaugural Winner of Coveted Supplier Innovation Award
FANUC was named a GM Innovation Award winner during General Motors 24th annual S...

FARO Europe GmbH & Co. KG

Lingwiesenstr. 11/2, 70825 Korntal-Münchingen, Germany

Contact

Lingwiesenstr. 11/2
70825 Korntal-Münchingen
Germany

Telephone +49 7150 9797-0
Fax +49 7150 9797 44

FATA Aluminum LLC.

2333 E. Walton Blvd., MI 48326 Auburn Hills, United States

Contact

2333 E. Walton Blvd.
MI 48326 Auburn Hills
United States

Telephone +12487247669
Fax +1248-659-1526
Email info(at)fataaluminum.com

Press Releases & News

Foundry of the Future: Five questions for Marco Meneguzzo, the new General Manager at FATA Aluminum
Seven months after Marco Meneguzzo was chosen to lead FATA Group, he was given f...
FATA AUTOMATION AND FATA ALUMINUM CONTINUE TO GROW IN CONTINENTAL NORTH AMERICA
FATA Automation and FATA Aluminum have opened a new production facility in Aubur...
FATA ALUMINUM IS OPENING A SALES OFFICE IN FRANCE
As of April 2017, Fata Aluminum will open a sales and customer assistance office...

Information

FATA Aluminum

World Headquarter: Auburn Hills, Michigan, U.S.A.

Among our customers, FATA Aluminum has 60 years of history of providing service to General Motors, Mercedes-Benz, Daimler Chrysler, Teksid, Nemak, and Volks Wagen.

FATA Aluminum has a strong background in foundry automation and process control. Serving the modern industry means exceeding customers expectations a constant attention is paid to each product from design to manufacturing, from commissioning to after sale service. FATA Aluminum is the number one leader in developing and manufacturing the pistons machinery.

The core business of FATA Aluminum is providing customers with aluminum gravity castings, sand regeneration plants, lost foam plants, core making machines, piston plants, and foundry tooling. FATA Aluminum is a global company that can also be located in Mexico, Italy, and China. Focused on improving the customer total value, with its strong industrial approach FATA Aluminum is moving forward to the global market, ready to take advantage of new opportunities.

Inhouse Contact
Giorgio Donini - gdonini(at)fataaluminum.com
Martin Mattia - mmattia(at)fatainc.com

FCRI & Jin Gang Group

No. 18, Liuyuan Road, Shiwan, 528031 Foshan, China

Contact

No. 18, Liuyuan Road, Shiwan
528031 Foshan
China

FerroČrtalič d.o.o.

Sela pri Dolenjskih Toplicah 47,, 8350 DOLENJSKE TOPLICE, Slovenia

Contact

Sela pri Dolenjskih Toplicah 47,
8350 DOLENJSKE TOPLICE
Slovenia

Press Releases & News

FerroČrtalič International- 50 years of excelence
A well-known Slovenian company, FerroČrtalič has been a synonym for modern and...

FerroPem

517 Avenue de la Boisse, 73000 Chambery, France

Contact

517 Avenue de la Boisse
73000 Chambery
France

Fill Gesellschaft mbH

Fillstraße 1, 4942 Gurten, Austria

Contact

Fillstraße 1
4942 Gurten
Austria

Telephone +43 (0)7757/7010-0
Fax +43 (0)7757/7010-275
Email info(at)fill.co.at

Press Releases & News

Österreichische Spitzentechnologie punktet mit Präzision und Wirtschaftlichkeit
Namhafte Automobilhersteller setzen auf die Technologie von Fill Maschinenbau. D...
Austrian leading-edge technology scores highly with precision and cost-effectiveness
Renowned automotive manufacturers rely on the technology from Fill Machine Engin...
FILL - Vom Zwei-Mann-Betrieb zum Global Player
Mit Pioniergeist und Vision: 50 Jahre Fill Maschinenbau – eine österreichisch...

Information

Company Profile

neubau.jpg

Wer die beste Lösung sucht, entwickelt gemeinsam mit Fill seine Zukunft.

Dieser Anspruch wird seit 1966 gelebt. Dadurch entwickelte sich Fill im Laufe der Jahre zu einem der weltweit führenden Maschinen- und Anlagenbauer.

"Synergien aus den verschiedenen Produktionszweigen zu erkennen und sinnvoll zu nutzen, darin liegt unsere Stärke."
Andreas Fill


Products


alu_beta.jpg


zerspanung_4.jpg

kunststoff_beta.jpg

Das Steuer fest im Griff. Auf Überholkurs mit Verantwortung. Hohe Ansprüche in der Kunststoffverarbeitung fordern Lösungen von Fill. Mit Fill als Partner heißt das weltweite Spitzentechnologie für Premiumqualität.


_skisnow_5_kopie.jpg

Fill komponiert die international besten Produktionslösungen für die Be- und Verarbeitung von Compositeteilen.
Von der Faser bis zum fertigen Bauteil - Alles aus einer Hand.


holz_beta.jpg

Den Produktionsalltag immer vor Augen liefert Fill Maschinen und Anlagen, die auf rationelle Weise Produktivität und Qualität des Produktionsprozesses erhöhen.


sondermaschinen_6.jpg

Dort wo Standardmaschinen an ihre Grenzen stoßen. Wo die hohen Ansprüche des Kunden nur durch individuelle Lösungen erfüllt werden können. Dort ist Fill zu Hause - weltweit.


service.jpg

KOMPETENT, FLEXIBEL, SCHNELL
Das Team des Kompetenz Centers Service schafft gemeinsam mit Ihnen die besten Lösungen zur nachhaltigen Nutzung von Anlagen und Maschinen.


Das Leistungsangebot umfasst:
UNTERSTÜTZUNG // WARTUNG // REPARATUREN // ANLAGENMODIFIKATIONEN // ERSATZTEILE // PROZESSOPTIMIERUNG


Categories

  • Casting and diecasting machines
  • Discharging, decoring, cleaning and finishing
  • Measuring and testing technology, quality control, laboratory equipment
 

Finite Solutions Inc

4769 Highland Park Dr , 53086-9441 Slinger, WI , United States

Contact

4769 Highland Park Dr
53086-9441 Slinger, WI
United States

Fochem International (Pty) Ltd.

P O Box 11610, 1457 Randhard , South Africa

Contact

P O Box 11610
1457 Randhard
South Africa

Telephone 011 903 9720
Fax 011 903 9730
Email info(at)fochem-international.com

Press Releases & News

GIFA Report Fochem International
Fochem International would like to thank all our visitors who came to see us at ...
Fochem International – Your Chemical Expert!
Fochem International offers application-specific products for many different p...
FOCHEM INTERNATIONAL YOUR CHEMICAL EXPERT
Fochem International offers application-specific products for many different pro...

Information

About us

Fochem International has its roots in Germany and has built its foundation on German Technology.

During the early 1970’s the first South African air-micronization plant for the manufacture of colloidal graphite was established south of Johannesburg. This enabled South Africa’s automotive- and defence industry to become independent of international supplies.

Since then, thousands of tons of specialized lubricants have been produced annually for the local market, as well as for global exports.

Today Fochem International is proud of having one of the most advanced technologically and environmentally production facilities of its kinds in the world. Certain production stations are fully automatic and are operated free of human supervision. Our manufacturing process guarantees a consistently high quality end product.

Our unique technical capability, extensive experience in product development, growing reputation for reliability and highly competitive pricing, sets us apart as a preferred supplier on an international level.

It is our obligation and strength to be innovative in helping our customers to solve their particular technical problems. We constantly develop new technologies and optimize our production processes.

Based on this flexibility we can offer a large variety of specialized products.


Products

Our products are manufactured from very basic raw materials as well as high-tech products in our processing plant, whilst our competitors just mix together semi-finished products.
We are able to offer our customers tailor-made products. Try us, you will be pleasantly surprised!


Range of Products:

  • High pressure die-casting lubricants and release agents
  • Coatings for gravity and low pressure die-casting
  • Forging compounds
  • Extrusion compounds
  • Micronized graphites
  • Coatings for primary refineries, electronics industry,  
      high tension cables and many other industries
  • Specialized tribo-chemical products

 

Die-Casting

Water-Based Products

Product

Casting

Properties

Isolat-TT 77 (10)

Isolat-TT 77 (20)

Isolat-TT 77 (40)

Aluminium

Magnesium

Zinc

This product does not contain wax or silicone. Therefore no build-up in cavities or on die-frame, vents remain clean, excellent release, surfaces free from flow- marks.

Isolat-SX (20)

Isolat-SX (40)

Aluminium

Release agent for extremely thick-walled and cracked forms.

Isolat-WL (20)

Isolat-WL (40)

Aluminium

Magnesium

Zinc

Special release agent with instant film forming ability;
exceptionally good die release;
very economical product.

Isolat-2020 (20)

Isolat-2020 (40)

Aluminium

pure siloxane release agent (does not contain wax)

Extremely shiny surfaces, no build-up, clean vents and die-frame are obtained.

Graphitex-37

Aluminium

Grraphite-based, "dry" release agent for SSM;

Gas porosity emanating from die release agent is eliminated.

Graphitex-122

Copper

Colloidal graphite-based product.



Oil-Based Products

The products Isolat-N and Isolat-NG are being used alone used or in conjunction with water-based release agent in automatic multiple-stage spray systems.
This improves the tool life by reducing the chilling effect of the water. Oil-based products are generally preferred on very hot dies.

Product

Casting Alloy

Composition

Isolat-N

Aluminium

Clear oil with additives

Isolat-NG

Aluminium

Oil containing colloidal graphite and other pigments

Special Solvent No.1

Zinc

runny oil out of the gasification

Isolat-ZN 90

Zinc

Clear, very thin oil (synthetic)

Isolat-MG 109

Magnesium

Zinc

Synthetic oil with soild (white) lubricants



Products in Paste form

Product

Casting Alloy

Composition

Isolat-TM 201

Aluminium

Magnesium

Aluminium pigmented grease with ceramic bonding agent

Isolat-P 22

Zinc

Aluminium

Magnesium

Transparent - white paste

Trewa Anti-soldering grease

Aluminium

Magnesium

Anti-welding grease to form "patins" on
new dies.



Plunger Lubricants

Oil-Based Products

Product

Type

Appearance

Application

Isolat-108 SP

thin graphite oil

black

Spray

Isolat-208 SP

thick graphite oil

black

drip

Isolat-318 SP

graphite grease

black

manual

Isolat-128 PP

light ester oil

clear

spray

Isolat-218 MP

heavy mineral oil

clear

drip

Isolat-228 PP

heavy ester oil

clear

drip

Isolat-TM 201

aluminium grease

aluminium colour

manual



Beads

Our beads consist of high melting point waxes which are non-tacky, odorless and do not form any carbon built up inside of the shot sleeve. They are anti-static, free-flowing and can be used in any type of dispensers.


Soild Plunger- and Sleeve lubricant


Product

Type

Available sizes

Appearance

Shape

Isolat 80 G

graphite wax

(graphite content 15%)

fine dust

0.3 - 0.5 mm

0.5 - 1.0 mm

1.0 - 1.6 mm

1.6 - 2.0 mm

black

spherically round

Isolat 80 G

graphite wax

(graphite content 15%)

2.0 - 3.0 mm

black

non-spherically round

Isolat 80 WS

white wax

fine dust

0.3 - 0.5 mm

0.5 - 1.0 mm

1.0 - 1.6 mm

1.6 - 2.0 mm

white

spherically round



Speciality Products

Product

Type

Appearance

Field of Application

Isolat-CU Paste

Copper-PTFE-paste

copper

Injector lubrication,
Assembly lubricant

Isolat-MBO

lubricating grease

grey

All moving parts of die-casting machine

Minex-Impra M-07

white

white

Refractory die-coating

Supra Coate-Paste

paste

white

Ladle coating

Supra Coat-aqueous

aqueous liquid

white liquid

Ladle coating

Supra Coate-Powder

Powder

white beads

Ladle coating

Antibact

liquid

brown

Protection of aqueous systems agianst bacteria

Marine-Grease

grease

yellow

Corrosion protection grease (die assembly)

Rexal-W 71

oily liquid

brown

Rust protection agent



Forging

Water-Based Products


Product

Forged
Metal

Properties

Graphitex CR-33

Steel

Copper

General purpose graphite-based forging compound containing smelt-glasses and explusion agents.


Application
All forgings including crankshafts.

Graphitex 119

Steel

Similar to Graphitex CR33, only in more concentrated form and with more powerful expulsion agents.


Application
Speciality product for deep cavity and intricate forgings e.g. twisted crankshafts with counterweights.

Graphitex CR-7

Steel

Copper

Aluminium

Titanium

Ready for use forging compound based on sub-micron colloidal graphite does not settle out.


Recommended Applications
High precision forgings, demanding exceptionally accurate surface finish and maximum extended service life of forging die, e.g. gear forgings, titanium turbine blades, and medical components.

Graphitex 195

Steel

Copper

Forging compound based on macro-colloidal graphite; very economical product.

Minex 234

Steel

Copper
Aluminium

Titanium

Special Alloys

Odorless liquid which is free from graphite and other pigments. This product is able to substitute, with some exceptions, graphite-based products.


Application
All closed die forgings on ammers and presses of low to medium complexity. Highly accurate forgings can be produced.

Minex 179

Aluminium

Titanium

White, aqueous forging compound.



Oil-Based Products

Product

Forged
Metal

Properties

Rexal S 99

Steel

Copper

Viscous oil laded with high purity graphite of colloidal fineness, general-purpose product.

Rexal S 110

Steel

Aluminium

Copper

Thin dipersion of colloidal graphite in low viscosity mineral oil.

Application by spray.

Rexal Hi-Ex

Steel

Semi liquid product heavily loaded with graphite and exlosion agents.


Application
Bottling operation of production of hollow forgings.

 

Powder Products

Product

Forged
Metal

Properties

Graphine Powder „B"

Steel

Copper

Black powder incorporating explosion agents and smelt glass.


Application
Lubricating compound for the manufacture of hollow forgings of alloy steels.

Graphine Powder „LSB"

Steel

Aluminium

Surface hardening- and lubricating compound for special bottling- and extrusion operations of high alloy steels;

also suitable for aluminium forgings.



Extrusion

Coatings for the production of
pipes and profiles out of non-iron metals

Product

Description

Application

to be
applied as

Metal

Isolat 318 SP

Highly concentrated
Graphite Paste
(manual)

Extrusion of hollow profiles

Profile-Extrusion

Mould

Extrustion lubricant


Coating for pressing plate

Coating of the mould

Aluminium

Copper

Brass

Isolat 108 SP

Thin
Graphite oil
(sprayable)

Hollow Profile

Extrusion

Profile Extrusion
Mould

Extrusion lubricant

Coating for pressing plate

Coating df the mould

Aluminium

Copper

Brass

Rexal SP Paste

Soft
Graphite wax
(manual)

Profile Extrusion

Coating for
pressing plate

Aluminium

Rexal A 20

Graphite dispersion
in Ethylalcohol
(sprayable)

Profile Extrusion

Coating of raw metal

Aluminium

Graphitex 111

Graphite dispersion
in water
(sprayable)

Mould

Coating of the mould

Aluminium

Copper

Brass

Rexal RL 610

viscous
Paraffin polymer with polar additives

Pipe Extrusion
(raw Extrusion)

Lubrication of the
wire frame and plug:
use for thick parts
and low extrusion
speed.

Copper

Brass

Rexal TR 42

thick
Synthetic Oil
(ash free)

Pipe Extrusion
(Medium- and Fine Extrusion)

Lubrication of the wire frame and plug at high extrusion speed:
The product will vaporize with the final annealing without any remains.

Copper

Brass

Rexal TR 42-EP

thick
Synthetic Oil with EP- additives
(ash free)

Pipe Extrusion
(Medium- and Fine Extrusion)

Wire Extrusion

Lubrication of the wire frame and plug at high extrusion speed:
Rexal TR 42-EP prohibits the welding of the extrusion tools with the aluminium wire.

Aluminium

 




  • suitable for all sizes and shapes of beads
  • the quantity of beads can simply be changed by the
      push of a button
  • the unit is small, light-weight, and of a smart design
  • extremely reliable: the unit has been tested on
      10 million applications

     

     

FOMET S.r.l.

Via Simone Martini 11, 20143 Milano, Italy

Contact

Via Simone Martini 11
20143 Milano
Italy

Telephone +39 02 817575

Press Releases & News

Giovanni Bolla, Founder of FOMET Srl
Giovanni Bolla, fondatore nel 1963 della FOMET S.r.l., Società leader internazi...
Giovanni Bolla, Founder of FOMET Srl
Giovanni Bolla, founder of&nbsp; FOMET Srl, in 1963, passed away last March 20th...
NEW POURING FURNACE DEVELOPMENTS: DUCTILE POURING AND ENERGY SAVINGS
In the field of ductile iron castings, demand is growing and FOMET has developed...

Information

FOMET is one of the world-wide leaders in the field of induction melting furnaces and leading specialist in systems for automatic pouring.

FOMET, thanks to its over 50  years experience, are leaders in the field of planning and production of induction furnaces for the most varied applications in ferrous and not ferrous metals.

FOMET’S technicians support customers through planning, manufacture, installation and start-up, supplying all of the functions necessary for the smooth hand over of the system.

FOMET installations are now more efficient and economical than ever. Thank to the dedicated studies and designs of the refractory lining, of our own manufacture, and equipping the furnaces with the most advanced control process systems, FOMET has achieved significant savings of electrical energy consumption and reduced thermal losses to the minimum.

The efficiency and reliability of our furnaces is backed up by a fast and direct technical support service, able to satisfy the entire customer’s maintenance demands and spare parts requirements. These services render FOMET a true PARTNER and extent peace of mind to our many clients.

Our range includes induction coreless furnaces for melting, holding and superheating of ferrous and non-ferrous metals.

Pouring furnaces for the precise automatic pouring of grey and alloyed irons.

DUPLEXING holding furnaces with channel induction for holding and super heating of iron alloys.

Copper alloys melting furnaces with hydraulic “tilt-pour” feature for direct casting of moulds and “shell moulds”

Non ferrous metal recovery melting units for the production of copper, brass and bronze alloy ingots.

Twin bath furnaces (melting & holding) for the production of brass castings using gravity or pressure casting processes.

Channel inductors, air cooled up to 500kW and air/water combinations for larger units.

Computerised systems for the full management of single installations as well as full integration of multiple furnace installations using dedicated FOMET software.

  • FOMET S.r.l.
  • FOMET S.r.l.
  • FOMET S.r.l.
  • FOMET S.r.l.

References

REFERENCES
FOMET produce furnaces for all, from large companies to small individual firms.
FOMET induction furnaces satisfy all productive requirements.

Some foundries being served by FOMET
Copper an Brass Foundries
Taps - Fittings _ Water Meters - Valves and others Brassware products

  • Abloy OY Odiaco Finland
  • American Standard Mexico
  • Armitage Shanks UK (Ideal Standard)
  • Artema Armatur Grupu Turkey
  • Baylan Turkey
  • Beijing Kohler China
  • Bruno Janz S.A. Portugal
  • Buhler Germany
  • Cicasa Mexico
  • Cifial Portugal
  • Comap Shd S.A. France
  • Eurobrass India
  • Favi S.A. France
  • Foresti & Suardi Italy
  • Hans Grohe GMBH & Co. Germany
  • Heikky Finland
  • Herz Armaturen Austria
  • Hikki Hela FInland
  • Ideal Standard China
  • Ideal Standard Egypt
  • Metalvex S.A. de CV Mexico (Helvex Group)
  • Ottone Meloda Spa Italy
  • Porcher SIV France (Ideal Standard)
  • Prandelli Spa Italy
  • Sheng Tai Brassware Tailandia
  • Simonfond Srl Italy
  • Sterling Brass India
  • Strambini & Boroni Spa Italy
  • T.A. Hydronics AB Sweden
  • Tebisa Spain
  • Tour & Andersson Sweden
  • Tres Spain
  • Tupai Portugal
  • Vidima AG Bulgaria
  • Voest Alpine Giesserei Austria


Grey and Ductile Iron Foundries  

  • Automotive Castings, Pumps, Compressors, Manholes, Boilers, Stoves and other Cast-Iron products


  • Akis Turchia
  • Amtek India
  • Auto Chassis International (Renault) Fonderies Le Mans France
  • Bernard Houet (Invicta Group) France
  • Besfond Italy
  • Brembo Italy & Poland
  • Centauro Italy
  • Cheminees Philippe S.A. (Godin Group) France
  • Dalli Cani Spa Italy
  • Dana de Mexico
  • Disa Denmark
  • F.O.M.M. Spa (Brembo Group) Italy
  • FASP Spa (Sertubi Group) Italy
  • F.lli Regali Spa Italy
  • Fondar Spa Italy
  • Fonderia Ghirlandina Spa Italy
  • Fonderia Giovannini Spa Italy
  • Fonderie Ariotti - Adro Italy
  • Fonderie Soliman Italy
  • Fonderie Valchienti
  • Fondmatic Spa (Caprari Group) Italy
  • Franco Montini Spa Italy
  • Gemco Engineers
  • Gkn Heman Province
  • Hydro Vacuum Poland
  • Le Creuset S.A. France
  • Lister - Petter Ltd. Great Britain
  • Michele Ratti Spa Italy
  • Parola & Luraghi Spa Italy
  • Pont a Mousson S.A: France
  • Rassini Frenos SA de CV (Brembo Group) Mexico
  • SCM Rimini Italy
  • Teksid (Fiat Group) Brasil, Poland, Mexico
  • Tisamatic International (Auburn Group) Mexico
  • Veco Fonderia Smalteria Spa Italy
  • ZML Industries Spa Italy


PHILOSOPHY
Our operating philosophy:

  • We design all our furnaces both mechanically and electrically
  • We produce all our automation software
  • We make all our own parts, following our know how
  • We test all our furnace equipment  thoroughly before dispatch
  • We invest in Research and Development aimed at developing new and more reliable furnace equipment, also in collaboration with ideas exchanged with our foundry client
  • We use only high quality components from internationally recognized suppliers


SERVICES OFFERED BY FOMET
A dynamic commercial organization is constantly at the customer's service
with active, skilled and personalized after-sale assistance

  • We provide customer service in the shortest possible time.
  • We provide a technology consultation service.
  • We provide customer training, either at FOMET or on the customer's site.
  • We arrange technical meetings to ensure that customers are kept fully up-to-date.
  • We operate a parts' replacement service.
  • We offer plc internet connection to our technical centre, for on-line assistance and monitoring.
  • Service and maintenance  


FOMET, thanks to knowledge gained in over 50 years of close collaboration with its customers can claim to have some of the most experienced furnace technicians, anywhere. As a result of this deep ‘know-how’ FOMET quickly react and are able to make available to its foundry partners, the best, most efficient and economic way to meet  their various production and technical needs.

Fomet Srl
Via Simone detto Memmi Martini, 11
20143 Milano (MI) Italy
Tel. +39 02 817575
Fax. +39 02 8135015
E-mail: info@fomet.com

CONNECTION PLEASE CONTAT US AT
sales(at)fomet.com

IN ORDER TO BE REDIRECTED TO YOUR AREA MANAGER

FONDERMAT do BRASIL

Alameda Mercúrio, 164, Distrito Industrial, 13.347-662 Indaiatuba - SP, Brazil

Contact

Alameda Mercúrio, 164, Distrito Industrial
13.347-662 Indaiatuba - SP
Brazil

Force Motors LTD

Afghanistan

Contact



Afghanistan

Press Releases & News

Force Motors - SIX NEXT GEN SMART MOBILITY SOLUTIONS ON THE FORCE TRAVELLER
21 seater Traveller Smart Citibus15 seater Super luxury Traveller Royale and 9...

Foseco International Limited

Drayton Manor Business Park, B78 3TL Tamworth, England

Contact

Drayton Manor Business Park
B78 3TL Tamworth
England

Telephone +44 (0)1827 262021
Fax +44 (0)1827 283725
Email FosecoGermany(at)vesuvius.com

Representatives Worldwide

Foseco Foundry Division, Foseco Española S.A.
Barrio Elizalde 5
48213 Izurza (Bizkaia)
Spain
Phone: +34 (0) 946 202 500
Fax: +34 (0) 946 203 773
Foseco Foundry Division, Foseco Foundry (China) Co Ltd.
806-807 Innov Tower, Block A, No. 1801, Hongmei Road, Xuhui District
200233 Shanghai
China
Phone: +86 (0) 21 3367 8188
Fax: +86 (0) 21 3367 8188
Foseco Foundry Division, Foseco Golden Gate Company Ltd.
No. 6, Kung Yeh 2nd Road, Ping Tung Industrial District
90049 R.O.C
Taiwan
Phone: +886 (0) 872 281 08
Fax: +886 (0) 872 281 82
Foseco Foundry Division, Foseco India Limited
Gat No. 922/923, Sanaswadi, Taluka Shirur
412 208 Dist.-Pune
Maharashtra-India
Phone: +91 (0) 2137 668 100
Fax: +91 (0) 2137 668 160
Foseco Foundry Division, Foseco Industrial e Comercial Ltda. Brasil
Via Raposo Tavares, Km 15
05577-100 Sao Paulo
Brazil
Phone: +55 (0) 11- 3719-9788
Fax: +55 (0) 11- 3731-0240
Foseco Foundry Division, Foseco International Limited, Middle East Office
Vesuvius Emirates FZE Warehouse No. 1J-09/3 P O Box 49261 Hamriyah Free Zone
Sharjah
United Arab Emirates
Phone: +971 (6) 526 237 0
Foseco Foundry Division, Foseco Japan Limited
Orix Kobe Sannomiya Bldg. 6-1-10, Gokodori, Chuo-Ku
651-0087 Kobe
Japan
Phone: +81 (0) 78 252 2231
Fax: +81 (0) 78 252 2261
Foseco Foundry Division, Foseco Korea Limited
235 Dodang-dong Wonmi-gu, Bucheon City
420-807 Gyeonggi-do
Republic of Korea
Phone: +82 (0) 32 675 3211
Fax: +82 (0) 32 675 7512
Foseco Foundry Division, Foseco Nederland B.V.
Binnenhavenstraat 20
7553 GJ Hengelo
Netherlands
Phone: +31 (0) 742 492 100
Fax: +31 (0) 742 424 125
Foseco Foundry Division, Foseco Portugal Produtos Para Fundicâo LDA.
Edificio Leixôes 3° Andar Terminal do Freixieiro E.N. 107 Apartado 5101
4456-901 Perafita
Portugal
Phone: +351 (0) 229 999 530
Fax: +351 (0) 229 999 539
Foseco Foundry Division, Foseco Pty Limited Australia
No 7, Stuart St.
NSW 2211 Padstow
Australia
Phone: +61 (2) 99 145 500
Fax: +61 (2) 99 145 547
Foseco Foundry Division, Foseco Russia
Kooperativnaya Str. 10
140180 Zhukovsky, Moscow Region
Russia
Phone: +7 (0) 495 221 2511, + (0) 495 221 2512
Fax: +7 (0) 495 787 6114
Foseco Foundry Division, Foseco SAS France
Le Newton C, 7 Mail Barthélémy Thimonnier Lognes
77437 Marne La Vallée, Cedex 02
France
Phone: +33 (1) 64 735 555
Fax: +33 (1) 64 735 556
Foseco Foundry Division, Foseco Thailand Limited
22nd Floor, Ocean Tower 1, 170/69 Rachadapisek Road, Klongtoey
10110 Bangkok
Thailand
Phone: +66 (0) 2 261 3164 67
Fax: +66 (0) 2 261 3168
Foseco Foundry Division, South Africa (Pty) Limited
12 Bosworth Street, Alrode
1450 Gauteng
South Africa
Phone: +27 (0) 119 039 500
Fax: +27 (0) 119 082 380
Foseco Foundry Division, Vesuvius Inc. Cleveland Foundry
20200 Sheldon Road
44142 Cleveland, Ohio
USA
Phone: +1 (0) 4 408 264 548
Fax: +1 (0) 4 402 437 658
Foseco Foundry Division, Vesuvius Istanbul Sanayi ve Ticaret A.S.
Gebze Organize Sanayi Bolgesi 27 Mah. 1000. Cadde 12.Sok No:1022
41480 Gebze Kocaeli
Turkey
Phone: +90 (0) 262 677 10 50
Fax: +90 (0) 262 677 10 60
Foseco Foundry Division, Vesuvius Italia S.p.A.
Via Ravello, 5/7, Quartiere Ravello
20080 Vermezzo (MI)
Italy
Phone: +39 (02) 949 819 1
Fax: +39 (02) 949 430 20
Foseco Foundry Division, Vesuvius Malaysia And Bhd
Lot PT 11693 (Block B) Jalan Pelabuhan Utara, Kawasan Industri Bandar Sultan Suleiman
42000 Pelabuhan Klang, Selangor D.E.
Malaysia
Phone: +603 3176 0508 ext 13, 14, 15, 16, 12
Fax: +603 3176 0608
Foseco Foundry Division, Vesuvius Mexico-Monterrey, Foseco Sa de Cv
Lucio Blanco 232, 10 de Mayo Guadalupe, Nuevo León
67130 Guadelupe
Mexico
Phone: +52 (81) 83 79 6513
Fax: +52 (81) 83 34 3559
Foseco Foundry Division, Vesuvius PT Foseco Indonesia
Jalan Rawagelam II, No. 5, Kawasan Industri, Pulogadung
13930 Jakarta Timur
Indonesia
Phone: +62 (0) 214 605 555
Fax: +62 (0) 214 603 489
Foseco Foundry Division, Vesuvius Scandinavia AB
Förradsgatan 4
662 34 Amal
Sweden
Phone: +46 (0) 532 607 730
Fax: +46 (0) 532 607 749
Foseco Foundry Division, Vesuvius Slavia A. S.
Lešetínská 47
CZ-71900 Ostrava-Kunčice
Czech Republic
Phone: +42 (0) 595 221 412
Fax: +42 (0) 595 221 417
Foseco Foundry Division, Vesuvius UK Ltd.
Tamworth
B78 3TF Staffs
United Kingdom
Phone: +44 (0) 182 728 999 9
Fax: +44 (0) 182 725 080 6
Foseko Foundry Division, Vesuvius Polska Sp z o.o.
ul. Leonarda Da Vinci 5
44-109 Gliwice, Slaskie
Poland
Phone: +48 (0) 323 303 530
Fax: +48 (0) 323 303 535

Press Releases & News

Metef Italia 21-24 giugno 2017
Nuovi prodotti e servizi per l’industria dei metalli non ferrosiFoseco si pres...
FOSECO at Metef exhibition, Italy 21-24 June 2017
New product applications and innovations from Foseco for Non Ferrous foundriesAt...
Fachausschuss „Leichtmetall-, Sand- & Kokillenguss“ zu Gast im Foseco R&D Centre in Enschede, Niederlande
Enschede, Oktober 2016. Auf Einladung des BDG, Fachgruppe NE-Metallguss, traf si...

Information


Foseco – Committed to Foundries Worldwide

Foseco, is a world leader in the supply of foundry consumables and solutions. Our solutions and advanced computer simulation techniques allow foundries to reduce casting defects such as pinholes, shrinkage cavity, inclusions, scabbing, penetration or veining. Hence the Foseco products reduce labour-intensive fettling and machining, minimise metal usage requirements, influence the metal solidification process and automate moulding and casting, thus reducing cost, energy usage and mould size.

The comprehensive range of foundry consumables and equipment for iron, steel and non ferrous foundries includes insulating and exothermic feeding systems, filters for liquid iron, steel and aluminium, direct pour technology, solidification simulation software, non ferrous metal treatment and degassing systems, metal stream inoculation, advanced coatings, environmentally friendly binders, lining systems for ladles and furnaces as well as energy saving crucibles.

Products:

Foseco offers a comprehensive range of foundry consumables and equipment for iron, steel and non ferrous foundries.

  • Furane, phenolic, alkaline phenolic and polyurethane no-bake resin system
  • Polyurethane Cold Box and CO2 set Resin Systems
  • CO2 and Ester Setting Sodium Silicate Binder Systems
  • Additives, Glues, Sealants and Release Agents
  • Coatings for Sand Moulds and Cores
  • Die Coatings
  • Coating Equipment
  • Electrostatic Coatings
  • Coatings for Full Mould and Lost Foam Processes
  • Coatings for the Centrifugal Casting Process and the Production of Rolls
  • Direct Pour Technology
  • Exothermic Feeders
  • Exothermic-insulating Feeder Sleeves
  • Insulating Feeder Sleeves
  • Flexible Boards, Anti-piping Compounds and Insulating as well as Exothermic Preformed Lids
  • Ceramic Foam Filters, Zirconia Filters and Carbon Alumina Filters
  • Non-Ceramic Filters for Aluminium Alloys
  • Running and Gating System Components
  • Refractory Linings for Ladles and Furnaces
  • SiC and clay graphite crucibles for the melting and holding
  • Precast Shapes for Aluminium and Zinc Foundries
  • Stoppers and Nozzles
  • INITEK Initialisation Process
  • Inoculants, Spheroidisers, Fluxes and Slag Coagulants
  • Melt Stream Inoculation and In-stream Inoculation Control Systems
  • Degassing Equipment
  • Fluxes for Drossing, Covering and Cleaning Aluminium Alloys
  • Grain Refiners and Modifiers for Aluminium Alloys
  • Treatment Products for Copper, Magnesium and Zinc Alloys

Also Foseco offers an expanding portfolio of products targeted at the investment casting industry

  • One shot liners and backup crucibles
  • Fine porosity, framed zirconia ceramic foam filters
  • hot topping materials
  • Refractory lining systems for ladles and furnaces
  • State of the art degassing and metal treatment technology
  • SiC and clay graphite crucibles for the melting and holding

FOUNDEQUIP S.r.l.

Via Volta, 17 , 31027 Spresiano (TV), Italy

Contact

Via Volta, 17
31027 Spresiano (TV)
Italy

Telephone + 39 0422 880831
Fax + 39 0422 881824
Email info(at)foundequip.it

Information

Foundequip is a leading supplier in the study and construction of equipment and machines for green-sand foundries. Thanks to its collaborators and its qualified and dynamic staff, it is always in evolution to satisfy clients ‘needs and to offer them a specialist assistance.

The technology used, the know-how, assimilated with a long experience maturated directly in situ, and the cooperation with specialized companies, allow to Foundequip to offer to the clients a customized and high quality product.

Passion, innovation and technology are the characteristics that made Foundequip so competitive in worldwide markets.

  • FOUNDEQUIP S.r.l.
  • FOUNDEQUIP S.r.l.

Products & Services

MOULDING LINES

Foundequip’s moulding lines are realized for the production of castings in steel, cast iron, aluminium and bronze.

These installations are projected and produced in base of the requests of the Client. They could be in different sizes and for different types of flasks, all according to the Clients’ needs and also considering the dimensions of the place where they will be installed.

The heart of moulding lines is the moulding machine. Foundequip can offer to clients different types of moulding machine such as Multipistons moulding machine, “Silent Flex” moulding machine, FastLoop or Shot-squeeze moulding machine.

The more appropriate solution is suggested according to the Client’s type of production and it can be a stand-alone machine or installed into a moulding line. It can also be fully automatic or semi-automatic.

All these machines are realized to require minimum maintenance and they can guarantee a good castings surface and so reduce the moulding scraps.


SAND PLANTS

Foundequip’s sand plants are studied to supply different solutions for the green sand reclamation and regeneration. The importance to have good sand allows us to develop some solutions useful to improve sand quality, and so reduce scraps and increase the surface quality of the final product.

Our technical team offers the more suitable solutions to the client considering its specific needs, both in production, both in location availability.

The heart of these installations is the green sand mixer and the systems for the sand quality control.

The mixers are realized to permit a good quality of mixing with short cycle times which can be completed with devices for sand analysis. These devices are able to guarantee a sand with the required characteristics that become also uniform and repetitive during the time.


WE ALSO SUPPLY :

  • Moulding machines
  • Pneumatic transport systems
  • Shake out
  • Compacting tables
  • Cooling drums
  • Oxicombustion rotary furnaces
  • Metallic conveyors
  • Automatic casting device
  • Manipulators
  • Green sand mixers
  • Moulding plants
  • Green sand preparation and regeneration systems
  • Automatic green sand control system
  • Furnace loading systems
  • Pouring systems
  • Fumes and dust dumping plant



 

Foundry Service GmbH

Sonnenblumenallee 12 (near Grohe Forum), 58675 Hemer, Germany

Contact

Sonnenblumenallee 12 (near Grohe Forum)
58675 Hemer
Germany

Telephone +49 (0) 2372 - 5598 - 0
Fax +49 (0) 2372 - 5598 - 77
Email info(at)foundry-service.de

Manufacturing Skills

DIN 18800

Press Releases & News

Ein gelungenes Ende fand die Arbeitsgruppe „ Handbuch Induktionsofen“ bei der Foundry Service GmbH in Hemer
Die Teilnehmer bestehend aus,• Herr Werner (Daimler AG), • Herr Neurath (Fri...
Handbook for Induction Ovens a Comprehensive Tool for Foundries
The work-group &quot;Handbuch Induktionsofen&quot; (&quot;Induction Oven Handboo...
FOUNDRY SERVICE GMBH IS MOVING IT´S LOCATION !
We will be at our new location after Jan 01, 2016. Foundry Service GmbH, Sonnenb...

Information

Who We Are

The Foundry Service GmbH is one of Europe's leading suppliers of maintenance, repair, re-manufacturing and modernization of induction equipment and crane pouring ladles of different manufacturers.

In recent years, we have time and again come to the conclusion, that the well-known liquid iron transport containers in a foundry can be further redeveloped in terms of process optimization.

Our understanding of modern liquid iron transport containers goes far beyond the mere moving and pouring of liquid iron.

The necessary checks of ladles and accessories are completed in the factory and on site in accordance with the current regulations (eg DIN EN 1247). The dismantled crane pouring ladles are checked in our factory-owned torque testing stand.

All new and rebuilt equipment always leave our factory with the legally required technical documentation in accordance with the EU Machinery Directives.

Foundry Service Simulation
Opens external link in new windowhttp://youtu.be/pjS6FaWN9Vs

  • Foundry Service GmbH

Products & Services

Hier finden Sie unseren Gebrauchtmaschinenshop

Opens external link in new windowhttp://www.foundry-service.de/shop

Furtenbach GmbH

Neunkirchner Str. 88, 2700 Wiener Neustadt, Germany

Contact

Neunkirchner Str. 88
2700 Wiener Neustadt
Germany

Youtube Google+ Linkedin Xing